Search results

  1. V8SHME8

    I NEED Caster Camber Plates Bad...

    Bullitt struts and shocks http://www.stangsuspension.com/store/comersus_viewitem.asp?idproduct=287 Pro3i 4 bolt CC plates http://www.partshopper.com/shop/Pro3-Caster-Camber-Plates-79-04-m134.html Do not waste your time with 3 bolt plates, that said it money was less of an object then...
  2. V8SHME8

    5.0 mods for like 500. Have a lot done.

    The shortest distance between two points is a straight line. Any deviance from the line is added distance onto the end, and consequently it will take longer to traverse the distance. If the rear end of the car is not tracking straight with the front suspension, you just added more distance to...
  3. V8SHME8

    5.0 mods for like 500. Have a lot done.

    I agree, having a structurally sound car is over rated and useless.
  4. V8SHME8

    13" Cobra brakes on front, WHAT TO DO WITH REARS out of these 4 choices?!?

    You do know you can use your stock calipers on the 11.65" rotors. Cobra's have the same 38mm calipers and a thinner pad to compensate for the thicker rotor. Get the 179$ conversion from Ford and buy some pads.
  5. V8SHME8

    Can we completely get rid of body roll?

    There is a point of diminishing returns since the larger the swaybar, the greater the reduction in suspension independence. Most guys that run in AI just have really high spring rates. These rates might be higher than most would run on a street car which is why there is a market for the larger...
  6. V8SHME8

    Any T-mobil users and others come in....(kinda long but not really).

    I am totally happy with T-mobile. I have had them for 3 years running now. I always look for a cheaper deal every year, but Tmobile is by far the best bang for the buck. My plan is the 45.99, 1000 anytime and free nights and weekends. Pick up and consumer guide and read what they have to say and...
  7. V8SHME8

    how many people here are in college?

    UF Senior - Forensic Anthropology
  8. V8SHME8

    auto cross questions and tips

    You are leaving some important questions unanswered. Since it is your daily will you be using the same tires that you normally drive on? What size wheels do you currently have (obviously at least 17's)? What is your budget for tires? How many miles would you like to get out of your tires? With...
  9. V8SHME8

    Are twin turbo's worth the extra effort? pics and plans inside

    The turbonetics YTK T88 supports 1500 horsepower in a single application, is that not enough?
  10. V8SHME8

    Stud Mount vs. Ped. Mount

    I would not consider running a cam that is less than .550. Pretty much every cam on the Faq is pretty mild as is your TFS 1. It is not to say that they can not make power or are without their merits, but I would skip straight to the big rectangle.
  11. V8SHME8

    Stud Mount vs. Ped. Mount

    I totally agree that you should probably save your money till you have aluminum heads as Grady has already said. However, something that you might consider is that if you want to run a decent cam, not the totally sissy cams that most guys run, in the .550 lift range you are gonna want studs to...
  12. V8SHME8

    Too much head !!!!!

    In all honesty it depends how high you are reving the engine. If you want to make power all the way to 6250, then I would probably get Yates heads.
  13. V8SHME8

    For all of you handling suspension gurus..

    The reason people think they are good is because they put them in to replace 150k mile suspension where even a totally stock replacement would feel better. The ball joints not taller than stock so there is no incentive to get them. They are supposed to have lower resistance but I doubt you could...
  14. V8SHME8

    Bumpsteer Kit install

    http://www.maximummotorsports.com/instructions/MMTR-1-3-6r1.pdf
  15. V8SHME8

    For all of you handling suspension gurus..

    Adding an additional suspension link like a torque arm or third link bump you into the most extreme category because SCCA is retarded and only wants 84 VW Rabits to be competitive. I am fairly sure that adding a fifth link does the same. Either way that Steeda crap will break on him soon enough...
  16. V8SHME8

    For all of you handling suspension gurus..

    Well, first off that Mach 1 should not be in your class. What class are you trying to be competitive in? SFCs will bump you into the most extreme category if you are running SCCA, but that should be the first mod to mustangs. I would buy MM/Griggs/EVM lcas, the Bullitt suspension package, poly...
  17. V8SHME8

    Gutted 94.... any ideas?

    Oh and if you do not want to shell out for the aluminum block, you can have your iron block lightened. http://lsmeng.com/Block-Lightening.html
  18. V8SHME8

    Gutted 94.... any ideas?

    Tilton makes a Magnesium bellhousing that sells on ebay all the time for 350 bucks and that comes with a mini starter also which is well under the 500 dollar limit. Tiger Racing makes a cabon fiber body panel for every part on the car. You will not find better weight reduction than Alumium...
  19. V8SHME8

    Gutted 94.... any ideas?

    I did not list a single thing that would make the car look gutted other than the carbon fiber trunk which is a pin on, but it saves 30 pounds. What was the point of you asking for suggestions if you are not happy with what I or others had to say? Do you think there is some magical 100 pounds...
  20. V8SHME8

    Gutted 94.... any ideas?

    The search feature has plenty of information on this subject, people are just really lazy these days I guess. No smog No heater core or anything that has to do with climate control lol Alum heads All front assemblies deleted except for crank and alt Manual rack Aluminum front and rear...
Top Bottom
Back
Forums
Menu