Search results

  1. 1

    Relocating battery to the trunk

    How involved is it? Is there a special kit I have to buy? What are the benefits of relocating the battery to the trunk? Will I feel a difference?
  2. 1

    Blow Off Valve?

    I sense much rice in you... :rlaugh:
  3. 1

    Should I get new bolts???

    Going to be installing a new clutch/trans in a few weeks... Should I get new flywheel bolts? ARP sells them... Also, should I get new pressure plate bolts and dowel pins? Or should I just re-use all the stock bolts? Will they be okay?
  4. 1

    What intake??

    :stupid: Before my H/I/C swap I had an explorer intake. I got it for $200 off the corral. At the time I was very happy with it. I felt a very noticable SOTP increase when ran with stock heads/cam. I ended up selling it because I wanted the Performer intake for the looks and to match my...
  5. 1

    What intake??

    I like my edelbrock performer intake. Very easy to install and flows great. I do have heads/cam as well, but I have heard the performer is the way to go with stock heads. Either that or a cobra intake. The street heat would work well too, but some say its a bit overkill for stock heads.
  6. 1

    TKO crossmember, where to buy?

    I went ahead and bought a new FMS adjustable x-member from Mustangs Unlimited. Summit also sells them. It was only $69.
  7. 1

    Have the TKO, bell housing, and driveshaft yoke... What else is needed?

    Is this the mount I need? http://cgi.ebay.com/ebaymotors/ENERGY-SUSPENSION-TRANSMISSION-MOUNT-80-95-5-0-MUSTANG_W0QQcmdZViewItemQQcategoryZ46104QQitemZ7993801740QQrdZ1QQsspagenameZWDVW I heard I need an "off set" trans mount for the TKO. Is this mount the same one you have and did it work...
  8. 1

    Have the TKO, bell housing, and driveshaft yoke... What else is needed?

    I'm buying a new bullit steel flywheel from Spec. Is a trans jack really needed? Could I use a regular jack with a block of wood instead?
  9. 1

    Have the TKO, bell housing, and driveshaft yoke... What else is needed?

    I'm doing my TKO swap soon and want to make sure I have ALL THE PARTS I need so that I'll be all set when doing the swap. So far I have a TKO-500, aluminum bell housing, and driveshaft yoke. I know I'll need to modify the x-member, but I may just buy a new FMS adjustable one. Is there...
  10. 1

    Help with choosing flywheel

    Thanks guys. I think I'll be going with a Spec bullit steel 50oz flywheel.
  11. 1

    Help with choosing flywheel

    I just ordered a TKO-500 w/26-spline input shaft. I'm also going to be running a Spec stg 2 clutch, so I want to get a new flywheel rather than just re-surfacing the stocker. My question is, which flywheel should I get? Which brand? Steel or aluminum? 28oz or 50oz balance??? What is the...
  12. 1

    C&L Mass Air Compared to Pro-M

    I had a C&L 73mm with 19lb injectors on my old stang with no problems. I now have a C&L 76mm/pipe with 24lb injectors and have no problems at all. I'm very happy with it.
  13. 1

    Astro Performance G-Force T-5

    One more question... What about a Centerforce DF clutch? Would it work well with a G-Force T-5?
  14. 1

    Astro Performance G-Force T-5

    I was originally planning on getting a TKO 500, but this G-Force thing is really growing on me. I have a heavy convertible and want to save as much weight as possible. If I get a TKO I will add 30-40lbs to my car and loose some power to the ground, as the TKO eats up more power than the T-5...
  15. 1

    Astro Performance G-Force T-5

    Where did you order your G-Force and how much was the total cost? Also, G-Force themselves sells both a G-Force using a new core and used core. The price difference is about $400 ($2000 for new, $1600 for new). What would be the advantage of getting a G-Force that has a new T-5 core? Astro...
  16. 1

    Almost done with timing cover and stuff, got some questions.

    When I did my cam swap none of my bolts snapped. Lucky I guess. I didn't use any anti-seize on the timing cover/water pump bolts. I used red loc-tite on the cam sprocket bolt and that is all. If you can see some shavings in the pan, try and remove them with a small spoon or something like...
  17. 1

    Astro Performance G-Force T-5

    Anyone have any experience with them? I was originally planning on a TKO 500, but the G-Force just won't get out of my mind. I was referred to Astro Performance, but am still wondering where the best place to buy one is. Would it be better to just order one directly from G-Force? Also, I...
  18. 1

    Spec clutch... Stage 1, 2, or 3?

    I think I'll be going with the stage 2. I hope I have no regrets.
  19. 1

    heater core replacement?

    Check out my buddy's how-to article that he made when he did his heater core swap. Hope this helps: http://www.dork.com/hiflow50/heatercore_replacement.html
  20. 1

    Spec clutch... Stage 1, 2, or 3?

    Would a Spec stage 2 hit too hard for a TKO500?
Top Bottom
Back
Forums
Menu