Search results

  1. 38stang

    Yup.....i'm Still Here....lol

    same here I come around every 3 months or so to see whats going on.
  2. 38stang

    1994 Mustang Repairs

    Follow the instructions to a T and you should be ok. I'll help in any way I can. On a nother note. I'll be installing a new hydraulic cylinder on the drivers side of my wifes car in a week or so I just orderd it to day, it died right after the top install 6 months ago.
  3. 38stang

    Bullitt Rims

    those are the best wheels ford ever made for the mustang. I have them on all 3 of my mustangs
  4. 38stang

    1994 Mustang Repairs

    I installed a new top on my wifes 02 GT. If you have never done it before or do not have proper instruction DO NOT DO IT. If you want to do it any way go to latemodelrestoration and order the installation CD. It will save your ass. I picked it up and watched it 4 times before doing the install...
  5. 38stang

    Tri-Ax shifter problem

    I had the same problem it took about 25k of driving for it to work its self out.
  6. 38stang

    apparently I'm gay for buying a v6

    I have a 450hp v6. I say their the gay ones, looking at my a$$ as I leave them in the dust.
  7. 38stang

    1994 3.8 Computer Code Help

    the code is on the black cover plate on the pcm opposite end from the wiringharness plug in. if it is not there then it fell off into the body well or some one took it off. if you cant find it your sunk.
  8. 38stang

    Vibration when accelerating

    we need more info. what is the year of your car, how many miles are on it and give a little more detail. are you easing on the gas or hard on the gas. and what dose it do at low throtlle and wot is there any change in vibration.
  9. 38stang

    3.73 gears

    3.73's will work very well in your car. you should see a .4 sec drop in the 1/4 mile going with 3.73's. At 65mph you'll be running at 2300rpm its not that bad, if you go with 4.10 gears you'll be at 2800rpm at 65mph. I dont like high reving a stock engine for long periods of time on the highway...
  10. 38stang

    Gear ratio

    you have a 7.5 rear end and if you want to keep the same rear gear ratio just use the gears you have.
  11. 38stang

    My customary once a year post

    I've still got mine. 13 years and counting. I ordered a new 05GT back in 05 and drive them both ever week.
  12. 38stang

    oil temperature and water temperature gauges

    no you can't. the gauges should come with the sensors they need.
  13. 38stang

    High rev electrical issue

    You need a alternator. the bulb comes on if the voltage from the alt. gose lower than 12 volts or higher than 15 volts. your battery voltage with the engine running shoud be between 13.6 to 14.8 if not then you need a alternator. In your case the light is coming on at high RPM. that usually...
  14. 38stang

    I want LOUDER!!!!

    I have JBA long tube headers, off road H pipe and roush off road muflers on my 05 GT. it sounds awsome. it sounds just like a GT cup car and is loud as hell.
  15. 38stang

    Removing Stains On White Stripes?

    I've got the same problem. Nothing I have tried has got it off yet.
  16. 38stang

    Cylinder head/valve problem

    What was your reason for pulling the motor down? It looks like the head gasket on that cylinder was starting to leak.
  17. 38stang

    2000 Mustang Reverse Transmission Prob.

    It sounds like you need a trany rebuild.
  18. 38stang

    code C1284 and U1262

    Your codes are as follow. P1262 Cylinder #2 High To Low Side Short P1284 Aborted KOER - ICP Failure Possible computer of module related.
  19. 38stang

    2000 Mustang Reverse Transmission Prob.

    You didn’t say if it was a manual or auto. If it is an auto it’s time for a rebuild and if it is a manual it’s time for a clutch.
  20. 38stang

    CODE 1413 - Any Ideas???

    It's just an electrical fan motor unplugging and reconnecting it will not fix it. If it's bad it will have to be replaced.
Top Bottom
Back
Forums
Menu