Search results

  1. JJFIVEOH

    Anyone Painted there Trim around there Windows?

    That' why I was confused. You're talking about the paint. I was looking for someplace to buy new trim pieces. I've already painted them a few years back, so I'd like to get new trim pieces. My bad. Thanks.
  2. JJFIVEOH

    Anyone Painted there Trim around there Windows?

    What is Menards? What kind of shop are they? I couldn't find anything on the web about them.
  3. JJFIVEOH

    Anyone Painted there Trim around there Windows?

    Does anybody know of someplace where I can buy new trim instead of painting them? I've looked on plenty of websites and the closest I can get is 50resto.com and they only have the lower trim piece. I still need to find the side and upper trim. I plan to do the windshield and back window
  4. JJFIVEOH

    Air check valve pipe removal

    I was just wondering if anybody has removed the air check valve pipe that connects to the heads and into the emissions system. I have had mine capped off for years, but it has become a pain to try and keep it from leaking. I just want to take it off and cap the holes off in the head somehow. I...
  5. JJFIVEOH

    First time C-clip eliminator install

    Thanks for the help. It shouldn't be a problem. I just need to find where I can get a shim kit. I know they exist, but everywhere I have called in the past have no clue what I am talking about. I may just buy a variety of sizes. Advanced doesn't carry them. Maybe I'll go to Circuit City. They...
  6. JJFIVEOH

    First time C-clip eliminator install

    So you probably have the Strange eliminators. The Moser are one piece. I'm not too concerned about leaking that much, it just didn't seem right to me a guess to have metal on metal with nothing in between. Since they go to lengths to make sure everything is accurate and installed perfect then to...
  7. JJFIVEOH

    First time C-clip eliminator install

    I just got my 33-spline C-clip eliminator/axle set from Moser with a spool. I understand everything that is involved and how it goes together, but shouldn't there be something in between where the actual eliminator and rear end housing meet? I know that the ends need to be cut off so that they...
  8. JJFIVEOH

    Inner Tubes with ET Streets.. Are they a must??

    Keep an air tank handy if air pressure is crucial to you. You could lose 1/4-1/2 pound in between rounds. Good point about rotating mass. I've seen people lose .3-.4 seconds running tubes. Be sure to throw a few extra pounds in the tires during the week if the car sits. 1 of my tires loses 4-5...
  9. JJFIVEOH

    Strut/Shock recommendation

    Ok, this is one subject I cannot find much help on in here. I have a 93 bracket car. I am going to replace all shocks and struts this offseason from the originals. It is a drag car only. I do take it on the street very occasionally, but I will not buy according to that. This is my last step into...
  10. JJFIVEOH

    3-core radiators rule

    I had a Modin 3 row for 8 years. Pretty good radiator. I was looking for a Northern that my friend uses locally. It is a thick 2 row, but he has a 14:1 motor and has no problem cooling at all. I was looking for this radiator, but unfortunately I was in a big hurry and nobody supplied it locally...
  11. JJFIVEOH

    Failed Emmissions... Very Badly - Help!

    So 2.2x10^-4 is legal limit. LOL. Cool, Im going for my engineering degree too.
  12. JJFIVEOH

    Failed Emmissions... Very Badly - Help!

    Many places supply this fuel from VP. They can tell you where to get it, all you need to do is call the region rep. They should have a phone number on their website. As far as the 80 PPM, that doesn't sound right. Standard is 220, and I think Cali is 170. If I could see your test results I could...
  13. JJFIVEOH

    Failed Emmissions... Very Badly - Help!

    It was the same here. 220 PPM. My first time there with regular gas and everything else I mentioned was 540. With the VP fuel, it went down to 124.
  14. JJFIVEOH

    Failed Emmissions... Very Badly - Help!

    Do you have a VP station in your area? VP makes a fuel called Motorsport 103. It was originally created for high performance FI cars to meet California standards. It's a 103 octane fuel, unleaded obviously, and it has a detergent additive that cleans injectors yet runs real clean. If you could...
  15. JJFIVEOH

    t5z to aod

    I would go with a C4 or a C6. Contrary to belief, the C6 doesn't hog as much HP as you think. Any of the C trannys will be cheaper to build than an AOD. They will handle more power for cheaper. Try an Art Carr convertor. They will build you a custom convertor based on every single spec on your...
  16. JJFIVEOH

    C-Clip Eliminators (All that I and others should know)

    The Strange C-clip eliminators are 2 piece and tend to leak. Mosers are a one piece and haven't heard about any leaking problems.
  17. JJFIVEOH

    spark gap causing 94gt to lean???

    Is he running an MSD? I have a 6AL and found that my ETs are best at .068 gap. This wouldn't be the reason for it to run lean though.
  18. JJFIVEOH

    Shocks

    I need some opinions. What does everybody recommend for a decent shock replacement for front and back for a 1993 Mustang. I going to install drag shocks during the offseasons, but I need to replace my stock ones right now. It's not a daily driven car, so I'm looking for a decent priced...
  19. JJFIVEOH

    For ppl in the 13's

    I generally run in the 13.8-13.9s depending on the air. C6 tranny, 4.10 gears, spool, Art Carr convertor, 4 cylinder springs in the rear, southside lower and UPR double adjustable upper, original motor with 1.72 roller rockers, 40 degrees timing, 3,460 pounds w/driver, subframes, MT ET streets...
  20. JJFIVEOH

    Will Axles be Necessary??

    So far my stock axles have held up very well. Im running 4.10 gears with a spool and haven't had any problems. (Knock on wood.)
Top Bottom
Back
Forums
Menu