Search results

  1. larrendeuce

    Sway Bar sizes??

    http://www.mach1registry.com/Specs/Specs.htm Scroll down, has Mach 1, GT, and Bullitt specs. No info on the cobra though.
  2. larrendeuce

    Mach 1 Is this a good price?

    Seems like a good price to me, take a good walk around it, some people treated these cars pretty harshly, paint chips, dents, etc. Might be why its so low. See what you can talk them down to before you even see it.
  3. larrendeuce

    What are the differences between a GT and a Mach 1

    Besides cosmetics, in no particular order. Tokico shocks and struts, unique swaybars, lowering springs, specific higher effort rack and pinion, 40mm piston cobra brakes with ABS(larger then 99-01 cobra), 17" spare to clear the front brakes, solid rear, 28 spline axles, 3.55 gears, Traction...
  4. larrendeuce

    Anyone buy a 03 Cobra spoiler from the dealer?

    I haven't bought a spoiler but call the parts department and ask them for a parts breakdown. They should be able to tell you exactly what comes in the box.
  5. larrendeuce

    Mach 460 Question

    Factory speakers would be your best bet if the system hasn't been cut up too much. I have read people think the mach 460 sucks, I drove a 2001 GT with the mach 460 and it didn't sound good, but the system in my 04 Mach 1 sounds great, wouldn't trade it for anything. I think age and use have...
  6. larrendeuce

    Mach 460 Question

    Someone very knowlegable wrote a whole thread about how the mach system is wired and its specs. Its much more in depth then the common info websites that people often link to. I'll see if I can find it and post a URL.
  7. larrendeuce

    Mach 460 Question

    The tweeters are 300hz and up, doors are 300 hz and below. The woofers aren't wired in stereo, the tweeters are.
  8. larrendeuce

    2004 Door Panels

    sure can
  9. larrendeuce

    2004 Door Panels

    The soft construction of the new door panel is more dense and makes the interior quieter, less prone to rattle.
  10. larrendeuce

    How to tighten strut

    There is a tool called a drag link socket, looks kinda like a flat head but its thicker and made just for this job. Should be able to get one from snap on, matco, or even try craftsman.
  11. larrendeuce

    5.0 badges on a 4.6 stroker?

    I thought about adding 302 badges to the shaker if I change the displacement. I'd actually like to find some in the same style but says 281. You think the saleen ones would be too confusing?
  12. larrendeuce

    Pypes Violator Dyno Results

    The results can skew pretty far from one another depending on the weight they dialed the car in for.
  13. larrendeuce

    Pypes Violator Dyno Results

    Mustang dyno puts a variable load on the car depending on weight. A dynojet gives the same load to every car on it. I had my car on a dynomite dyno which is similar to a dyno jet, the guy says it reads about 40 hp lower then a dynojet. So 180hp is about 220hp and 220 ft lbs is about 260...
  14. larrendeuce

    My car vs. corvette C5-R

    I agree with everyone else, its a C-5 with a silly badge. Its possible there is work on it but real Z06 models have a duct right before the rear wheelwell.
  15. larrendeuce

    Mach 1 spoiler install question

    I just went out and checked, its perfectly flush with the fenders, maybe 1/4" from flush at the front.
  16. larrendeuce

    Mach 1 spoiler install question

    The fenders more or less, its not really that noticeable.
  17. larrendeuce

    Advise for system with stripped interior?

    Before going into anything else, I have to ask why would you put dynamat, subs, and full stereo in a car without an interior? All that stuff easily weighs more then the interior would. I would think if you want to keep it light for the best track times, but need a stereo go with a set of 6...
  18. larrendeuce

    FRPP adj clutch cable busted. where to get OEM?

    My MM firewall adjuster looks longer, like it has more threads then the no name one on my GT. Whatever works. :nice:
  19. larrendeuce

    FRPP adj clutch cable busted. where to get OEM?

    You can get heat sheilding tape, summit has it along with probably any speed shop. The MM Universal ford cable is longer then the stock Fox cable, should be able to move it farther away from the exhaust.
  20. larrendeuce

    4.6 borla mufflers

    They should work if you already have a 2.5" aftermarket catback, just need some band clamps.
Top Bottom
Back
Forums
Menu