Search results

  1. Tony R

    Anybody used stock Ford parts for a Hydraulic Clutch?

    I dont know if this helps but here is the master for a 94 F150. If you want any more pics let me know. I havent messed with the master but have replaced the slave and it wasn't too bad and yes it has the plastic lines.
  2. Tony R

    EFI starting issue

    I have one in my garage somewhere Darreld. Give me a call if you need it.
  3. Tony R

    In a 66, does a set of 65 motor mounts drop the engine at all?

    I must have the early style 65 mounts in my 65 289 because the header tubes were rubbing on the drivers side tower and right next to the passenger side. I was not aware that there was a difference in the mounts. I was thinking that I was going to try to remedy the problem with a set of block...
  4. Tony R

    Antifreeze leak from somewhere at the back of the block?

    I already have the motor apart. Just need to machine it and parts to put it back together. I want to wait until after paint to start putting the motor together. That way the car should be completed before the motor is ready to drop in so i dont drive a half built car. By the way i have a...
  5. Tony R

    wing removal

    I am not too worried about clearance since the handles are being removed inside and out. I want power windows so I will have a switch on the center console. I am still not fully set on not chopping the top. I might look for a glass that is close and make it work with a glass shop and the...
  6. Tony R

    wing removal

    here is a pic of what I want. only for a coupe so there will be one window in the door
  7. Tony R

    wing removal

    I want to make the front windows a single pane of glasss by removing the wing window. I have seen it before Im just not sure about where to get the glass.
  8. Tony R

    wing removal

    I am looking for the kit or the car that I have to remove the glass from to remove the wing window on a 65 coupe.
  9. Tony R

    Antifreeze leak from somewhere at the back of the block?

    If you want to swap motors let me know. I will gladly do a 289 swap for your blown 302.
  10. Tony R

    Cracked C4 casing... solution?

    where are located at? i have a c4 that i am swaping for a manual.
  11. Tony R

    To tint or not to tint

    gtss. I am planing on doing the same thing with my tint in the rear with the tint following the lines of the stripes. Only I will probably go darker instead of lighter.
  12. Tony R

    What custom license plate?

    I like money pit but it is probly taken.
  13. Tony R

    Took her for a spin for the first time in 4 years! What a BEAST!

    what time do you get home tomorrow? I am working down the street from you. I wouldn't mind taking a look at the beast.
  14. Tony R

    Bonehead

    I was flushing out my radiator and changing my oil in my truck and was not paying attention and poured about a cup of oil into my radiator. The coolant and oil containers were the same size and shape. flushed it out a couple of times and still didn't get it all out. Figured that because it is...
  15. Tony R

    roof replacement progress

    so tonight I started tack welding my skin on and came up with a problem. The rear window is not bent to the same size as the original. It is an 1/8 shorter. So now I have to figure out how to bring it out to match the original pillar on the car.
  16. Tony R

    Took her for a spin for the first time in 4 years! What a BEAST!

    thats great Darreld. Dont blow it up or wreck it before you bring it by.
  17. Tony R

    roof replacement progress

    is it me or did he remove the metal trim around the window? I want to replace mine with something else as well. I just haven't come up with any bright ideas for the replacement.
  18. Tony R

    roof replacement progress

    I am not a fan of the cloth top but I do like the chopped top. Not something that I am willing to attempt though. It might be a little out of my fabrication range. Thatnks for reposting the pics.
  19. Tony R

    G-Bar rear exhaust photo

    did you get to drive it to the shop or haul it again?
  20. Tony R

    Floor pan question

    that is what I put in my drivers side. Sorry I didn't really take any pics of the installation. They took a little work fitting them in but it wasn't too bad.
Top Bottom
Back
Forums
Menu