Search results

  1. rhyno9

    Oil Leak from back of Engine

    Flexplate to Crank bolts? When you installed the flexplate did you use a sealer on the bolts that hold the flexplate to the crank? If not then I would bet "the farm" that is where your leak is coming from.
  2. rhyno9

    Any conversion kits for a late-model, center mounted E-brake?

    Search on the vintage-mustang.com for a user named deathman68. Hid did that very thing and posted a nice writeup including pics.
  3. rhyno9

    underhood roots style blower??????

    scroll down to the 174 model http://holley.com/HiOctn/ProdLine/Products/AMS/SC/SCK/Pro-Street.html
  4. rhyno9

    Engine balance?

    Does it feel out of balance while the car is moving or are you seeing this when you rev the car while standing still. My gut says check the driveshaft balance.
  5. rhyno9

    cheap 351C swap?

    The 250 6 banger used the same motor mounts as the V8 (cleve or windsor). I think that the c4 and rear should be okay. Typically the 250 six had the 8 inch rear and the same c4 that went behind the 302.
  6. rhyno9

    4.6 in a '67?

    www.dvsrestorations.com
  7. rhyno9

    Lincoln efi

    Mass air or speed density?????? It doesn't really matter. Both will provide you better gas mileage than a carb. The difference lies in the mass air system is much more capable of adapting to changes to the motor. If you up the engines ability to breath (intake,cam,heads,headers) the mass air...
  8. rhyno9

    Lincoln efi

    Lincolns never used the mass air system. They can however be changed to massair fairly easily and inexpensively. Do a google search and you will find what you are looking for. The easiest and best way to go is find a lincoln lsc(markvii) and pull the whole system including the...
  9. rhyno9

    94 Thunderbird HO into 68 Stang

    It is entirely possible that a HO motor has been swapped into it. The key is if you are planning on modifying it and using efi then it should be converted to mass air. The E cam probably won't run right due to the different firing order and changes in duration/lift. If running a carb it would...
  10. rhyno9

    94 Thunderbird HO into 68 Stang

    I don't think it and HO motor To the best of my knowledge the tbird never got the HO motor. That basically means it won't have forged slugs and it will use the old 289/302 firing order. The HO motors use the 351 firing order which supposedly puts less stress on the crank. Also those are...
  11. rhyno9

    Granada

    granada rotors test fitment Here is what you do. Go to a good auto parts store that will allow you to return the item. Buy 1 rotor for the granada. Bring it home pull the wheel and try to fit it in the wheel. If it fits great then you will only have to buy the other rotor and bearings if...
  12. rhyno9

    Granada Spindle ????

    Try a Grinder and a cutoff wheel Use a right angle Grinder and a 4.5 inch cutoff wheel you can slide the cutting disk up between the spring and the hanger. You might hit some of the rubber bushing but it won't be too bad. What will happen is the sleave and the bolt will get hot and then...
View older results
Top Bottom
Back
Forums
Menu