Search results

  1. W

    Dyno results Underdrive pulleys

    Also by making the water pump pulley larger you can keep the same size belt.
  2. W

    disconnecting battery ? & i got supercharger

    Yeah, like Q said you will only lose the adaptive part of the memory, but the factory tune will still be in place. After you fire it back up it will re-learn everything all over again. Also don't freak out when the idle doesn't immediately return to normal after the first fire up, that is just...
  3. W

    GT500 airbox and MAF retrofit for GT?

    Yow! Sixty-four hundred bucks buys alot of dog biscuits. Though 500 ponies is nothing to growl at.
  4. W

    GT500 airbox and MAF retrofit for GT?

    Seems like too much work unless you are also using a rear induction supercharger like the GT 500. :shrug:
  5. W

    JPC Driveshaft

    Here is one from beneath.
  6. W

    JPC Driveshaft

    From the rear.
  7. W

    JPC Driveshaft

    Don't forget the two on the center, and you probably won't even need to mess w/ the exhaust depending on how high you are on jackstands. You should be able to slide the stock shaft out rearward and the new in in reverse order. That is so long as you are not running some crazy exhaust setup.[/IMG]
  8. W

    Yet another next mod thread......

    Did anyone read that page on the first link. The last sentence of the paragraph in bold. Does not fit GT or V6. LMAO. So what does it fit? I mean for 6 Bills you might want it to fit.
  9. W

    Help for the new Guy!

    I re-read the article I mentioned above and it looks like you can only use factory manifolds or shorties w/ that setup.
  10. W

    Help for the new Guy!

    I believe the Saleen and Magnacharger can also be installed with the 3/36 warranty. The exhaust question is quite subjective but for the most additional power on a s/c car bigger is better. I'd say ceramic-coated long tubes, a good X and some good free fowing mufflers. 5.0 Mustang and Super...
  11. W

    Problems with Gas guage & the computer?

    I had the same thing happen on a really cold morning. I started it up to head home from work and got the chime and message on the trip computer. My gas gauge was on E and I thought someone might have siphoned my gas overnight. Well I headed towards the nearest gas station eyeing the gauge like a...
  12. W

    Next Gen Stang to include 4 doors/wagon variants?

    +1 for Falcon. It's the car the original Mustang was based on so let's go full circle. Their were also 2, 4 and 4-door wagon variants. No toes stepped on. If they do decide to go forward with this I'll never buy one, I never liked the hatch on a Mustang never owned one of them either. Now if...
  13. W

    JPC Driveshaft

    Actually mine only weighed 39lbs, but that is still a significant amount compared to aluminum or chromoly. I have not installed my shaft yet as it is still being assembled (parts on back order) so I can not comment on the rest but a 22lb drop in rotational mass should free up quite a few ponies.
  14. W

    Electronic Traction Control

    Yeah the TC prevents wheelspin by cycling the rear brakes(that's why you can't get TC separate from antilock) and either reducing fuel, spark or both. These all reduce power to the ground to limit wheelspin. While at launch a moderate amount of wheelspin is actually benificial as your engine...
  15. W

    Mustang vs. mustang

    Anyone else seen the video on the homepage. This so called car guy is tooling around a track in a V6 vert that he touts as having a 4.6 liter heart and 300 horsepowers. The mustang is the four-legged variety and does it in 38 sec. and the Mustang does it in 40. I know it's pitiful but if you're...
  16. W

    Which 07 Interior Charcoal or Satin

    Yeah the charcoal is better IMO. My buddies '05 has the satin and he says it can get kinda bright with the right sun angle
  17. W

    Jack Points

    The ends of the subframes are sturdy enough to jack or stand the car on and is usually where unibody cars are lifted on a hoist other than the rocker panel jack points. They are located inboard and more towards the end of the car but only slightly, and should be far enough away to jack from one...
  18. W

    gears and the automatic

    Are the internals identical i.e. bearing kit for the 8.8 on S197? I ask because I have a 3.73 ring and pinion and bearing kit I bought for my fox but would rather install in my '06, with the extra weight it would need it and with the modular it would love it. Also do you have to remove the...
  19. W

    2005-2007 Mustang GT MagnaCharger Sale!!

    Is that a roots or twin screw? Just curious as these put down some impressive numbers and a blower is in the back of my mind. A friend is looking to buy my fox and maybe some of the parts I have sittin' and not gettin'. :bang:
  20. W

    05 GT vs 04 Cobra

    Why not go for the best of both worlds and drop the Terminator engine/tranny right in your S197. Sure it has an iron block that would add weight to an already heavy car, but you could drop on a KenneBell or other twin screw-style supercharger and easily get around 700 RWHP. :hail2:
Top Bottom
Back
Forums
Menu