Search results

  1. redsn95

    Question for Guys with Nitrous

    i just got right behind the weatherstripping and drilled through the plastic and ran 1/4 inch tubing through the holes
  2. redsn95

    Bump steer

    actually i think upr makes most of steeda's products.
  3. redsn95

    best location to put zex nitros nozzle on intake

    just start off with the smallest shot the kit has and work your way up getting used to using nitrous. you wont feel a lot of difference until you get up to around 125 horses. an msd box would help out on the ignition. id probably run .035 gap and back off an ac22. just my opinion though.
  4. redsn95

    Pro star users inside...

    i run a 15x10 with 6 1/2 backspace with a 28 x 10.5 and i had to roll the fenderlip and beat the inside of the wheelwells smooth. also the quad shocks have to come off. but you should be able to get a 325 or a 315 mickey thompson drag radial it will be tight. also i run a 3.55 gear with a 5...
  5. redsn95

    best location to put zex nitros nozzle on intake

    :stupid:
  6. redsn95

    best location to put zex nitros nozzle on intake

    on a wet shot if you mount the nozzle to far away the fuel will puddle and possibly cause a backfire. the nozzle will work fine behind the throttle body i had two nos foggers drilled into the intake opening and it really woke the car up. it will hit really hard there.
  7. redsn95

    ricer jokes

    you might be a ricer if you think a 50 horse nitrous hit is too much for the street..
  8. redsn95

    3 word posts... join in

    my girlfriends cat
  9. redsn95

    How to replicate Mach 460 bass with aftermarket stuff?

    ive used a scosche adapater and several different head units for about 8 years and have had no trouble with the mach 460. I even replaced the front speakers with memphis componet speakers and they still work off the mach 460. if you want it to really sound off leave the mach 460 and add an amp...
  10. redsn95

    How to replicate Mach 460 bass with aftermarket stuff?

    just get the wiring harness adapter and use an aftermarket head unit. the amps in the rear deck control the mach 460.
  11. redsn95

    ricer jokes

    at the track one ricer looks at another ricer and says dude if i could get some traction i could probably break 17.00.
  12. redsn95

    ricer jokes

    you might be a ricer if you bought an electric supercharger off of ebay.
  13. redsn95

    What is better? LOUD or QUIET supercharger?

    man just get a chain driven procharger those things sound wicked
  14. redsn95

    ricer jokes

    :lol: :lol: :lol: :lol: :lol: :lol:
  15. redsn95

    ricer jokes

    seen this on another site one time..... Twas the night before Christmas and caught at the light, Was a domestic V8 and no cops in sight, I will try, I will try, I will try with this small motor, To beat this darn mustang, even with its big blower, As the light goes green and I pull like...
  16. redsn95

    ricer jokes

    you might be a ricer if your car says Greedy, HKS, or NOS, when its really just a stock, slow civic that grandma gave to you
  17. redsn95

    ricer jokes

    you might be a ricer if you hang out in the performance section at autozone
  18. redsn95

    Msd distributor..Will it fit on my car?

    the plugs between the fox and the sn95 are the same i think all you need to do is lenghten the wires.
  19. redsn95

    ricer jokes

    let's hear your best ricer jokes.. You might be a ricer if you go to the local speed shop to have stickers installed (actually seen this firsthand).
  20. redsn95

    Thinking of CHOPPING SPRINGS IN FRONT

    swap to coilovers and you can put your ride height where you want it
Top Bottom
Back
Forums
Menu