Search results

  1. Shakin66

    Rubbing doesn't really do this justice

    I had to go with 225's because the 245s just wouldnt work. I was shocked at how far out the 245's propruded. I hope you can get it to work but w/out power steering these 225 are hard enuf.
  2. Shakin66

    Magnaflow Question

    Heres the 2.5 X pipe on my 66' along with a pic of the pocket where the muffs should sit. Its a low kit but thats partly to do with my headers hanging down so far.
  3. Shakin66

    Cut openings in front Valance for coolers

    When I was in my 20's I drilled some holes in my R-model valance and fiberglassed in some 3" pvc tused to hold some driving lights. I am unhappy with the look now but took the lights out and plan to add a intercooler to the center this coming winter and may somehow incorperate them in that design.
  4. Shakin66

    Can someone tell me which fuse is igntion hot on original fuse box?

    This may not apply for your application but its worth mentioning that the post is great for acc. but not if yours needs power while your key is in the "start" possition.....That is experience talking.
  5. Shakin66

    1966 T5 Vibration Issue

    While I have a T56 I am a bit confussed as to what angle your engine is at? It needs 3 degrees or close to it. I set mine up this way and have had no vibration issues so I would make certain you are very close to that.
  6. Shakin66

    my hyd. clutch install

    I have not experienced the same issues with a hard pedal but have to agree its more likely an issue of leverage.
  7. Shakin66

    looking for a how-to on enlarging the tranny tunnel

    I bought the replacement tunnel from Darkhorse and used it as a template to mark the tunnel and then cut it out....If you have factory A/C you will loose it at least until one of us T-56 users starts hacking on their a/c unit and dash to raise it up....I may do that this sumer...
  8. Shakin66

    Some pics of interior items +

    That looks great. I did something like that in my trunk but choose to hide the amps and 12's. You have me thinking I should have displayed them but some of my amps are old school Fosgate stuff and not the prettiest in the world like yours. KEEP IT UP!
  9. Shakin66

    PVC valve ideas please...

    I will have to check but I think that I gutted the inside of it. I will check that out tonight and try to get back to you. It was said that you can vent the breathers but you may have smoke under the hood if you go that route...:nono:
  10. Shakin66

    edelbrock heads??

    Dart makes a great head for us small block guys. After a lot of research I bought a set and have been very happy.
  11. Shakin66

    5000.00 To spend....Ideas?

    Oh, I get it now. I have had a trip planned for years and years and after I get the bodywork done I am going to take the car from here to Fernandina beach (Florida's most northern beach). And get on A1A which follows the coast and drive it down to West Palm. I want to do it this summer and pull...
  12. Shakin66

    5000.00 To spend....Ideas?

    All I can say is he owns the biggest house in town and screws everyone he can to stay in it....I am not the only person with negative things to say about him, just the most vocal.... Anyway what about yalls wish lists?
  13. Shakin66

    Procomp Electronics HEI Ford Distributor

    I bought one myself and was not happy with its quality at all.
  14. Shakin66

    5000.00 To spend....Ideas?

    I do not have any type of subframe connectors installed yet as my T-56 cross member is going to make the ones I have a pain to install. I have the weld in units now but want to look further into the newer ones that tie both sides together. I dont get the sticker comment??? Are you referring to...
  15. Shakin66

    5000.00 To spend....Ideas?

    I am trying to decide exactly where to spend this money especially since I dont know what the paint & Body will cost until latter this week....Hmm, I may not have anything left.:eek: Anyway,I was watching TV and on O.C.C. they showed an AMG Mercedes that was flat Silver and I wanted opinions...
  16. Shakin66

    Interior mounting locations for MSD box

    I installed my Digital 7 and MAP sensor directly under the ash tray on a thick sheet of plexiglas pop riveted into place. That way I can see the wires even whens its mounted. I dont know about fittment on a 67 but your box is smaller than mine so theres an idea to consider. I couldnt get any...
  17. Shakin66

    Should I remove my clutch pedal spring?

    I have a Mcleod hyd. bearing and its definatly enough to raise the pedal. This is one of my favorite mods because my clutch pedal feels better than my mini coopers. A note of caution though, set it up correctly and seek help if needed as it can extend too far and then have to be resealed and...
  18. Shakin66

    c4 vs aod

    I always say when you can upgrade do it so i'd lean toward the AOD. 15 years ago I rebuilt my C-4 and was shocked at how easy it was and was not quite the mechanic I am today.
  19. Shakin66

    rear leaf springs

    It has been 3 years and my memory isnt that great but I think I used 4.5 leafs and was actually thinking to myself yesterday how much better the car handles. I have had 620#s and the 1" sway bar on the car for years but before the rear spring change the rear wouldnt stay planted like it does...
  20. Shakin66

    347 start comming soon!!!

    I remember the first time I started mine and the sense of pride that I had. knowing I had touched every part and tightened every bolt. I have a lifted Diesel Excursion that is my daily driver but as I walked out of the garage I noticed that it had not remote started. As I suspected the...
Top Bottom
Back
Forums
Menu