Search results

  1. T

    How Important is draining the oil onlevel surface in fox body?

    you'll never get it all out just change it more often or run a quart though it after you drain it for a little flush action. If it leaks like my first one did "85 stang" you just keep adding new oil its always clean lol.
  2. T

    Brand New Clutch Slipping

    somthins up wit it. i here ya it should hold but once they start slippin it only gets worse. I dont know about the king cobra clutch but if ya change it upgrade Tony.
  3. T

    what will fit on the 351 from 302

    sweet this is gonna be a summer car and its always in the garage. i did not know to balance the flywheel and harmonic im gonna look into that the stuff iv' got is from my friends dad that he used it and blew a hole in his block so i got his forged steel crank and 6 H beam rods and 6 forged...
  4. T

    what will fit on the 351 from 302

    what i was tryin to say in the first post was i have crank for my new block and rods and pistons and the heads. my 5.0 is all stock
  5. T

    what will fit on the 351 from 302

    it should be easy its the same block hell ya solid mounts. I'm not sure what year the block is from but i will find out when it comes to that.. My heads are for 351 there ford motor sport. I was thinkin about dumpin the efi and changin fuel pumps and puttin a carb on it with a big intake the...
  6. T

    Brand New Clutch Slipping

    it comes down to its slippin so if it were mine i would pull it and look at it. Your flywheel is prob blue from slippin you can have it cut and put a new clutch in it. or at least look at it. Its easy to do take the exhaust down. 4 bolt hold the trans on. pull the drive shaft 4 more...
  7. T

    what will fit on the 351 from 302

    what can i reuse on a 351 windsor with a 9.5 deck hieght I have ford motor sport heads and a new forged crank h beam rods and forged pistons the block is being bored .030 over now and i will be stroking it to 408 cu" What can i reuse on this block from my 302 I would like to use as much...
  8. T

    Auto guys...suggestions?

    go to a stick this is a toy your supose to drive your self it seems like nobody wants to drive anymore. you really want to do somethin nobody els is doin shift it yourself then when you beat em after the race race you can say. yeh and i acually drive my car too and still beat ya anyone can...
  9. T

    Brand New Clutch Slipping

    stock clutch just may not be holding. Ive had a few of these cars and i just picked up a 93 lx the only thing done to it is the intake and exhaust and pullys. my clutch was slipping when i would get on it you could smell it burning i thought it was old and worn out so i picked up a center...
  10. T

    ARGHHHH... My bellhousing's Cracked!

    when you break somthing upgrage it. Get a steel bellhousing for that year mustang it will never give you a problem again its heavy duty and if you ever break the cast irion fly wheel you have it wont damage the car or your leg. its what i use. go on the Jegs web site look it up JEGS High...
  11. T

    Brand New Clutch Slipping

    i dont know but if your motor leaks oil it could be gettin on the disk from the air blowing under the car on the highway. not really sure i replaced mine with a centerforce it never slips. If you made and profomance mod to the car the stock clutch stinks and cant hold up or if you left it...
  12. T

    351 windsor deck height

    whats the deck hieght of a stock 351 windsor motor im looking for a 9.500 deck and 3.00 mains to fit a forged steel stroker crank i"ve got Tony
  13. T

    Post Custom Interior Pics

    yeh dont pain anything plastic that is wrong it always looks bad you can always tell it was painted.
  14. T

    Why did this melt?

    Are you runnin a big amp for subs in that thing cause that does it tony
  15. T

    What nitrous set up to use

    not simmple ti install thats not the problem is the system gonna blow a head gasket and screw things up or can it handle it
  16. T

    What nitrous set up to use

    I got 93 lx with a mostly stock motor cobra intake and 4.10 gear and a B-cam I have been thinkin about installing a mild nos set for fun on this thing. I found a kit for a stock motor in Jegs its an entry level dry system for $555.00 the part number is 741-05115 5.0 stage-1, 75-100hp It say...
  17. T

    WHO MAKES A GOODD THROW OUT BEARING??

    ceterforce centerforce centerforce dont buy junk from auto zone order from jegs next day shipping i just got one 46 bucks Tony
  18. T

    4.11 gears

    You'll be fine gonna have to go a little slower and your gonna be runnin at least 3000 rpm the whole way you wont burn nothin up there made to run Its gonna cost a mint in gas you may even have to speed up and then pull it out of gear to give the motor a break every now and then thats what i...
  19. T

    thinking about changing plates

    I like too late u lose thats awsome keep it or you'll see someone else with it
  20. T

    Lookin at adding subframe connectors.

    You can bolt em on and weld em there is no reason that shouldn't work save money bolting them on yourself and then go to the muffler shop and ask to weld where you want Tony
Top Bottom
Back
Forums
Menu