Search results

  1. W

    Best Street Brakes without breaking the Bank

    what i have is this and they are very nice, low dust low noise. If you go to tirerack.com and looka the pads and rotors they have. what i have and love are the Brembo OEM size rotors with slots. along with the Gransport GS6 Pads. The pads are carbon ceramic which means very good heat fade...
  2. W

    What goes here?

    THE first picture is your DPFE Sensor. its part of the egr system. The small wire i would have to look into. I wouldn't worry bout the DPFE sensor not being attached to anything.
  3. W

    4" Exhaust tips

    My Mac setup has nice I believe 3 or 3.5" rolled tips. They look nice might want to look into that.
  4. W

    Back in the 2V game again..a few Qs

    I agree with the blower on a stock motor at bout 9psi. but if you choose to stay N/A I would first put if I could do it over again money into a nice intake not just a plenum and cams and some LT's or midlengths.
  5. W

    disentigrated

    if its the clutch i would recommend switcing to Centerforce or Mcloed
  6. W

    Porting Lower Intake?

    dito
  7. W

    17x10.5 DD Bullits + 315/35R17 + Sportlines = Rubbing issues?

    cracula is correct. I have 17x10.5's with BFG DR's on the Back and i have had goodyear F1 GS-d3's . What you will need to do is either roll that inner lip up or cut it off. I cut my off due to not being able to find a fender roller but either or. nothing much at all. Wide ass tires for the win.
  8. W

    Superbowl Predictions!

    BEARS FOR THE WIN
  9. W

    HELP! SCT tuner

    IF your interested in fixing your speedo then buy a SPEEDCAL box. It connects into factory wiring under your shifter to fix the problem. They are fairly in expensive and your can change then setting with 8 or 10 dip switches very easily. here is a link to one sit that has them...
  10. W

    Am I running hot?

    the t-stat i believe is a 192deg from factory correct me if i am wrong. But if its time for a coolantchange. flush it out and change your t-stat. if the problems persist then ask more ?'s lol.
  11. W

    Engine "rattle"

    this might sound strange. but check your oil dipstick. Check the end for signs of it banging into something. I had a guy come in the other day with the same sound and it was a bent oil dipstick. I am still listening to this clip for you though.
  12. W

    Strange sound - NEED HELP PLEASE!

    Correct check fluid level. If you need to add fluid a standard MERCON 5 Transmission fluid will work.
  13. W

    Pulsing Brakes

    the problem you are most likely experiencing is Warped rotors. Yes you can machine rotors sometimes and there is a min machine to specs as to how thin they can be. What happens is if you get close to the machine to limit a lot of times on ford and I see it everyday at the dealership i work at is...
  14. W

    Guys with Aftermarket Brakes HELP

    take the tires off and see if the calipers can be pushed in. If they go in then the calipers aren't seized the pads might be jammed on the slides. if they do not go in then open up the bleeder on the caliper and try again. IF they don't go in when the bleeder is closed but they do when the...
  15. W

    HELP!!! Failed Emissions Beyond Belief

    couple things u might want to try. When doing emissions tests make sure to run your car for a good 30 min b4 you head over to the testing center. What happens is carbon deposits will settle inside your motor and other debris and you want to get them out or at least as much as you can. Sea foam...
  16. W

    Patching Drag Radials?

    ok first things first. everyone is right here with all the techinicallities. Yes patch or plugging a tire uins the speed rating. What I do recommend doing is using a Patch-plug. Not just one or the other. The patch plug if u don't know is like a flat patch with a spike sticking out of the...
  17. W

    Wheel Offset Q

    depends on the size of the rim. On my 9"'s up fron they have a 24mm offset and sit even with the fender and on the rear with 10.5's they have 27mm offset and sit even. if u use a smaller width rim I would recommend just getting some spacers to help with that.
  18. W

    Dealer says new intake gasket, how can he tell?

    I would try this trick but instead of propane use some carb cleaner it will vary the idle when a leak is found so make sure she is good and warm and idling smooth.
  19. W

    Best clutch for power adder with 450+ rwtq

    crapola :ZipIt: :flame: :flame: :flame: :flame:
  20. W

    Tire Size comparison (with pics)

    :stupid: 315 BFG Drags for the win
Top Bottom
Back
Forums
Menu