Search results

  1. CBZGT50

    Need help finding something.......real bad

    I need to find one LH wheel in ANY condition. If someone out there has one, Please let me know. This is real OEM I am looking for not aftermarket I have a 93 Cobra, not a Mustang trying to look like a Cobra. Chris
  2. CBZGT50

    Finding something........... Near impossible, I need help!

    I need to find one LH wheel in ANY condition. If someone out there has one, Please let me know. This is real OEM I am looking for not aftermarket I have a 93 Cobra, not a Mustang trying to look like a Cobra. Chris
  3. CBZGT50

    Headlights, Where is waldo (the fuse)

    Hissin 50, I think you said everything right. Sounds like you have some experience with foxes and the switches. This is my first v8 fox and my 6th Mustang. I was considering the switch but I did not know that there is a hidden agenda with the switch. If I put on the flash-to-pass the...
  4. CBZGT50

    Headlights, Where is waldo (the fuse)

    I have a 93 Cobra and I cannot find the fuse for the headlights. My headlights (only the headlights) are going on and off like a fuse is not contacting. I can turn on my brights, but the headlight low beams will flicker when on brights. Then a few minutes later, the lights will work fine...
  5. CBZGT50

    Bas Miss at WOT

    I have the exact same miss problem at about 5000 rpm. I will be running it up and at 5K it just falls on its face at WOT. I took the TB off and cleaned it and it worked good for a while. I was able to get up to 6200K. Now it is crapping again, I cant get abouve 5100K and now I am looking at...
  6. CBZGT50

    Im rich...(running :-/)

    I have learned that cleaning the throttle body will help a lot. I always clean the carbon off my TB if the car has over 50K. I have done this MULTIPLE times and there is much more bottom end and less restriction. You would be surprised what's behind that butterfly valve. Just an idea.
  7. CBZGT50

    Bassani dealers

    Can anyone give me some basanni exhaust dealers. I like the exhaust so much on my 95 Cobra I need to find where I can find cat back systems to fit my 93 Cobra. Any help? PS Tried google!
  8. CBZGT50

    Is there anyone using the VSS 400K Ford security system

    I am re-installing the ford alarm that some jack azz installed with electrical tape. I really need the instructions. If anybody has them, please let me know. CB
  9. CBZGT50

    difference in catback exhaust length between fox and SN-95

    Anybody have any idea on the difference in the exhaust on a 93 and a 95 Mustang Cobra? I have a set of Mac catbacks that had a bent rear pipe in an accident and they gave me a new Bassani system. Now I have the mac mufflers and flow tubes sitting on the floor and I thought about cutting the...
  10. CBZGT50

    Backfiring/Hesitation/Powerloss

    Every car I have owned that was fuel injected would eventually run kinda "puttery" after about 50K miles. I learned that removine the the throttle body, TB gasket and sometimes the upper intake will help. What needs to be done is to have the back side of the TB sprayed with brake cleaner or...
  11. CBZGT50

    Posi or Locker?

    Funny, I was just thinking this question for my rear end. I am going to go with an Eaton 31 spline, 3.73's and Moser 1/2' stud axles. I am going to add on a set of weld draglights and a set of adjustable upper and lower control arms. I'll finish off with some 70/30 springs. I have a 93...
  12. CBZGT50

    Gear and rear set ups. Where to buy good stuff

    I am looking into replacing my rear end with a locker and installing a set of 3.73's. I need to know, FROM EXPERIENCE, what locker and axles are great for a daily driver keeping the budget under $800: So far I am looking at an eaton posi: 399 (31 spline), 5 lug 31 spline rear axles...
  13. CBZGT50

    28 or 31 Spline

    I called randy's ring and pinion to upgrade my car to 31 spline with a locker during my change to 3.73's. Here is the breakout: Eason posi: $399.00 Two 31 spl axels $121 each axle seals and bearings...
  14. CBZGT50

    power windows not working

    Remove the door panel and window and see if the track still goes up/down. Look at the tracks and see if you can see any bent track. If not, and you checked the switch, you might as well replace the regulator. I have replaced two regulators and one window motor. Boy are they fun!!!!! BTW...
  15. CBZGT50

    FPR and fuel pressure Where on a FOX body

    Thanks, I am just getting used to the foxes as this is my first. I have had quite a few SN-95's. Thanks. What would be a good FPR to add on a fairly stock motor but may eventually get some aluminum heads and a SC? Are Aeromotive AFPR's overrated or great equipment and worth the money?
  16. CBZGT50

    FPR and fuel pressure Where on a FOX body

    I would have to look again but I don't remember seeing the schrader valve on the rail like the 94/95's I have an FPG on my 95 Cobra but need to know where I can either put a FPR and a FPG for my fuel.
  17. CBZGT50

    Help! Need 1993 Cobra info/documentation

    I thought I had found a killer deal when I bought a totally stock, Teal 93 Cobra for 9K. It has perfect paint, Perfect interior and not has just a few bolt ons so far (shifter, gauges and tunes). I plan to put some Exhaust on it soon. I am definatly putting 3.73's in it soon. I have a black...
  18. CBZGT50

    FPR and fuel pressure Where on a FOX body

    I am new to fox bodies and the 93 Cobra. I have had SN 95's for years. My question is, what type of fpr (Fuel Pressure Regulator) and where can I can a consistant fuel pressure running off the stock pump? Right now the motor falls on it's face at 5100 rpm and will just act as if the...
  19. CBZGT50

    Why are you Mustang and Cobra buyers so CHEAP.

    1. Not a fox body 2. 63000 mile on the clock 3. I won't say cause it's rude 4. Respect your fellow stanger. 5. Stay in Canada.
  20. CBZGT50

    Why are you Mustang and Cobra buyers so CHEAP.

    I see some moderator deleted my add too for the Cobra. Thanks Guys! :lock:
Top Bottom
Back
Forums
Menu