Search results

  1. 8

    Which Squirters

    Your right it was needlessly rude, glad you said something i'll so much nicer to ppl. now :rolleyes:. Obviously you do care if it was meant in a rude manner or not, if it didn't bother you, you wouldn't have said nothing about it. Oh an to answer the question about squirter's, 19lb will do...
  2. 8

    5.0 Resto... Reliable?

    Yeah they are a good company, i order'd a shifter boot for my car only place i could find one other then ford an i didn't even ask ford god only know's how much they wanted for the cheap looking leather thing. 5.0resto theirs was expensive, BUT it wasn't that cheap leather looking stuff either...
  3. 8

    Which Squirters

    Exactly
  4. 8

    Which Squirters

    Possibly so i find myself at other forums alot more then this one anymore. But that's not from the forum format :nonono:
  5. 8

    Which Squirters

    Yeah the ppl. that actually know anything on here anymore don't post that often ......
  6. 8

    Guys with dry nitrous kits...

    If you do everything that was said, your motor won't have no problems mine lived for 3 years with 100shot an it wasn't always tuned right either lol. When it did blow though wasn't from the nitrous just weak main caps.
  7. 8

    90/10 vs 70/30 drag struts

    near the top of this page it tells you the usage of each strut an shock. I think you might had got the wrong ones if it's only an occasional racer. http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=966&prmenbr=361
  8. 8

    Edelbrock Perfromer RPM heads/ About how much will I gain?

    Also just to add, from the MM&FF head shootout they had. The RPM heads with the 2.02 intake valves flowed more then the 165s did. But if your talking about getting the RPM's with 1.90 valves then it'll be about the same, the RPMs with the 1.90 intake valves are exactly like the performer heads...
  9. 8

    Edelbrock Perfromer RPM heads/ About how much will I gain?

    AFR's are great, but if you can get a deal on some edelbrocks then go for it. The HP difference between the two from what i've heard is pretty unnoticable for your average street car. There was alot of discussion over on the corral about this and from what i read ppl. with edelbrocks where...
  10. 8

    Guys with dry nitrous kits...

    First you don't have to have an ignition it'll help you run a higher timing though. The best way to set the stock timing is for every 50shot in nitrous you retard the timing 1 to 2degrees. The gapping looks fine what you have also with an ignition of some kinda it'll allow you to run a bigger...
  11. 8

    Spintech Mufflers

    Car sounds sweet, i bet your neighbors love you :D . I can't hardly start mine up without getting bitched at.
  12. 8

    Which cam = more power

    You shouldn't have P/V clearance problems with the comp. cam, the X-303 you might if your going to have stock style pistons put back in the motor. But you can order pistons to handle the lift too.
  13. 8

    glasspacks

    My super turbos made the car sound almost stock that's with longtubes dr. gas x-pipe an the muffler's were a few years old too. They suck in my book Produmps all the way for a GT :nice: Flowpaths for mustangs with tail pipes
  14. 8

    Some one with Edelbrock heads please help me

    I emailed him about it, he's going to sell me some new springs. Damn motor better make some power it's starting to cost me to much money lol.
  15. 8

    Some one with Edelbrock heads please help me

    Thanks perky, i think i'll do that. :nice:
  16. 8

    Some one with Edelbrock heads please help me

    Thanks guys hopefully that will be enough info for Ed to do my cam. I need the pressures for the heads cause that's one of the questions on the paper i'm filling out for a custom cam. But thanks
  17. 8

    Some one with Edelbrock heads please help me

    You wouldn't happen to know the Valve Spring pressure's would you, i dunno what exactly that is. I know the max. lift on them is .575 but i dunno the pressure.
  18. 8

    Some one with Edelbrock heads please help me

    I figured it out, but i wasn't talkin bout volume i was talking about the size of the port like 1.20x2.10. But thanks I got to looking at the 1250 gaskets they are 1.20 x 2.10 that's why my edel's are my thumpers are a tad smaller like 1.17 x 2.08 which would explain the difference when i...
  19. 8

    Some one with Edelbrock heads please help me

    I'm going to order an FTI cam this friday, an i need to know if my heads have been ported or anything. The reason why i ask this is my thumper heads were ported to a felpro 1250 gasket. I just mic'd these edelbrocks i bought an they are slightly bigger then my thumpers. Does anyone know what...
  20. 8

    wtf is my motor f___ed!!!!!!!!

    if the bolts are all there an tight you need a new balancer. The stock ones are junk aren't made to withstand the rpms we put out on these motors.
View older results
Top Bottom
Back
Forums
Menu