Search results

  1. M

    Megasquirt

    For the cost of the Megasquirt these days, there are plenty of tried, tested, and most importantly warrantied aftermarket ecu's out there for not much more, it's an area you just don't want to go cheap on.
  2. M

    T5 Conversion kit

    You need to broaden your search, ebay isin't the only resource out there... I wouldn't pay more than $50 for the oem pedals, any more and you could just fabricate one from scratch.
  3. M

    SN95 Tech info needed

    Yeah, the ones we have access to ex-Japan are identical to the North american ones, except they have small stuffed toys up on the dash, 1000 yen coins down the seats, and have spent their life running on 100octane :-)
  4. M

    SN95 Tech info needed

    We're getting a 5.0 94-95 GT, I was under the impression from my limited study so far that all SN95's had the post-cat comparitive setup, I'm glad to be wrong in this instance, so this means we can get happy with the grinder when it arrives, bin the cats, leaving the o2's and it will run fine?
  5. M

    SN95 Tech info needed

    Yeah, I double-checked my math, 19lb/hour injectors come up to 199.69cc/min, assuming that the specific gravity was that of water, not any particular density fuel. OT Reply: Thanks, and not only is it a beautiful place to live, we aren't legally required to run Catalytic converters either :-)...
  6. M

    SN95 Tech info needed

    19lb, so in my corner of the world is (Out comes the calculator) 200cc injectors? Doesn't leave much room for expansion, so those will be finding their way into the bin...
  7. M

    SN95 Tech info needed

    ok, I have all but abused the forum search, and nothing have revealed itself to me, so here's what I'm looking for: - Pretty much anything and everything electronic you've got on the SN95, PDf service manuals, spec websites, etc. With 4 weeks until the car arrives, I need to at least have...
  8. M

    raced an 02 v6 and lost!!!??????? HOWWW??

    When I clean things like fuel tanks, I use a old trick taught to me by my welding guy: 1. Drain/Remove tank 2. Mix a cup of dishwashing detergent in with a bucket of petrol and pour 1/4 into the tank 3. Swirl the mixture round the tank for a minute or so 4. Pour out into another container...
  9. M

    reaction times

    Depends on what tree is in use for me, when running DYO with a .4 countdown tree, I average .475 - On a .4 pro tree it goes up to around .500
  10. M

    First 1/4 mile drag strip!

    Even if you run 16's - You'll have a blast, it's the best feeling rolling out there, staging up, running the pass, then reflecting on the fact that while you were racing the hundreds/thousands (depending on how big your venue is :) ) of spectators just didn't exist. It was just you, and your...
View older results
Top Bottom
Back
Forums
Menu