Search results

  1. At1Maverick69

    Shifter handle thread

    thank you!
  2. At1Maverick69

    Shifter handle thread

    does anyone know what the pitch and size of the shifter handles on our cars, most particularly the Hurst Billet/Plus and the stock ones.. I tried search and the hurst website- no luck.. thanks for any help
  3. At1Maverick69

    anyone catch that new OVERHAULIN!

    One of the best one, but nothing is gonna top the civic :rlaugh: , all kidding aside, I think the wheels were too dang BIG, but very nice car
  4. At1Maverick69

    Beginners Question on Brake Pads

    one thing that never fails is when rotating your tires, always take a glimpse at them, that'll make sure you're on top of everything speciall when you have drum brake still, make sure the shoes and wheel cylinders are ok.. sorry got carries away.. :D
  5. At1Maverick69

    Greetings to the Blue Oval Nation

    I guess you know Corvettes, well, welcome!! :cheers:
  6. At1Maverick69

    LX taillight not sitting flush

    and plus, not to say it of bad taste, but almost everybody has LX tails though, if my GT's look at least a tad better than it does ( I'm gonna try to paint it), I would keep it. I like LX tails, dont get me wrong..
  7. At1Maverick69

    LX taillight not sitting flush

    well, it just bothers me cuz, my car is banged up bad enough by the previous owner, now it looks like the hatch isn't put together right :owned: :(
  8. At1Maverick69

    LX taillight not sitting flush

    is that the case with the 87-93 LX's too?
  9. At1Maverick69

    platinum spark plugs

    he's right! remember newer cars nowadays come with coil-on-plug ignition system compared to ours that's using a remote coil, so newer ignition system has higher voltage output and require the use of platinum for its higher resistance.. Just use stock style plugs... they work good :nice:
  10. At1Maverick69

    LX taillight not sitting flush

    I replaced my GT taillight lenses with a pair of 86 & older pair, but it's not sitting flat with my hatch lid like the old GT lenses was, it looks like the hatch is sticking out more that it was. Do I need the housing to do that? or does it matter if I took it out from a hb or a coupe? I have a...
  11. At1Maverick69

    How do I install a 69 steering wheel emblem?

    you should be able to pry it out with a small screw driver, go around it slowly if you dont want to damage it, good luck!
  12. At1Maverick69

    Post pics of you classic mustang! Ill start.

    [/IMG] here's my other baby.. and like chepsk8 said, there's no such thing as a V6 64-73 mustang, not unless somebody put that thing in there.. and there's no shame in owning a coupe, I think they're nice, and plus you dont really have to be concerned about anything you put in it engine wise...
  13. At1Maverick69

    What sensors will hurt mileage & not pull codes?

    well as an O2 sensor gets older, they tend switch slower and slower, thus affecting your fuel trim, sometimes it's not much to set of a code but enough to hurt milage. i replaced mine at 102,xxx im at 108xxx now, and wow! what a difference. try that. hope this helps! good luck
  14. At1Maverick69

    Strut help ASAP *PICS*

    well, how do they sit right now? any better?
  15. At1Maverick69

    New Exhaust installed but I have leaks??

    I think in one way or another it does hurt your performance, I'd say loosen the nuts and make sure it's sitting flush with each other, then try it again..
  16. At1Maverick69

    So I cracked my lower intake, WTF

    honestly, I wouldn't trust JB weld to hold on to that.. at least get a used stocker fot now.. just my opinion
  17. At1Maverick69

    What is the best way to clean terbines?

    castrol degreaser or simple green. let them soak for a few minutes, they work like magic :)
  18. At1Maverick69

    Windshield Q??

    call another place and check again, cuz we just put a 99 windshield on my buddy's 02, they are exactly the same. never heard of them bieng different
  19. At1Maverick69

    Show me your 69 cars

    hey not fair! Am i the only one with ulgy paint?!?! those cars are to die for... :hail2:
  20. At1Maverick69

    Ugly sound at startup

    yup, check your belt, tensioner and their bearing, pullies and starter bolts, if you still get that noise pull out the starter and bench test it, see if its coming form there check ring gear too. Good luck!
View older results
Top Bottom
Back
Forums
Menu