Search results

  1. DTMach1

    Tranny leak

    those were a problem with the T-5's and the old 5.0's...I would NOT have them replace your rear main seal!!!
  2. DTMach1

    Cleaning the engine bay..?

    hmmm I just use mother's back to black, or NXT tech protectant and a microfiber towel... cleans up everything very nice!! I would use simple green on all the hard to clean spots where the grease is pretty bad. there is just something I don't like about spraying the entire engine with...
  3. DTMach1

    03 Cobra vs. Mach 1

    as far as the tranny is concerned there are plent of drag racers still using the TR-3650 w/out issues. Jeff Schmell who races in the NMRA Factory Stock class has made literally 100's of passes w/out issue in his transmission...BTW he runs in the 11's N/A w/out ever pulling the intake or heads...
  4. DTMach1

    1st time @ track 02 gt vs. 04 Mach

    you're times are pretty much on par...like others have posted, you knock down your 60ft, your ET's will follow. as far as the mach, he trapped a little lower than I would've expected...with that 60ft he should've been high 13's not low 14's... probably track prep is what got you...
  5. DTMach1

    03 Cobra vs. Mach 1

    look at first gear ratios... mach-1 3.38 Cobra 2.67 the T-56 is NOT a drag race transmission, that is why a mach will get an initial jump on the cobra.(aside from axles of course) However as stated before, the cobra will start to walk the mach before the 1/8th and end up winning by a car...
  6. DTMach1

    AODE tranny leak???

    re-read that, I was implying that the process is not hard at all, and the hardest part would be refilling the transmission :)
  7. DTMach1

    will 70mm throttle body benefit me?

    that TB will definately boost the power to your cobra headlights and mach-1 chin spoiler!!! but seriously...i'd save the money for that and use it elsewhere...I don't think you'll get much out of it...maybe down the road later, but with what you have I wouldn't spend the $170 or whatever for...
  8. DTMach1

    6 quarts????

    as per scott hoag...6.5 qt's...I don't know if that's just 4v's...or just mach's or what
  9. DTMach1

    AODE tranny leak???

    more than likely the gasket...When I had an AODE in my '97GT, I had all the fluid flushed out and the filter replaced...but the guys didn't replace the gasket, so I had a leak around the pan... the hardest part is refilling the tranny after you change the gasket... If I were you and if you...
  10. DTMach1

    Cold Air Intake?

    it still out performs any fenderwell CAI out there. sealed or not, that heat sheild does provide enough to keep the ambient temps down. I view any CAI as one that attempts to provide colder air into the TB...so I see a fenderwell design and one with a sheild as being the same. Either way...
  11. DTMach1

    Cold Air Intake?

    what do you think the FIPK is???? a cold air intake!! anywhoo...yes you will feel an immediate change in your throttle response. It is usually much smoother. Now, if you're talking about cold air intakes that go into the fenderwell...then that is pointless. It adds another bend and will...
  12. DTMach1

    SLP Loudmouth Install Questions

    this will be an easy mod!!!! But you'll some stuff. First get some wood to put behind the front tires. Jack up the rear end by your differential(the pumpkin) place the jack stands under the the axle at equal lengths. Now you're going to need a sawzall or similar to cut away the old pipes...
  13. DTMach1

    Those running w/ no CATS, please come in...

    it's called the magnusson-moss warranty act, look it up.
  14. DTMach1

    this car is really starting to get to me

    hey man, i really think we should clean out your injectors...and see where we stand from there??? Also, maybe next time at the track we should swap cars to see if maybe a second person would help narrow it down... definately sucks...but we can find the answers!!
  15. DTMach1

    Fed up with crappy 4.6

    I've seen 96 GT's with the same mods and a good tune running mid 12's...you simply can't drive...not with a 2.5 60ft...you had to be lighting those tires up!!! How are you shifting down the track?? Also those 18in tires and 3.73's aren't a good combo
  16. DTMach1

    which tires

    get some toyo t1-s
  17. DTMach1

    Dirt in the gauges!!

    i don't know if there is a way to keep it out...but it's really easy to clean up. Just take your cluster out and you'll see there are about 8 screws holding the bezel around the cluster, take it apart and clean it up! Should take you about 30-45min for the whole thing
  18. DTMach1

    People with SLP Mustang Exhaust

    the sound is awesome!!! the look...well here's the look:
  19. DTMach1

    Tremec 3650 TSB# and after market shifter

    it's really up to your service dept. If you look on tremec's website, they don't seem to mind aftermarket shifters and actually give you advice on them. I'd call your service dept. and ask them if an aftermarket shifter would void your tranny warranty.