Search results

  1. stephen4785

    When to adjust rockers?

    Just rebuilt my motor and i used comp cams roller TIP rockers.Its a hyd-flat tappet lifters and cam.After i adjust them for the first time do I need to readjust them once its run at operating temp?
  2. stephen4785

    Results of the autopsy

    I had installed those braided hoses in my car.Well when you cut them to length little pieces of metal get everywhere.When I rebuilt it I found those with the cam and in the bearings.But now Iv got a new crank,cam,pistons,intake,carb and lot of other stuff
  3. stephen4785

    show off you license plate

    BLU BY U. I saw that one on a mustang before
  4. stephen4785

    1968 351W heads or the ET7E's

    Im gonna look into them.The heads have already been machined,new vavle guides,new valves,new double springs,vavle spring shims,roller rockers,hardened seats installed, and everything has already been checked out.The only thing I had to pay for was to get them checked out.I like the sound of that...
  5. stephen4785

    1968 351W heads or the ET7E's

    Iv got a set of 1968 351 W heads.Would it be better to get a set of the ET7E( it think thats how it spelt) or stick with the 351W heads.
  6. stephen4785

    X-Pipe Sound Question

    go to www.mustangexhaust.com and you can hear alot of different exhaust clips of cars with x,H pipes cats and no cats
  7. stephen4785

    Does anyone know how to hook up a Hurst line lock

    if you were to mount the control solenoid on your driver side fendr and have the "H" facing you then the port on the left is in and the one on the right is out.
  8. stephen4785

    Anybody with a compcam 280H have a video or clip?

    Im about to install a comp cam 280H in my car and would like to hear what it sounds like.Iv heard one on comp cams website but the quality is horrible.If you have a video or sound clip please post it.
  9. stephen4785

    In Texas and want to hear exhaust?

    I live in Fort Worth and I trying to figure out what exhaust I want to run on my 65.ANyone in the Dallas Fort Worth region with a good exhaust setup?And yeah Iv tried to listen to some on the comp but my speakers suck and you cant tell how loud it is untill you hear it in person.
  10. stephen4785

    rod bolt replacment?

    Well I just learned that if you replace the rod bolts you have to get your rods resized.Which for me costed 95$
  11. stephen4785

    resizing rods?

    what do they do when they resize rods?I took my rods and old pitson up to the machine shop and Im gonna replace the rod bolts with ARP and he told me that I needed to get them resized.
  12. stephen4785

    rod bolt replacment?

    Im thinking it justy depends on what year mustang you got.On my 65 theres a bar underneath the pan and you can remove it with two bolts.If youve got a k member then I dont think you could
  13. stephen4785

    got a sound clip of your camed car?

    I want to hear or see some video of some cars with cammed 302's.Please post your clip and what cam your running.
  14. stephen4785

    sound clips of cars with cams.

    Im gonna put a comp cam 512 something cam.Dont know the exact spec cause my friend is giving me the cam and cant remember anything other than that.And yes its a brand new cam.I would like to hear some 5.0/302 with cams.Please post what kind of cam youve got and a sound clip or video if you...
  15. stephen4785

    Anyone used Toatal Seal's "Quick Seat"?

    I bought the stuff and Im gonna try it out.Doesnt seem like theres enough in this tiny container to do 8 cylinders but the package says a little goes a long way. It was suggested ine the desricption of the gapless rings I got.
  16. stephen4785

    Adjusting roller rockers?

    Thats the correct procedure.Try it out this time and see if it doesn it again.If so just clean up the rocker and everything thendap a little lock tite blue on there.
  17. stephen4785

    Body Work Progress Pics

    you can get it a Autozone or Orielly's.The 1 gallon can is like 20-25$.Everytime I use the stuff I get it on me.Not alot but I always keep a 5 gallon bucket of cold soapy water and a scrub brush around to wash off my skin if it gets on.Like today I was putting the bumper/grille/and valance back...
  18. stephen4785

    Body Work Progress Pics

    Theve got this stuff called "Aircraft Paint Remover" it comes in a blue can one smller and a one gallon size.You can get it at most parts stores.Stuff works great.Just dont get the spray and dont get any on your hands or any other surface you dont want to strip.Also if theres any paint left for...
  19. stephen4785

    67 68 R model racing apron pics

    http://jr.stangnet.com/mustang.htm I like Jeffs grille.
  20. stephen4785

    The evil bolts that destroy my tools...

    As far as liquid penetrate's my favorite has to be P.B. blaster.You can buy it at Orielly and the stuff works great.As far as your broken off bolt the only thing Iv ever been able to succesfully remove that kind of a break is to find a piece of metal that will fit int the hole.get an arc welder...
Top Bottom
Back
Forums
Menu