Search results

  1. trbkrb

    Got to check out an 2010 Mustang up close

    I was looking at them today too. I drove by the dealer yesterday, saw that they had some in stock (some nice Roush versions too!) but it was raining so I didn't stop until today. Besides I don't like the salespeople and they are closed on Sunday. They didn't look too bad, but I want to get...
  2. trbkrb

    Popping in rearend after axle swap

    I talked to my friend, and he suggested to try and see if the pinion bearings have any play in it by pulling the driveshaft back and forth. If it moves in and out, the bearings are bad. I plan to look at mine this weekend. Maybe mine has been going out for a while. I had bad vibrations a...
  3. trbkrb

    Popping in rearend after axle swap

    I have a similar clunk in my TC rearend. It is being amplified by my aluminum driveshaft so that every time I get on the gas, shift or lift, it clunks. I get the noise when rocking the car too. Thought it was the u joints, but they are hard as a rock, and the driveshaft is only a couple of...
  4. trbkrb

    late model to fox body

    Mike, Mustang5L5 on here has done it. He used the contact plate from a pre 90 wheel that he attached to the newer wheel so the horn would work, and mounted it on his 88 column. He has pics on one of his threads...
  5. trbkrb

    1987- 90 seats the same as '91 - 93 except headrest?

    Fox sport seats came in 3 styles, 87-89 with adjustable thigh support and large headrests, 90-91 with adjustable thigh support and small headrest, and 92-93 with solid seat bottoms and small headrests. Now I would assume the 87-91 seats themselves to be the same, with the only difference being...
  6. trbkrb

    Interior Piece Help Needed

    ebay or a salvage yard or the classifieds. Which side is it? Color? It is the part on the quarter panels, right? It is the 92 LX? I have a few, might have one to fit yours.
  7. trbkrb

    a/c clutch died... lil help?

    Most likely it is the 6P compressor if it is factory AC. I believe the Sd unit is dealer installed air. There are pics on the Autozone.com website. I know mine is the 6P style, factory air. And yes, you do not need to evacuate the system. I replaced mine several years ago. You will need...
  8. trbkrb

    Convertible door panels in coupe

    Is the coupe all electric doors? If so, then the only real difference is the chrome trim at the top of the door panel. It is cut short on the coupe to allow for the mirror corner plastic. If the coupe has manual windows, they will not work at all. The door differences are with the door...
  9. trbkrb

    05+ Wheels on fox using 96+ spindles and axles?

    Really only the wider SVO/ Mark VII rear end or say a 99-04 rear end would look right with the 05+ wheels in the rear. Here are the dimensions: 94-98 SN95 is 3/4" wider per side, total of 1.5" 99-04 is ~1.55" wider per side, total of over 3" SVO/Mark VII is 1.25" wider per side, total of...
  10. trbkrb

    How To: sn95 seats (04 cobra) in a fox coupe (MANY pics)

    I guess he moved his pics. But I have many pics of mine in this thread from a few years ago: 2002 seats in a 1991 GT How to get them in?! - Corral Forums Here is a pic:
  11. trbkrb

    A/C Question

    AC was definitely an "Option" on the window sticker, mine was $788, one of only two options on my car, the other being the 5.0 Liter package. Now did dealers buy cars without AC, probably only special order. Who would buy one without it, very few people. I have seen a few guys on here with...
  12. trbkrb

    What flare wrenches for the MC and prop valve?

    I just got my hands dirty for you! On my car, both of the PV fittings fit a 11mm or a 7/16" flare wrench. For the rear MC it took a 12mm, while the front it took a 14mm. I didn't have any other SAE flare wrenches in my tool box to try. They were all a bit loose fitting, with the 11mm fitting...
  13. trbkrb

    What's the story with your 'stang?

    Back 22 years ago, on March 28, 1987 my wife and I were out looking for a new Acura Integra for her. We bought a new Mazda Cab Plus pickup the prior year (which was to be mine, but she drove it because I wanted her to have the new vehicle). So we went to a dealer on the other side of town...
  14. trbkrb

    Really annoying beep noise

    The clockspring is a spool of wire that powers the airbag and the functions on the steering wheel and is located in the column below the airbag. It is usually what fails due to years of turning the steering wheel, but you should check out the codes. Here is some info: Mustang Air Bag...
  15. trbkrb

    Really annoying beep noise

    Airbag computer behind the radio. It beeps if there is a problem with the dash light to let you know there is a problem with the airbag system. Does the airbag light come on when you start the car? It could just be burned out, or you could have a wiring problem like with the clockspring in...
  16. trbkrb

    Relieving fuel pressure with no tools?

    I press in the schrader valve fitting on the fuel rail under the hood and use an old towel wrapped around it to catch the fuel that comes out. Good luck!
  17. trbkrb

    Rear disc brakes in a FOX

    His car is a pre 87 model, yours is a 91, two different brake systems, so what bolted right in for him will not work for you without modifications. Like Mike and I said, get the 93 Cobra parts and the 3 to 2 port conversion to join the two front lines into one and that is the correct way to the...
  18. trbkrb

    Rear disc brakes in a FOX

    There is no MC that will work with no mods due to the 3 port design of the 87-93 Fox cars. You will have to use a 3 to 2 port adapter setup to run any of the rear disc brake MCs. Probably the best combo for you is the 93 Cobra MC & BB since it is the same as the TC rear with V8 front brakes...
  19. trbkrb

    Need trim for 92 lx. where to get?

    The stock mouldings are both rubber and plastic. The ones between the wheels are rubber to absorb door dings, and the ones next to the bumpers are plastic. Just make sure you get them from a LX, as the GT mouldings have a wider strip on them.
  20. trbkrb

    Rear disk swap

    I have a newer Fox booster in my car - I replaced it a year before the 5 lug conversion. It stops fine on regular stops, but is HARD on panic stops. Altering the strut tower is just a fact most of the time if you want the best performance out of SN95 brakes, and like the guys said, the 93...
Top Bottom
Back
Forums
Menu