Search results

  1. 4G-KDMP

    Body Molding questions

    Depending on how curled the ends are if the moulding is salvageable or not. After you've remove the molding try applying some light heat to the ends to see if they'll lay down flat or not. If it lays flat you're good to go if it doesn't lay flat you probably need new ones because the new...
  2. 4G-KDMP

    Quad Shock Mount Bolt size???

    That bolt is 12mm x 1.75 x 70mm
  3. 4G-KDMP

    Where do these lines go?

    You're welcome glad I could help.
  4. 4G-KDMP

    motor mount nut size? 90 gt

    What was the size and thread pitch for future reference if you don't mind?
  5. 4G-KDMP

    Welding casters to K-member to transport for paint?

    Why not put 4 junk tires on it and not worry?
  6. 4G-KDMP

    Salt/Pepper Shaker Recall 91E19 (10 pin wiring harness) causing check engine light?

    Reasons For Recall The "Check Engine" warning light may be activated because of intermittent contact at the wiring harness (12A581 to 9D930) interconnect assemblies. This may result in unnecessary EVP sensor and EGR valve replacements. ^^^Look at what Almost Stock posted ...
  7. 4G-KDMP

    spring codes

    Ford B Springs M-5300-B MOF E5SC-5310-KA (front) E5SC-5560-AA (rear)
  8. 4G-KDMP

    Torque spec on front rotor/ bearing nut?

    Ford Shop Manual says.... 5. While rotating the wheel, hub- and rotor assembly in a counterclockwise direction, tighten the adjusting nut to 17 - 25 ft-lb to seat the bearings. 6. Loosen the adjusting nut one-half turn, and then retighten Ford spec is for the final tightening is closer...
  9. 4G-KDMP

    tail light weatherstrip rubber?

    I thought this was the answer to your question:shrug:
  10. 4G-KDMP

    Measurments

    I'd contact Rick 91 GT who post here quite often. http://www.stangnet.com/mustang-forums/members/rick-91gt/
  11. 4G-KDMP

    RIM PROBLEMS

    This should give you a good idea of the price and what you need. 1979-04 Mustang Steering Rack Limiter 6-Pack by Ford at LRS - Same Day Shipping!
  12. 4G-KDMP

    t-tops leaks

    This might help? T-Roof Waterleak Repair Manual
  13. 4G-KDMP

    lame battery cable question

    Never mind.
  14. 4G-KDMP

    1988 convertible drivers seat question

    You may want to take a look at his before you buy another seat. It's for a leaning seat but your seat pan could be broken and the reason it's leaning backward ? 1986 Mustang GT Build and How To's
  15. 4G-KDMP

    Painting upper intake and valve covers...

    Why would use High Temp paint for upper intake or valve covers since neither ever reach 550F VHT Aerosol High-Temp-Coatings and VHT Aerosol Wheel-Paint
  16. 4G-KDMP

    Installing timing pointer ??

    If it's the stock pointer .. it just bolts up.
  17. 4G-KDMP

    just bought a 87-79 tilt column...can you remove the button to get the key out?

    Here you go.... Ford Steering Column Fix - Mustang Central Forums
  18. 4G-KDMP

    part number for bearing retainer?

    Do a goggle search for Ford part number M-7050-A you might find something locally.
  19. 4G-KDMP

    part number for bearing retainer?

    Are you talking about this? 1983-93 Mustang 5.0L T-5 Bearing Retainer by Ford Racing at LRS - Same Day Shipping!
  20. 4G-KDMP

    Heater core hose restrictor

    blk93svo you have a PM.
Top Bottom
Back
Forums
Menu