Search results

  1. MSM0075

    ahh duhh, what type of oil?

    351: Yeah thats right, there is a bent style one that fits a FL-1A. I forgot all about that. Merkurs and SVOs had them correct? My motor is from an '87 TC so I have the boxed flat one.
  2. MSM0075

    ahh duhh, what type of oil?

    FL-1A's are too big for me with the oil cooler. I hear oil coolers dont help that much anyway, is this true?
  3. MSM0075

    Sorry its been so long -update-

    a few months ago i was in your same spot. been with her 2 years, she left me out of the blue, everything just went downhill. she was my first long term girl, loved her dearly, best thing i could do is not think about her, and not talk about her. she called me the other night and i picked up, i...
  4. MSM0075

    ahh duhh, what type of oil?

    Motorcraft FL-300. Its for oil cooled motors I belive. Not quite sure.
  5. MSM0075

    ahh duhh, what type of oil?

    I just picked up an FL-300 oil Filter along with this new GTX "Start Up" 10w30. Cars back on the road. seems to be okay. I got boost again :) white smoke wasn't there no more, but i got on it going down the street for the first time and i saw a lil bit, then i got on it again back down the st...
  6. MSM0075

    ahh duhh, what type of oil?

    Call me stuipd, but just curious. What type and weight oil do you guys run in your Turbo 2.3L's? My motor has about 150K on the clock.
  7. MSM0075

    Is $1500 too much?

    If you need a decent body with bearly any rust to drop a turbo motor in I have a '93 Mustang for sale, Cheap.
  8. MSM0075

    How much for a shell?

    Cars still avalable, I'm drivin it around rockin the A/C full blast ;)
  9. MSM0075

    I'M A NOOB HELP ME PLEASE!!!

    2.3T is the way to go, pretty cheap, and EASY.
  10. MSM0075

    N/A boost

    If your going to go through all of that, Just find a complete turbo motor for a couple hundred. Hell I got a complete working '87 TC for 350$
  11. MSM0075

    How much for a shell?

    I'm getting rid of my '93LX. The trans is shot and the motor has about 180K on it. The car has almost NO rust, and its obviouslly not twisted beacuse its a 105HP four banger. I'm going to sell it as a shell beacuse thats pretty much all its worth, Plus I can use the DIS parts off of it and put...
  12. MSM0075

    Rebuild A4LD Install

    I gave up and re-installed the old A4LD. Its fine 1st - 2nd but slips pretty bad from times into 3rd, and does not shift into OD anymore. On installation I did not change filter or modulator. I also reused as much 'old oil' as I could. I tryed to avoid doing a complete fluid change beacuse...
  13. MSM0075

    Rebuild A4LD Install

    Screw this, I'm going T5. I guess I'll start the pedal assembly tomorow since thats all I have so far :( Does anyone want 2 A4LDs? Or trade for a complete T5?
  14. MSM0075

    Another A4LD Question

    The fluid in my A4LD was black when I pulled it today. Time for a T5 Swap, anyone got one in Jersey??
  15. MSM0075

    Rebuild A4LD Install

    This is rediculous, this stuipd shifter leaver is the only thing holding me back from installing this trans, I'd put the trans in but I wouldent be able to reach or mess around with the linkage once its in. I'm just so fed up right now I wanna put the tran's in the trunk and push this car down a...
  16. MSM0075

    Rebuild A4LD Install

    How hard is it to get that shifter mech. out of the trans? It looks impossible beacuse theres no room. there seems to be another bolt on the opposite side of the shaft inside of the trans but theres like no room to grab that. Or am I looking at this all wrong? The connectors looked the same...
  17. MSM0075

    Rebuild A4LD Install

    I'm going to reuse the N/A TC and FP. I got a problem though, The shifter leaver on the TC is differnt than the mustang. the TC's hangs near the pan and the mustang is above along with the kick down leaver...I guess im going to have to rig something up beacuse in order to switch the two it looks...
  18. MSM0075

    Rebuild A4LD Install

    Old transmission is out. Getting ready to take the TC and flexplate off. How do I properlly 'seat' the TC?
  19. MSM0075

    Rebuild A4LD Install

    Started doing the swap today, took the driveshaft off, crossmember, and all but one bolt on the transmission/motor. the one where the trans dip stick is bolted to. The car is a '93 Mustang 2.3 and the Trans came out of an '87 Thunderbird turbocoupe, but It was rebuilt by the prevous owner so...
  20. MSM0075

    New Timming belt and set the Timming.

    I love getting so stumped on something so difficult then finding out how simple it really was ;)
Top Bottom
Back
Forums
Menu