Search results

  1. Emay

    Beware of Modular Depot

    01blowngt and Jimfitzgerald, we understand the story here from both sides. Please remain civil and on topic with facts. Don't let this become personal. I'll stay close to this to make sure we don't side track like the posts on modular and corral's forums. Be aware I'm not siding with anyone...
  2. Emay

    Tensioner pulley dieing! Have some questions...

    At least your gettin an education out of me..
  3. Emay

    Tensioner pulley dieing! Have some questions...

    I use a half inch breaker bar, insert it in the square hole and release the tension. Very simple task, no special tool required. Well, unless you don't own a half inch break bar.
  4. Emay

    wheel/tire that wont let me spin like this:

    belz, your not only going to have clearance issues with the calipers coming down to a 15" wheel, when you shrink the diameter, you also close the tolerances for the shock mount and lower control arm point. Only thing you can do is test fit the wheel, hopefully you can find someone local that has...
  5. Emay

    Rear Emblem Mounting

    Can of paint, I have a gloss black one I did with a spray gun, but I liked the flat black can painted one better.
  6. Emay

    Rear Emblem Mounting

    Sorry, red scuff pad, looks like scotch bright green pads, but they are red. I slipped some 20 lb fishing line behind it and loosened one side just enough to be able to get the tip of my finger behind it, just worked around it with light pressure around the outside edge, by the time I made...
  7. Emay

    Rear Emblem Mounting

    I pulled mine off, taped off the GT center, scuffed it with ed scotch pad, primered and went flat black. A lighter one:
  8. Emay

    Push-button start from Ninosport

    Another place mustangs unlimited with a bit more description: http://www.mustangsunlimited.com/itemdy00.asp?T1=M11572GT+01
  9. Emay

    Push-button start from Ninosport

    Here's one at MRT that is a little more plug and play: http://mrt-direct.com/concept/appearance/2005+/interior.php
  10. Emay

    Push-button start from Ninosport

    Install instructions I linked to off the v6 portion of our home here - stangnet.. http://home.comcast.net/~mustangtony/starterbutton.htm
  11. Emay

    KB 2.6, 2005 GT throwing belts, HELP!!!!!!

    The tensioner was originally developed by thumprrr because he was breaking/bending the actual tensioner repeatedly. Just losing the belt was not the original reason for development. The tension failed and then the belt carnage would occur. Make sure that your belt is free and clear of all...
  12. Emay

    Which clutch for a supercharged 06?

    Another thing to consider is that an aluminum flywheel is great for freeing up rotational weight in the driveline, but sometimes at a cost of giving off a little chatter when doing normal relaxed street driving. Not sure that's a topic of concern for you. As for the listing of centerforce...
  13. Emay

    Gas cap ????????

    I've siphoned in order to be in compliance with the fire code for an indoor car show. While it wasn't easy to get the hose I used into the tank, I did get it in there and removed about 6 gallons worth of fuel. Took quite some time and it was a pain, but it can be done. Car would need to be...
  14. Emay

    Problems at the pumps

    Exactly and this needs to be clear amongst the auto enthusiast. The difference means a lot to the pocket book.
  15. Emay

    Which clutch for a supercharged 06?

    Your pops is probably thinking that stock is best for the feel. I'll tell you outright, things ain't like they used to be. Numerous high performance clutches are available that give that similar stock pedal feel. Make sure he knows that. For just under your quote you can get a new clutch and...
  16. Emay

    Problems at the pumps

    It is a common problem, and there are numerous posts about it here. The split tank and venting our cars have cause the pump to quit early, not on all, just on some. However, you can slow down the flow and likely get the tank full without incident.
  17. Emay

    Wheel and Tire sizes...

    Daren, I'm running 20x8.5 up front and 20x10 rear. No reason to be timid about the rear, the space we have out back in the S197 platform is far different than years past. You can comfortably run big wheels and most big rubber 305-315. I know your not looking for a 20, but here's some 20x10...
  18. Emay

    Wheel spacers

    As long as your using a hub centric spacer (which almost all maximum motorsports product is), you will be fine. Those self align and are very safe. Numerous 03-04 cobra cars run them as the wheel spacing and widths are sporadic from line to line adding the adapter allows more variety in offsets...
  19. Emay

    Cervinis Side Exhaust & Lowering Springs

    Glenn you can do anything you want for money. I'm no welder, a trade I'd love to have, but you don't want me practicing on this project. All of the subframes use the same rear mounting area which is where the exhaust obviously passes under the pinch weld to exit the side of the car. As you...
  20. Emay

    Sell or not

    For the amount of love you have for the car and the money already invested, I'd have to say make the auto change. It can be done very reasonably. I just don't think your going to find the right enthusiast to pay up and not cry when the car leaves your hands. That said, auto's can be made fun...
Top Bottom
Back
Forums
Menu