Search results

  1. P

    Newbie With Hazard/Turn Signal Flasher question???

    :nice: what he said. If you put your LED's in, the signals will hyper blink, but you can use a load controller (just a resister) to simulate a standard bulb. Check out this link. http://www.superbrightleds.com/pdfs/load_resistor_info.pdf Hope this helps some.
  2. P

    Doors automatically locking when driving?

    The auto does look for the car to come out of park and then make a VSS of 5 mph. With a manual the logic could be writen to see engine start, trunk and both doors closed and finally VSS of 5 mph for say 10 seconds --> lock. No function to unlock automatically as the doors will open from the...
  3. P

    3V Spark plug change hell

    The 3v 5.4 and 4.6 use the same size plugs however; the stock Mustang GT plug is one heat range colder than the stock F150 plug. I have seen the Saleen S/C kit for the truck coming with basic Mustang GT plugs. So the plugs that Champion is offering for the truck would not be a good Mustang FI plug.
  4. P

    HOOD PINS NECESSARY??

    If you don't want them you could send them to me, I will dispose of them safely for you at no charge. :D
  5. P

    New car, new exhaust!!

    I have the same Bassani's as well as a off-road x-pipe. I would suggest that if you do go with a off road pipe, go with a H-pipe. My car sounds rather raspy with the X-pipe. I wish I would have bought a H myself.
  6. P

    Signs you need a new clutch?

    Or maybe Santa put a set of 5.13's in your rear for x-mas....lol. :nice: My clutch let go at the track during a burnout, my buddy on the side line said almost as much smoke came for the bell-housing as the tires. Not a good night.
  7. P

    Sub Frame Connectors on 08 Vert?

    The S197 is still a uni-body car. No full frame.
  8. P

    Stock HID lights

    I know that alot of the cars from Europe that use the moveable shield for the high beam operate that motor off of a 5v DC. Quite a few people have cooked there retro fit by putting 12v to that lead. The factory Ford wire manual I have does not cover the '08 cars. I will have to look into getting...
  9. P

    can i change my lug pattern?

    Checkout this site www.ezaccessory.com They have 5 lug to 5 lug adapters as well as a few 6 to 5 adapters. Just remember that the first lug pattern is the truck the second pattern is the wheel. From what I could find both of the trucks you spoke of should be 6 lugs hubs. The Chevy is a...
  10. P

    Help build Mustang parts Search

    I have used the following without any negitive experiance. www.dynotune.com For my fuel PSI gauge, nitrous switch panel, nitrous jet, fuel rail adapter. www.lethalperformance.com For my BMR rear swaybar relocation kit www.brothersperformance.com For my RAM clutch kit All of...
  11. P

    Xenonworx dual beam HID install help

    Installation Notes: The dual HID H13 kit for 2005 and newer Mustangs does not use a plug. The harnesses will have three wires: blue, white, and brown. These wires plug directly into the connectors. Blue Wire = High Beam White Wire = Low Beam Brown Wire = Ground
  12. P

    Nitrous WOT

    I actually have a ZEX kit so I did not need one seperate, but I am glad I was able to help you out a bit there.
  13. P

    Nitrous WOT

    Not so fast man, just because you input WOT the computer may not be giveing an output of WOT just yet. You could damage your ride like that. ZEX offers a digital box that runs off of the TP sensor that will turn your nitrous system on. On a side note don't you love the Dyno Tune Nitrous...
  14. P

    Cheap skinnies and fatties options??

    What are the spec's on your rear wheels? I would like to get as much info from you as I can as far as width and backspacing. If possible could we see a pic of the rear tires from the back of the car looking down the side of the car to get an idea of how close to the fender lip the tires get...
  15. P

    Whipple install....leaky intercooler

    Love to see a pic of it....
  16. P

    Driving/Fog light mod

    The stock "fog light" bulb is a white light, which is not good in the fog. The bulb size is a 9145, which is the same as a 9005 exept the 9005 does not have the gray coating on the tip. I went to my local import shop (yes that was a diffent experiance), and picked up a pair of yellow HID...
  17. P

    Whipple install....leaky intercooler

    All I could find was the mounts at brenspeed.... http://www.brenspeed.com/mustang_2005/images/6505.jpg 1/2 inch of drop, don't know if that's drop enough for you.
  18. P

    Whipple install....leaky intercooler

    Before you cut the hood, I think it's Saleen (or Roush) that makes an engine mount that lowers the engine so their Blower will fit under the hood. I can't recall who made them right now, but I do remember reading about them a year ago or so. It may be worth asking around some.
  19. P

    S197 rear quarter "dents"???

    My 06 GT coupe has them, I first noticed the one on the drivers side and think that it has been getting bigger. I have never had slicks or drag radials on the car (owned it since new).
  20. P

    Nitrous peeps, let's see your switch set ups

    I am running the switch panel from dynotune. www.dynotunenitrous.com/store/scripts/prodView.asp?idproduct=88 I have a 3 pod A-pillar setup with the switches in top, the wide band in the middle and fuel PSI in the bottom. Looks clean and can be removed without leaving a bunch of holes.
Top Bottom
Back
Forums
Menu