Search results

  1. mhanksii

    Supercharger advice needed.

    I have a MagnaCharger and all I can say is, wow. I have been in cars with whipples and Roush blowers and while they have more top end they don't near the down low pull the 112 has. The grunt of the MagnaCharger is unreal. Ok now that my comments sound they were written by a 5 year old I will...
  2. mhanksii

    FRPP Hot Rod Cams Installed

    Not to high jack a thread, but my question is how would these cams work in a S/C engine. I have a MagnaCharger running the stock 3.3" pullie and have belt slip now so I am looking for something other than a smaller pullie to boost up my car just a bit more. Oh yeah and that sound isn't bad, I...
  3. mhanksii

    Do NOT ever buy from this website !!!

    Unreal, let us all hope that they don't stay in business for long. You have to know what you are selling, you don't have to be an expert but this is a case that simple knowledge of your product could have helped. Good luck getting your money back!
  4. mhanksii

    CAI and MagnaCharger

    no one else has seen the Steeda CAI mounted to the MagnaCharger? Also, a taller tire is the same as putting taller (numerical lower) gears in a car correct?
  5. mhanksii

    CAI and MagnaCharger

    I have heard some where that the Steeda CAI kit fits on the MagnaCharger S/C? I can't find it anywhere on the net now that I have the S/C on my car. Can anyone help me out? Also all the Forced induction cars out there, what is your secret for traction?
  6. mhanksii

    Electricly dead motor?

    OK so I got my car back on Monday just had not had the time to post anything since then. It was indeed a loose ground wire but before the flaming begins, it did take a Ford Tech (their Mustang GT guy who drives a Procharged 06 himself) a full working day to find himself. He wasn't there for me...
  7. mhanksii

    Electricly dead motor?

    Your talking about the power distribution block, if so I completely took it apart (four bolts) and looked it over real close, nothing out to the ordinary there. All the pins on the bottom were straight and no rust or wear marks. Doesn't look like anything got hot down there. Are you talk about...
  8. mhanksii

    Electricly dead motor?

    The fuse is labeled Engine #2 and the car does not run without it or even start. The heat exchanger/intercooler water pump relay was wired backwards :notnice: so the power distribution block saw a short when I turned the key on and explains all the heat that the fuse saw instantly. The...
  9. mhanksii

    Electricly dead motor?

    The fuse melted because I had the inter cooler relay wired wrong, by the way the fuse never blew just melted beyond belief so I changed it, well I had too. That was my very thought today, I checked the battery first then that alternator with a multimeter. I watched for voltage drop and...
  10. mhanksii

    Electricly dead motor?

    I have been driving with the MagnaCharger for well over a month, the only thing that changed was taking the under-drive pullies off and putting the stock pullies back on. I have checked all the wires and completely dismantled the power distribution box and there is no sign of any damage other...
  11. mhanksii

    ET Streets on 17" wheels

    Everything that I have read says the MT's are made really wide and the min rim width is just that unlike the Nitto's that run narrow and allow you to squeeze wider tires on a more narrow rim. Just my .02$ I have 275 nitto 555R's on my stock rims.
  12. mhanksii

    Electricly dead motor?

    the plastic on top (not the lid but the center section) got hot and some of it melted just a bit. So I smoothed it back out and made a clean seat for the 15A fuse again.
  13. mhanksii

    Electricly dead motor?

    Ok so here is the deal. I have a MagnaCharger on my 05 GT and during the install I toasted a 15A fuse. It is labeled Engine #2 and that's it in the owners manual. I cleaned up the power distribution block with a Dremal and put in a new fuse and the car ran fine with some Steeda UD Pullies. I...
  14. mhanksii

    28" M&H tires

    do you have the 275/40-17 on your stock rims or the 245/45-17?
  15. mhanksii

    28" M&H tires

    Do to budget woes I had to skip the MandH's and have some 275/40-17 Nitto555R's on the way. I have read that they are more like a 255 sized tire and that they do mount up fine on the stock 18X8 rims for daily driving.
  16. mhanksii

    28" M&H tires

    I am about to pull the trigger on a pair of 275/50-17 MandH's. I can't find anything on the web or from the local tire shops that say there will be any problems with them on the stock 17X8's. I have also heard the only drag tire that is better in the rain is the Nitto 555R but they don't even...
  17. mhanksii

    28" M&H tires

    Are you talking about your Nitto's or your M and H's? Also are you running any of the above on stock 17X8's?
  18. mhanksii

    28" M&H tires

    I have heard they fit, but are they an acceptable street tire? I have a Jeep for the bad weather but do drive cross country from time to time. Also how is that 28" tire going to effect my car at the 1/4 mile? because I am torn between these M&H's and the Nitto 555R drag tire (275/40-17) but I...
  19. mhanksii

    12.41 @ 109.35 N/A Auto New Best

    wow you were hustling down that track. Nice time and congrats!
  20. mhanksii

    28" M&H tires

    I found these on Jegs website and was told (not sure if I trust the info) that since they have such a tall sidewall on them, they will mount up to the stock 17X8 with no problem and there is no fear of them rolling off the rim in the corners either. Anybody know what our cars would do with a 28"...
Top Bottom
Back
Forums
Menu