Search results

  1. Imported Item

    Imported Item

    • JJ95GTID
    • Media item
    • Comments: 0
    • Album: jj95gtid's ride
  2. Imported Item

    Imported Item

    • JJ95GTID
    • Media item
    • Comments: 0
    • Album: jj95gtid's ride
  3. JJ95GTID

    Guess the HP/TQ!

    These Y heads are actually pretty nice. They were take-off parts from FRPP dealers when the Z heads came out back in 2004. They sold them as such and they only cost me $724 to my door for the pair. Back then I was looking at ported E7TE heads which were going for $599 from Powerheads. Found the...
  4. JJ95GTID

    Guess the HP/TQ!

    The time has come at last. Got the dyno tune scheduled for this coming Tuesday. You guess the numbers! HP/TQ at the wheels. My hope is at least 350/350 on a safe tune. The modest combo: Stock block and rotating assembly. Stock cam Stock throttlebody Explorer intake (no work done to it) FRPP...
  5. JJ95GTID

    My baby boy is here!

    x3 Congratulations!!!
  6. JJ95GTID

    Progress Thread One piece headlights

    Update: Fixed my summit racing wideband sensor (re-badge Innovate gauge). Found white wire came loose from ground. Bought a second hand PMAS 80mm sensor cal'd for 42s and a set of 42lb injectors. I want to get my Paxton back in without using the FMU.
  7. JJ95GTID

    Post Your Newest Stang Pic, 94-95 Cars Only.

  8. JJ95GTID

    Progress Thread One piece headlights

    Thanks man. Yeah, I've considered widening the rears but figured this would be the more economical route and immediate way to get the look I wanted. It's on the list but it's way down on there with low priority.
  9. JJ95GTID

    Progress Thread One piece headlights

    Thanks! The pics are deceiving. Every body panel is a different shade of laser red. There's a couple small door dings and some rock chips up front. Other than that it is pretty straight car considering it's age. I did have my wheels recondition to better than new a few years back. I am...
  10. JJ95GTID

    Fuel help with fuel pump/injector upgrade

    Well the 340lph should work. Why not go bigger on the injectors? Say 39lb or 42lb or even bigger. With a 347ci and squeeze you are going to need a tune anyways. Might as well go big with the injectors. I'd ask the people you plan to have tune your car what they would recommend. If you are...
  11. JJ95GTID

    94 gt problems?

    Raw fuel should not come out the exhaust. If anything it will ignite and sound like backfiring. Most likely you have condensed air moisture spitting out the tail pipes. If it truly is fuel coming out the exhaust you could have a weak spark. Maybe a bad coil. Have a look under the distributor...
  12. JJ95GTID

    Progress Thread One piece headlights

    I actually like the Tri-bar wheels and the spacers should be able to handle anything I throw at them. Hell, my brother's Jeep Rubicon Unlimited uses spacers on all four corners and rock crawls with them. His wheels and tires weigh much more than mine.
  13. JJ95GTID

    Couple of questions for u pros....lol

    I'd have to agree with Vib on this one. Do the rear gears to make the car fun to drive with it's current horsepower. Get the paint job done and some wheels to make the car look nice. A good looking car makes an owner proud and want to keep said car. Save up for performance mods...
  14. JJ95GTID

    strange strut noise?

    I run the Strange struts and shocks with FRPP B springs. I had FRPP CC plates and had that awful racket too. I tried taping it up to no avail. You have to go to a CC plate that doesn't use a bearing. Something with rubber or urethane. I put my stock CC plates back on and the front-end...
  15. JJ95GTID

    Progress Thread One piece headlights

    I got them from here: http://stangmods.ecomm-search.com/search?Search=wheel+spacer&Submit=Search You have few options with the stock tri-bars: 1) Cut off the non threaded part of the stock studs. 2) Install shorter studs. 3) drill relief holes in the stock wheels to clear the stock studs...
  16. JJ95GTID

    Progress Thread One piece headlights

    Got some 30mm wheels spacers for the rear wheels. Looks much better :)
  17. Imported Item

    Imported Item

    30mm wheel spacers
    • JJ95GTID
    • Media item
    • Comments: 0
    • Album: jj95gtid's ride
  18. Imported Item

    Imported Item

    30mm wheel spacers
    • JJ95GTID
    • Media item
    • Comments: 0
    • Album: jj95gtid's ride
  19. JJ95GTID

    Progress Thread One piece headlights

    Everyone seems to sell them. I got these from American Muscle. I did have to reattach the rubber/foam piece with some black RTV though. I liked the look of the smoked ones but they were just too dark at night even after I got some brighter bulbs.
  20. JJ95GTID

    Progress Thread One piece headlights

    I'm digging my one piece headlights. Much better than my old smoked set.
Top Bottom
Back
Forums
Menu