Search results

  1. R

    something is very wrong

    Try charging the battery and go from there, I am running an ASP overdrive pulley on my alternator and it helps bring the charge up with the underdrives. You might think about buying one.
  2. R

    How To Install Bolt On Sub-Frame Connectors

    Nice write up!, I have the same subframe connectors and like them alot, thery are very good quality. I was lazy and just paid the shop I use the 40 bucks to have them welded in because I don't have a lift and can't weld very good:D
  3. R

    Finally Started!!!!! Won't Idle???

    Counter clockwise retards timing clockwise advances it, check for vacuum leaks.
  4. R

    My Head and Intake Swap Progress/?'s

    I retorqued my upper and lower intake manifold but not the heads, I used the expensive Felpro head gaskets and ARP head bolts and it was my understanding that a retorque was not required when using those gaskets/bolts. My car is running great with no signs of water in the oil so they must have...
  5. R

    gt40 vs. gt40p

    Small block Ford head flow ratings. http://www.allfordmustangs.com/Detailed/630.shtml
  6. R

    Milkshake (oil/water) :(

    A leak in the lower intake gasket can cause water in the oil too.
  7. R

    Anyone Know where I can get subframes welded in atlanta

    Do you have any mufflers shops in your area?, If so I would try one of them. I paid 50 bucks to have mine welded in.
  8. R

    GT40P Heads just arrived

    Yup, 4 bars on the ends. I bolted my GT40P's on unported and picked up quite a bit of power, I am happy with mine.
  9. R

    Fitment questions with GT40P heads.

    The tubes come out further away from the head before they turn on aftermarket headers keeping the tubes further away from the sparkplugs, if you could compare the stockers to aftermarkets you would see what I am talking about. The sparkplugs on the P's come out more on a straightward angle that...
  10. R

    Got ahold of some GT40P's!

    Nope, they are BBK unequal shorties, I just had to use a 90* plug wire on #7 sparkplug. It really wasn't a big deal though.
  11. R

    Got ahold of some GT40P's!

    It took me two full days to install my GT40P's, but I was very meticulous about making sure all of the surfaces were very clean and everything was bolted down to exact specs. The car runs great and 2K miles later everything is fine, very good upgrade over E7'S.
  12. R

    Fitment questions with GT40P heads.

    The intake manifold will bolt up just fine though it will be a major restriction for those heads, there is no way the stock headers will work due to the plug angle of the GT40P heads.
  13. R

    Sub-Frame's

    I am running BBK subframes on my 95 vert and like them alot, they definatley made a big improvment in the drivability of the car. I took my car to a muffler shop and had them welded in for 50 bucks, I didn't want to install them myself since I don't have a welder and a lift:D
  14. R

    Project "Ive Lost My Mind" Getting Underway!

    My guess is twin turbos:D
  15. R

    Looking for opinions on headers...

    Do your self a favor and just get the BBK's, I have a set on my car and they fit perfect. I had to pull them of once when I did the heap swap and they went right back on with no issues whatsoever. Great headers for the money.
  16. R

    PROGRESS UPDATE 1

    Nice upgrade, looks real good.
  17. R

    One Tire Fire

    What a rip, you can bolt in a brand new traction lok for about 300 if you do it yourself. I installed my own gears and 8K miles later everything is still working well. If you have good mechanical ability you can probably handle it. The hardest part is getting the crush sleeve to start...
  18. R

    cobra Intake install' how hard?

    Don't use thread locker on the intake bolts, use anti-seize on the lower intake bolts and as mentioned don't over torque anything. It is a pretty easy swap if you take your time and make sure to double check everything. A trick that works for me when removing the lower intake bolts is to take a...
  19. R

    Am I loosing my F...ing mind

    You will probably lose money, I hate to say it but in reality that is a 10 thousand dollar car at best even with all of the mods.
  20. R

    My cobra intake

    It takes a little longer than 45 minutes lol, I installed my Cobra intake and 6 months later I installed myGT40P heads. If you are not going to do heads for a while I would install the intake, you will feel a difference.
Top Bottom
Back
Forums
Menu