Search results

  1. Aaron 4.6

    Reider Racing differential

    This is probably not the best forum for info on the Torsen as they are not really popular. Try these threads and free your mind: #1 #2 #3
  2. Aaron 4.6

    Delete IMRC

    He has a built motor pushing 18 psi of boost. That much manifold pressure is making it hard for the controller to close the butterfly valves, and he is trashing control boxes as a result. Deleting the system will eliminate this problem, give him a tad more top end power, and potentially make the...
  3. Aaron 4.6

    Turbonator- 65 hp increase for only $69

    What a crock. I won't devote a lot of time trashing this statement, because I shouldn't really have to. The Mustang will continue to develop and new options will continue to emerge. Hell, there are aftermarket companies still devoting significant R&D money on intake manifolds for 302 Fords...
  4. Aaron 4.6

    Turbonator- 65 hp increase for only $69

    That wasn't even close to harsh. Hell, it was almost a wet, sloppy kiss compared to what I really wanted to write. [thread hijack] In case people haven't noticed, there is a life cycle to most web forums just like there is a life cycle to consumer products. In most cases, someone starts an...
  5. Aaron 4.6

    99-02 cobra

    My memory is getting hazy, but according to Ford they made 3. All were crushed. There were none sold to the public.
  6. Aaron 4.6

    Turbonator- 65 hp increase for only $69

    I don't think it was a joke. A guy that registered last month with a 2-3 year old car probably only recently bought the car. As in, bought it last month. Fits the newbie question profile to a Tee. If it is a joke, its worse IMHO. Tornado Opinion threads on Mustang forums are like potholes...
  7. Aaron 4.6

    Turbonator- 65 hp increase for only $69

    Please don't post this crap. I know you are a newbie, but use some cognative dissonance. No one here believes a product exists that will net you 1 hp/dollar.
  8. Aaron 4.6

    Delete IMRC

    Ask and ye shall receive... http://home.flash.net/~ivc1/cobra/imrc.html Its a fairly simple procedure. Just make sure you get all of the holes filled or you'll have hell to pay with the vacuum leaks.
  9. Aaron 4.6

    water coming from exhaust?

    Water is a byproduct of combustion. Since the exhaust has all the combustion products, it will have water as well. The water will usually collect in low spots, but the increased exhaust velocity of WOT is enough motive force to push it out of the pipes. If you look at cars in traffic, you...
  10. Aaron 4.6

    Elec Water temp gauge

    I install that sender into a drain hole in the block. The 3/8 NPT bushing provided by Autometer will screw into the hole, which is on the drivers side at about the mid-point of the #7 cylinder.
  11. Aaron 4.6

    Longtubes for 98 cobra

    I am doing this also this spring, and I will go with the BBK or Hookers. Do a search on MAC, header, and 'oil consumption' and you will find a LOT of people who have hurt their motors using MACs. There are a number of people who have had NO problems, but when dealing with an engine that costs...
  12. Aaron 4.6

    1997 Cobra or 1997 Mustang GT

    Nice post, jerkweed. I actually lost intelligence reading this crap.
  13. Aaron 4.6

    headlamps for 98 cobra

    I have these. Cheap, and NO LEAKS when I installed them. I hate cheap light housings. http://www.procarparts.com/store-detail.asp?sku=FD94MT%2D1436HCX
  14. Aaron 4.6

    Front sway bar?????

    There was a pissing contest thread about this exact topic recently. Do a search. Fundamentally, it allows quicker articulation of the front suspension. This helps transfer weight to the rear and improves the total traction available at the rear tires.
  15. Aaron 4.6

    DYNO--80mm C & L MAF vs. ProM 87mm and the winner is......

    Thanks for the good info. Not much tech on here lately, so threads like this are a breath of fresh air. I rode the C&L bandwagon for a year or more, but I finally came off of some money and went with the Pro-M 95mm setup. No dyno data, but I had the same driveability issues with the C&L. The...
  16. Aaron 4.6

    Sorry, Another "What's My HP" Thread...

    #1. Make that post easier to read. It really discourages people from replying to a generic HP thread when its both IN ALL CAPS and spaced crappily. #2. The cams make it hard to guess with out some lift/dur numbers. They might make great top-end HP and be doggy under 5000 RPM. #3. If this...
  17. Aaron 4.6

    Bucking with timing adjuster?

    I never had any problems. Ran from 11* up to 17* with no issues on my old 99 GT. I have a used T/A that is in a box if you are interested in getting a better price than new. PM me if interested.
  18. Aaron 4.6

    300 rwhp...is it possible NA?

    Not to pick nits, but if you read my post I did not say that it was impossible to hit 300 rwhp with N/A. I said that it was impossible given his constraints. Its not much help when a guy specifically says to immediately respond with
  19. Aaron 4.6

    Differentian cover has slight leak.

    That's a fine place to jack the car. You've identified the only hazard, which is catching the flimsy aluminum cover.
  20. Aaron 4.6

    1996-98 svt cobra owners, get in here!

    I think you are making an EXCELLENT choice in vehicle. The 96-98 Cobra market is pretty reasonable, and you can find good cars anywhere from 10k-15k depending on age, mileage, and condition. Here are some basic trivia that I can recall of the top of my head: These cars will typically make...
Top Bottom
Back
Forums
Menu