Search results

  1. ddonaca351

    Using E85 as Injector Cleaner

    Just fyi, if you run e85 in a car jetted or tuned to run gasoline (e10) the car will run lean (stoich for Alcky is about 2x that of gasoline). Go easy while the e85 is in the car, or ease off on the timing.
  2. ddonaca351

    sn95 brakes on 70?

    Sorry fellas, been away from the hobby for awhile... Anybody ever come up with a hub so we can use sn95 cobra rotors/calipers on 70 disc spindles? (no I don't want to buy drum spindles, thank you) Thanks in adv,
  3. ddonaca351

    351C intake under the shaker on a 70 mach 1

    This should help... http://www.panteraplace.com/Pantera%20Pics/dans%20intake%20113.JPG edelbrock on the left, blue thunder on the right. *about 1" higher... do-able, but it'll be close.
  4. ddonaca351

    Couple questions.

    pssstt... flat aluminum sheet in the dash and a set of autometers works well. like this (only for alott less than $700...) Florida 5.0 - 1987 - 1993 Instrument Clusters
  5. ddonaca351

    correct offest/rims for 5 lug swap with sn95 axles

    Well since some seem unclear on this, I'll add in: Backspace is measured from the inside edge of the rim (part closest to the center of the vehicle) to the back side of the mounting surface (where the studs come through the wheel) Offset is measured from the centerline of the rim to the...
  6. ddonaca351

    TW heads and removing roller lifters?

    On a 351 the deck is tall enough you wont have to, but on the 302 yes you usually do. (need to pull the head)
  7. ddonaca351

    local ford dealership/tramission problems

    There is a shop in Vancouver just off st johns and 65th that can do warranty work... (or at least they could a while ago) check my sig for a link.
  8. ddonaca351

    FE_NUT puts down 1360hp @ 25psi

    Fear the duck. that is all....
  9. ddonaca351

    I think were making some torque?!?!

    Just drill the axle for all 10 studs when you get the draglites. Problem solved. :D
  10. ddonaca351

    t-56 swap in fox

    Call Jeff or Jeff at All Ford Performance in Vancouver, they would know... (link in the sig) Dave
  11. ddonaca351

    Anybody like trials?

    Cool vid, if it's a repost *blowme*, if not enjoy... http://www.photobysergio.fr/bou-raga-toulouse.html DD
  12. ddonaca351

    Boooooost!

    Another good thing about running the DFI (and I think the AEM can too) is you can run the other injector impedance so you get lotts of fuel cap (like up to 80 or 100lbs/hr) but still have good idle quality. The ford computer cant do that, even with a piggy back. Just something to think...
  13. ddonaca351

    My best time at pir tonight....!!!

    She wanted to make sure the last light matched the car.... :p DD :flag:
  14. ddonaca351

    Anyone with a street bike?

    Hey J' ... whaaaazzzzzz uuupppppp Duc is a good scooter, they are a little more spendy though. The ones they make with a trellis frame are sweet looking. Gonna paint it like a 51? :D Dave :flag: :nice:
  15. ddonaca351

    No mo' expy!!! Welcome my new ride...

    Looks good Mish' I like how the ol' man had to do the work, while you were supervising. :D On the rub, you could probably just go 10-15mm narrower in the front. They look like they roll out away from the rim pretty good, if they were just a little narrower, you'd probably be fine. DD...
  16. ddonaca351

    Cleaned up the stang and took some pics.

    (forest gump voice) mmmmmmmm, perrrddaayyyyyyy. :nice: Other than the badge, its got sleeper potential. DD :flag:
  17. ddonaca351

    Anyone with a street bike?

    Oh, on the crashing tip.... Ive been down 4 times over the years (been street riding 20+ years) and the worst I have ever been hurt was 3 cracked ribs and some minor elbow rash. The first 3 times I walked away without a scratch at speeds up to 80, because I was wearing full gear. The...
  18. ddonaca351

    Anyone with a street bike?

    Ive got an 05 zx12. (imho) The 650 would be a great starter bike. They're also comfortable, and inexpensive. They are *fairly* popular as track day bikes too, so there are lotts of aftermarket/replacement parts available. Another option, if you wanted to go a little more sporty, would be...
  19. ddonaca351

    StangNet Administration and Mods

    Well I would voice my thoughts, but then the thread would be locked, or I would be banned. DD :nono: :mad: :bang: :uzi:
  20. ddonaca351

    AFP makes video of the week

    somebody was taking a nap..... :D DD
Top Bottom
Back
Forums
Menu