Search results

  1. BlooDReigN

    Mac Prochamber question?

    My 408 has 1 3/4 long tubes in to 3" pro chamber and 3" dumps. You can hear it in the youtube video in my sig further up the page.
  2. BlooDReigN

    How to square up K-member

    Thats how I would suggest to do it as well. It's a good, easy to follow write up.
  3. BlooDReigN

    Mac Prochamber question?

    You could FEEL the couple pounds off your car with the h-pipe??? :rlaugh:
  4. BlooDReigN

    Ok, ready for some more help with my clacking engine..

    Have you made any more progress with the car? If not, you need to start taking more stuff apart to see what the problem is. Your rocker arms look fine. except for one that is sitting down too much. Maybe a bent pushrod or something, or it could just be the picture. It's normal for a few of...
  5. BlooDReigN

    Help me install a cam

    It's pretty simple....take the valve covers off, rocker arms off, push rods off, lifters off, timing cover off, crank pulley and harmonic balancer, rad and fan (you will need this for clearance to alllow the crank to go in straight), timing cover, timing chain, and cam. You should replace...
  6. BlooDReigN

    408w which air intake?

    You don't need a 4" power pipe if you have a 75mm throttle body. All you need is a 3" cold air intake, which even the cheapest cold air intakes are. Don't bother with an expensive cold air intake if all you have is a 75mm throttle body. I went with a 4" CLT intake on my 408...You can see it...
  7. BlooDReigN

    Will a 315/35/17 Nitto D.R. Fit on a 17x9" wheel?

    Of course it will fit, but it won't fit PROPERLY, so you wouldn't get proper traction, handling or tread wear. I have 275/60/15 tires on 15x7 turbine rims. They fit, but it's far from ideal. I got the ET streets for $50 though, so I really don't care if I **** them up :D
  8. BlooDReigN

    what is a good afr for an HCI car?

    Most of you guys are crazy! 13:1 is a great AFR for an N/A motor going WOT. Unless you are getting detonation, going richer will just cause you to lose power.
  9. BlooDReigN

    "Big Stuff 3"

    It's a good system, but most aftermarket EFI systems are way over priced IMO. Look in to Megasquirt. You can have the entire thing for less then $500 by the time you have it installed in your car. You can even set it up so there is no cutting of wires or replacing sensors or anything on a...
  10. BlooDReigN

    June 5.0....315's in the back...anyone see that?

    I have 275/60/15's on Turbine rims. It's far from optimal, but it works. Please post all wheel/tire specs for the 315 wide tires in the back please. I don't have quad shocks or tail pipes, so that gives me a little extra clearance.
  11. BlooDReigN

    June 5.0....315's in the back...anyone see that?

    Can somebody please scan/post the article or let me know how exactly they did this?? I would really like to do this on my fox. I need more traction on the street!!
  12. BlooDReigN

    Ok, ready for some more help with my clacking engine..

    Did you turn the engine over by hand yet to check if any of the rockers are loose? You could have a loose rocker that FEELS tight, because the lobe of the camshaft is pushing up on it. Turn the engine over a little bit at a time by hand (I believe you need a 15/16 socket) and try and wiggle...
  13. BlooDReigN

    Valve Cover and Intake Gaskets - What kind are best?

    +1 on the valve cover gaskets. I have them on my engine and have re-used them tons of times now.
  14. BlooDReigN

    N/A Stroker Help!

    My 408 is making 417whp @ 5300 and 437wtq @4700. AFR 205 heads, custom cam, TFS box R intake, 42 lb/hr injectors and 10.9:1 compression. Still hoping to get a bit more power out of it this year with some "tweaks" before I put the nitrous on.
  15. BlooDReigN

    ASAP pls! Nasty noise, happened out of town, Broken rocker?

    No point in buying the parts until you find out what the problem is, like was already said. And it's not like you have some strange engine that you need to wait 2 weeks for the parts to come in for. You can go down to Mopac or any parts store and they will have any performance part you could...
  16. BlooDReigN

    ASAP pls! Nasty noise, happened out of town, Broken rocker?

    Well, theres a 5.0 H.O for sale locally for $500 if you **** that one up :nice:
  17. BlooDReigN

    ASAP pls! Nasty noise, happened out of town, Broken rocker?

    Make any progress?
  18. BlooDReigN

    ASAP pls! Nasty noise, happened out of town, Broken rocker?

    The upper intake pretty much has to come off in order for the valve covers to come off if I recall. You should be able to get a new intake gasket and valve cover gasket (if needed) on sunday and have it back together. I'm not sure what they have for junkyards in town, but once you get the...
  19. BlooDReigN

    6am... still haven't slept...

    Yeah...every Friday and Saturday night theres quite a few people that meet at that Tim Hortons. Some nights theres probably a few hundred cars there. It's not just a Mustang thing though, theres all kinds of cars out there. Usually starts getting busy around 9-10 and tapers off around midnight...
  20. BlooDReigN

    6am... still haven't slept...

    Don't you live in Calgary? I think I've seen you post on Pshop. Anyway, you should go for a cruise down 17th ave or go meet some fellow Mustang guys down at Tim Hortons on 61st ave and Barlow trail. Join in with the laughing at the ricers :D Should be able to have fun at either location...
Top Bottom
Back
Forums
Menu