Search results

  1. E

    3 PRONG HEADLIGHT CONFUSION

    Hey yall, I have been stumped by a simple headlight prong issue. I have two schematics contradicting each other concerning the 3 prong headlight. Question is: If you look at the back of the HL with the prongs in a pyramid shape, which is the Hi, Low, Gnd? :shrug:
  2. E

    TCP Manual Rack vs TCP Power Rack opinions/experiences

    Did my fair share of Investigating this I cant count the hours I spent on the Manual vs Pwr Assist. I new I wanted the best quality I could get. So I determined the TCP was the winner there. Then posing the Man vs pwr question to many different mfr about their products it came down to this. I...
  3. E

    rack and pinion

    I did much reading on this issue and even considered going the do it myself route of adapting one to my 69(Electro-Mech Designer here). I had already purchased the coil overs from TCP. I knew I wanted a quality system and no BS. So finally decided on the TCP manual R&P. Pricey YES! But man what...
  4. E

    1968 mustang oil pressure guage connector

    I AGREE I totally agree with the connector configuration. they are black 90 degree connectors. Also, make sure they fit snugly onto the stud. I had one of mine roast itself on the manifold once. If they dont fit snugly then gently use a pair of pliers to close the gap. look inside and you will...
  5. E

    Wireing Problem..

    Hey, Nice wiring diagram :nice:I have been searching for good legible wiring diagrams for a 69 Mach I , I have Jim Osbourn manuals that are copies of the FOMOCO originals. Naturally I have found errors. I have a Hot Rod Wires 18ckt harness that I am trying tof figure out. Any idea where you...
  6. E

    My last electrical gremlin? One brake light...

    Before you go sanding the tin plate or other plating from the terminals. Try using steel wool and then use the Conductive grease. The copper under the palting is affected more by the elements than the plating. Also use the same steel wool and grease on the screw.
  7. E

    HOT ROD WIRES HARNESS ON A 69 MACH

    Anyone got any suggestions on how to decipher the (Bowtie colors):notnice: wires to the factory FOMOCO color scheme? I have elec background but man there seems to be a lot of wires missing from the pathetic destructions.:shrug: SO Sorry.:( Well basically, the Hot Rod Wires is a...
  8. E

    Thanks

    Good job on this build. quick question tho. Whos wire harness and where did you mount it. Did you check for accessibility now that all the other "stuff" is in and would you mount it there agian? Thanks for the great pics. Mine is ready for assy and I can wait
  9. E

    Heater Coil??

    A/C Car ? I have a 69 w a/c and it had an issue with leaking coolant. It did not show up on the floor board due to the condensation tube for the a/c which drips it right on top of the exhaust manififold. Tricky huh? Replaced htr core on prev 69(non a/c) and it was a full day job. Pary it is just...
  10. E

    Which Assembly Manual is best?

    Thanks for the advise. I went with Jim Osbourn manuals and am very disappointed by the clarity of the electrical schematics. I contacted them and was told basicallly they are what they are.!
  11. E

    Stuck in a Body Shop dilemma...

    Ohh my!!! Have you checked out how much a reputable shop charges? I had my 69 Mach in the shop for 11 months and 4x what you have spent and is about ready to come home for final assy. Floors, qtrs paint and body panel assy is expensive. I seem to think you are getting a good deal. Its just the...
  12. E

    Which Assembly Manual is best?

    Here we go. My restomod 1969 Mach I is coming home after 11 months for its final assembly. I am wondering what Assembly Manuals yall have used?:shrug:
  13. E

    302 VALVE COVERS FIT 351W???

    Are tall valve covers required for roller tip rockers? Hey all, Thanks. :hail2:Saved me some bucks on that one. Now, can roller tip /full roller rockers clear standard height valve covers?:shrug: 1969 Mach I 351W, C4 Auto TCP Coil overs & Manual R&P
  14. E

    Tall valve covers for roller rockers?

    Could any one tell me if the tall valve covers are required to clear full roller or roller tip rockers?:shrug: 1969 Mach 1 351W, C4 Auto TCP Coil over and Manual R&P Vintage Air A/C
  15. E

    What would you guys do?

    Oh how I recall being where you are. Hotrodding was my life, then the wife kids and house came along and the hotrod had to be garaged. I held onto it for 25 years. As life goes, the wife has skipped(along with the boat) and the house but I still held onto my ride. I have since relocated and...
  16. E

    Metal In Oil Filter

    I would seriously look at the timing chain sprockets and also a valve spring retainers. Running and backfiring are not good sign at all. But one thing is for sure. You need to oper her up. Good luck.
  17. E

    302 VALVE COVERS FIT 351W???

    I was given a pair of 302 M/T aluminum valve covers. Anyone know if they will fit a 351W?:shrug: Motors are vintage 1969.
  18. E

    Keepin it all cool.

    I am looking for a 3 or 4 row radiator for a 69 Mach I 351w w/air,ps.pb at reasonable price. Any suggestions? Dern hot here in Houston, TX. :shrug:
  19. E

    Help with Power rack and pinion for 1969 mustang 302v8 power steering?

    I am in the same process of determining a good R&P mnfr. TCP does have an impressive strong looking design and does weight more. I guess when I replace the A/C Comp I will shed some weight there. My question is: Power or non Power? 351W weight between towers.
View older results
Top Bottom
Back
Forums
Menu