Search results

  1. U

    Cylinder Head Issue....

    if that is just on the edge of the combustion chamber then I would smooth out the sharp edges and run it if it is not in the fire ring I would not worry about it at all
  2. U

    91 fox fp issue

    the spark when you let off I have seen happen before take a look and see if the ignition switch came apart that is pretty common
  3. U

    Cylinder Head Issue....

    how about some pics. so we can take a look.lay the head gasket on it if it is in the fire ring then it should be fixed. .07 is not much to take off just have the other head milled the same like said.
  4. U

    need some help on exhaust

    yes the 3 chamber will be quieter then the 2
  5. U

    need some help on exhaust

    I hate the sound of SLPs sound like glass packs to me and very loud. I like the sound of the Borlas they sound good and I run the Moroso Spiral flows on my wife's car and they sound great and are priced good also very deep sound but the turbo still hushes things down a good bit also. My son...
  6. U

    Carpet Install w/Roll Cage

    I just split the carpet with a razor and made the holes with the same .if you are worried about it coming up around it you could get some spray glue that they use on head liners and stuff to help hold things down
  7. U

    Any Benefits To Aftermarket Distributor

    Ford stuff works pretty good I have been 10.37 with the stocker and just a MSD coil
  8. U

    5 lug rear swap what drums do I need?

    check the measurement it could be 10in rear brake they are rare but they are out there I got a set on a rear I got laying around it was the first set I ever seen.
  9. U

    engine block identification?

    d9 makes it a 79 block as far as the rest I would have to look up
  10. U

    taurus fan install

    here's one of the top I will get the lower tomorrow its to cold to climb under that thing tonight. Some one asked how we/I wired them up I run mine on a 40amp circuit breaker and a 40 amp relay.. I also made plates that go under the shroud also so the rivets don't pull through
  11. U

    taurus fan install

    I made aluminum tabs and used larger aluminum pop rivets bent the tabs over and they hang on the top lip of the rad. and attached them to the top of the shroud. then took a small piece of metal and bent the end over and drilled a hole in the other end and mount that on the lower core support the...
  12. U

    Supercharged Mustang having fuel pressure issues

    ^^^^^^^^^ ditto
  13. U

    Supercharged Mustang having fuel pressure issues

    I run my F/P at 39-40 with the vac line on and it goes to 42 with it off.
  14. U

    Supercharged Mustang having fuel pressure issues

    maybe the reg is gone bad. How does it run with FP being that low it should be running rough also. maybe the gauge is on its way out. if you could find a way to block the fuel return and then look at the FP if it spikes way up that should help rule out the pump. Have you run over any thing that...
  15. U

    Moroso oil pan, inaccurate dipstick?

    sure, also you got to love boosted cars and oil leaks did you put a one way valve at the PVC? and are you letting crankcase pressure off some where? if not it will leak oil all over soon. as far as that goes it will leak some, some where all the time LOL its boosted. My new motor leaks oil at...
  16. U

    Moroso oil pan, inaccurate dipstick?

    We have a 7qt pan on my wifes car. and I had problems with the dip stick also not reading real good it has a compression fitting on it. I just put 7qts of oil in it and cut a mark in the stick where it is full. no oil smell and the pan fit well. kind of a pan in the ass to work around due to its...
  17. U

    Heads off - stock cylinder walls/pistons? (pic)

    It looks like a aftermarket piston to me. are the valve reliefs bigger on one side then the other or is just the way it looks in the pic.
  18. U

    What is this?

    take them off if you are not running emissions.
  19. U

    Crankshaft... yikes

    5.0 motors are cake to pull. I would not even try to take the crank out the bottom.thats crazy if you do let us know how it went.
  20. U

    Punnting an end to the PROCOMP head mystery *MANY PICS*

    You got a good set. I got a friend that got a set for a Chevy and has had all kinds of problems like PORTS dont line up!!! and the ports are to tall!!! But I also seen someone said that there is 2 companys called Pro Comp. and one sells JUNK.
Top Bottom
Back
Forums
Menu