Search results

  1. LiquidGT

    Whats the best and most efficient E-Fan?

    Here's my Mark VIII fan blade in motor in a Tbird shroud... looks the same. I cut the old shroud too much, I was at the JY and this shroud just happened to be in my path; :D I even test fitted it in a Mark. From what I heard the 93-96 motors had 3-wires and the 97-98 had two wires and were a...
  2. LiquidGT

    Whats the best and most efficient E-Fan?

    93-98 Mark VIII; the 97-98 2-wire motor is supposed to be the very best. I'm 99% sure that the 4.6 T-birds and Cougars have the same fan too, so you can broaden your search area. The DCC is a fan controller, if you're not good at wiring then the DCC is the way to go.
  3. LiquidGT

    Which is stiffer? Hatch or Notch?

    The notch has the lightness, but the hatch has the aero.
  4. LiquidGT

    SON OF A BISCUIT!!!

    I believe they only made one FR500, so I guess it would be pricey... or are you talking about the rims?
  5. LiquidGT

    Which is stiffer? Hatch or Notch?

    I read that the notch is stiffer, and I can believe that because it has the package tray frame in the rear that ties L&R sides of the car together. The hatchbacks extra weight probably comes from the huge rear glass, larger 1/4 window glass (on the aero cars), and the fold down seat back stuff...
  6. LiquidGT

    SON OF A BISCUIT!!!

    I was gonna post earlier and say make some offset fenders as joke; if you did that then the front would be similar to the FR500.
  7. LiquidGT

    Anyone looking for a truly unique intake?

    Same here. Now we all know more ****.
  8. LiquidGT

    D&D K member install....steering shaft?

    IDK if this will help you since I dont have that K-member or know anything about it. The part of the steering column that comes out from the firewall is collapsible, you might have pushed it in during your swap. I did a rack swap and this happened to me, I was tapping a piece into the column for...
  9. LiquidGT

    BBK SSI

    I love the symmetrical aspect of its looks, but I'm not too crazy about the "BBK" all over it. The quality issues alone will keep me away from it, and cost wise you can find a better intake that makes the same or more power. Whats dumb to me about it is that it has a symmetrical plenum with a...
  10. LiquidGT

    Whats the best and most efficient E-Fan?

    Yeah I'm using the 3.8 Taurus fan and shroud. I picked mine up for $11 bucks at Speedway Salvage, across from the Gateway track; plenty of Taurus' there. On another note... I swapped a T-bird shroud to a Mark VIII fan blade and motor since I cut mine too low; so the Mark VIII and the later...
  11. LiquidGT

    Took Stang out for a short errand

    I gotta say, you probably have the finest example of a 4cyl Fox anywhere. :) They're either all beat down or have a 5.0 conversion done to them.
  12. LiquidGT

    Guys with explorer upper/lower's i have a ?

    You'll need a drill with a 1/2" chuck for the 9/16" drill bit; or unless they make a 9/16" bit for a 3/8" chuck. :shrug: I did mine myself, a friend already had a 1/2" drill and a 3/8" npt tap, I just supplied the drill bit.
  13. LiquidGT

    Whats the best and most efficient E-Fan?

    Well the Mark VIII and 4.6 T-bird/Cougar Fan is the best, but it may not fit with your s/c setup. The 3.8 Taurus fan it cools great too and you might have better luck getting it in. I have both a Mark VIII fan and a Taurus, I couldnt get the Mark to fit. I thought about modifying the shroud to...
  14. LiquidGT

    Steering Wheel Ideas for the Black Pearl

    Thinking out loud. The first gen Focus has a nice wheel, it has a small, thick, sporty feeling wheel with the 10 and 2 o'clock grips. ...And Mustangs get wheels out of the F150 and Ranger parts bin. :rolleyes:
  15. LiquidGT

    Friken Mr Gasket strikes again

    Yeah they're made in China now. :notnice: I put in a Mr Gasket 195 when I built my engine, "lucky" for me mine ran too cool. It wouldnt go over 160 on the highway, and this was in the winter so I had no heat so I quickly swapped it out for a stocker 195. Now I'm running a 180 Superstat...
  16. LiquidGT

    H-Pipe options

    I got the Magnaflow catted H and I passed my final emissions test with a new h/c/i and no thermactor system. The Magnaflow H might be your best and cheapest option. As far as sound, my h/c/i with cats is only slightly louder than my stock bolt on engine with no cats and a catback. You can...
  17. LiquidGT

    Fox body factory paint overspray

    It just looks like the usual ultra thin coat of Ford chassis paint to me. :shrug:
  18. LiquidGT

    questions about GT40 heads

    I got a whole GT40 Explorer motor for about $450, shipped. I wouldn't pay more than $200 for those heads; maybe $250 because they're ported.
  19. LiquidGT

    1985 Stang GT Front end and center console swap! Help!

    ...and the OP hasn't been back since.
  20. LiquidGT

    82 Mercury Capri

    You can swap almost anything with just bolting it in on these cars, you can even BOLT IN parts from a '04 Mustang. ...You might have a wrestling match with those 27 year old control arm bolts though.
Top Bottom
Back
Forums
Menu