Search results

  1. shawn13

    head id #s

    The heads on my 89 gt has the id #s 8j8 and 8j7.... what are these from and how can I find any thing out about them thanx, Shawn
  2. shawn13

    URGENT : In the middle of drag strut install...

    put the shaft in a vice then then try it with an impact gun..
  3. shawn13

    Machine shops

    myfirstii If you want call delong ford in Dwight ask 4 john 815-584-3016 he can fix u up LS-what so whats going on this friday and where at thanx
  4. shawn13

    Aerostar driveshafts?

    It needs to be from a 92-93-94 aerostar AWD and u will need u-joint part #353 from NAPA. just did it on mine bolted right up after the u-joint swap
  5. shawn13

    aerostar drive shaft

    help any body
  6. shawn13

    aerostar drive shaft

    no I didnt I was hopping somebody know the part # for the u-joints.
  7. shawn13

    o2 wiring harness question

    If I remember right it hooks to your oil senser in the side of the oil pan(drivers side)
  8. shawn13

    aerostar drive shaft

    I,m positive same lenght but the but the stock stang joint are longer makes me mad I just rebuilt my posi and put 4.10s in and cant drive it
  9. shawn13

    is this a blown headgasket?

    pull your plus look at them the really clean ones will be the bad hole if you can see the tops of your pistons some times you can see anti-freeze
  10. shawn13

    aerostar drive shaft

    The guy at the junk yard said it was from a 93 aerostar AWD. I got a 89 GT T-5 trans and stock rearend housing
  11. shawn13

    aerostar drive shaft

    same lenght just different size u-joints
  12. shawn13

    aerostar drive shaft

    I picked up the alum. drive shaft but my u-joints are diff. I cant put my ends on it any body know what u-joints I need thank you
  13. shawn13

    First mod for Street/Strip Suspension Advice

    by far the best mod I did was replased every bushing in the drive line(prothane bushings) and did the torque boxs and ball joint checked all the break lines replased the rubber ones if your all tore apart do it then I dont want to worry about stopping my car Im to old to die from something I...
  14. shawn13

    GT-40 intake, is it worth $600

    TMoss is selling the explorer intake all done tb injecters I think he said fuel rails too ready to bolt on and go ohh yah ported to your heads get a hold of him it was a really good price
  15. shawn13

    Plugging holes on Heads where Smog Pump Lines connected?

    napa sells small plugs like freeze plugs pop them in it works great
  16. shawn13

    Help truck tranny? measure tail?

    you want the one from a all wheel drive some are steel some are alm u want the alm one
  17. shawn13

    Found Coolant Leak...Still Need Help!

    make sure it aint hot and just unhook them
  18. shawn13

    Clutch Cable

    when I put my urp quadrant on I filed the edges so it would be smooth it was kind of rough
  19. shawn13

    Found Coolant Leak...Still Need Help!

    the plastic rubber lookin circle is yor a/c drain sounds like your heater core is bad bypass the heater core that will save you an a/c recharge
  20. shawn13

    How do I adjust my clutch with adjustable cable?

    should of really had the fly wheel checked but if the cable nut is set at the end off the threads I would get a fire wall adj. and put the stock cable back on dont get another plastic adjuster they flex around to much with a hd clutch
Top Bottom
Back
Forums
Menu