Search results

  1. 6

    Hood choices?

    I vote for the GT350 hood.
  2. 6

    Pre-purchase inspection (TEXAS)

    Whoa!! I wish it was closer so I could check it out for you. Maybe someone on here is closer than 400+ miles like me. Sorry and good luck.
  3. 6

    Pre-purchase inspection (TEXAS)

    What part of Texas are you talking about?
  4. 6

    C4 transmission filter?

    Give this picture a look, hopefully it will answer your question.
  5. 6

    need help picking out C4 tranny

    Just had my stock C4 rebuilt locally in Ft. Worth for $550. The price included a new torque converter, your choice of stall, I went with a 2000 stall, beefed up valve bodies, beefed up clutches, transmission cooler and a shift kit. The shop said the build is probably good to about 400HP. Man...
  6. 6

    1967 Mustang Rims

    http://www.dodgestang.com/Tire%20Fitment%20Guide%2067-8.pdf
  7. 6

    Your Stance!!

    Wheels: Torque Thrust II 15x7 with 3.75 BS Tires: 205-60 Front 225-60 Rear Suspension: 620's with 1/2 coil cut and HD leafs with 1.5" lowering block
  8. 6

    Styled Steel Wheels 14x5 and Tires

    Four styled steel wheels, 14x5 with 205-75-14 Fisk tires, backspacing is 3.75. Wheels had red mustang center caps but NO lug nuts. Wheels and tires have a few hundred miles on them and are in perfect condition. I had them on a 65 Mustang but they will fit many others. Would really like to sell...
  9. 6

    1977 cobra II full race

    Where are you located at?
  10. 6

    Gold Package??

    You should try and get a couple of pictures of the "gold package". I would love to see this.
  11. 6

    Lowering springs...

    Did my front suspension about a month ago which included a set of 620's. It took me three tries to get the stance I was looking for. First install with 620's actually raised the front end above where the stock sagging springs sat, even after driving around with the new 620's it was too high...
  12. 6

    620's coming unseated

    No i wasnt aware of the spacers, but then I didnt know that the springs were going to be that short either. I dont think there will be any problems I cant handle, I will get used to the springs being short.
  13. 6

    620's coming unseated

    Not real worried, dont plan on launching the car anytime soon, just wanted to see if it was common and if there was any simple solution. I will probably just leave them be and enjoy the low ride. Now I just need some larger wheels, im suffering from the small wheel syndrom (14's).
  14. 6

    620's coming unseated

    Shocks are on the car, when the car is jacked up the UCA will fall to the limit and that is when the shock comes unseated at the top of the shocktower. Before making the cut on the springs I did drive around some but not hundreds of miles, I would think with the technology used in making the...
  15. 6

    620's coming unseated

    I know I read of this condition in a past thread I just cant find it now. I recently installed some 620 springs and they raised the front end up way to high. After removing the springs cutting a 1/4 of the coil at a time I finally had the right stance, total of 1/2 coil cut?? Now when I raise...
  16. 6

    C4 leaks... inevitable?

    My C4 leaks from the pan also. Tried different gaskets a couple of times but nothing seems to help. I have been thinnking of getting an aftermarket pan like some mentioned above. My car leaks bad and pretty much changes the fluid by itself over time.
  17. 6

    Coil spring compressor

    The 620's did slide in after cutting about a 1/3 to 1/2 of the coil off but now the spring comes unseated when I jack the front end of the car up. Is there any way to keep the springs seated or will I just have to reset the springs every time the front end comes up?
  18. 6

    Coil Spring Insulators

    Are coil spring insulators necessary when installing new 620 springs? If they are is there any trick to getting them in? Should you have the insulators on the springs then install them or should you put the insulators on the tabs first?
  19. 6

    Buying 17 inch tires need Advice

    Hey MCODE, you need to check out the link below. I have been talking with this guy and he has prices that cant be beat. Check it out. http://fastlanespeedandrodshop.com/html/american_racing.html
  20. 6

    Coil spring compressor

    Hey fasttback you got any pics of your car after you cut the coils that much?
Top Bottom
Back
Forums
Menu