Search results

  1. S

    At what temp. is overheating?

    Ive also noticed this with my 69 also. ON the highway its about 180 to 185 degrees, but if I let it sit and idle it creeps up to 200 205 degrees so I wasn't sure how hot is to hot. Thanks for the info
  2. S

    autometer converstion question for those who've done it

    Thats for us older guys over 40 that can't see very well. HA HA HA.
  3. S

    Post Your Stang!

    <a href="http://imageshack.us"><img src="http://img518.imageshack.us/img518/6894/daisysandmustang0265xx.jpg" border="0" width="1600" alt="Image Hosted by ImageShack.us" /></a>
  4. S

    autometer converstion question for those who've done it

  5. S

    New Paint Job. Question on washing

    Thanks for the info on towels Steve
  6. S

    New Paint Job. Question on washing

    What towles should I be using for washing drying and waxing. I dont want to get those small scratchs in the paint. Thanks
  7. S

    New Paint Job. Question on washing

    What towles should I be using for washing drying and waxing. I dont want to get those small scratchs in the paint. Thanks
  8. S

    1st Wash. '67 FB

    Nice pic and Nice paint job.
  9. S

    After 5 years..

    Nice Pics, That Stang is going to Fly.
  10. S

    69 Fuel cap

    I had my mustang painted last year and I didn't want any fuel comming out on the new paint job. I think I tried about 6 caps before I found one that fit it really nice. To tell you truth Im not sure what car the part # fits but it works. Steve69
  11. S

    69 Fuel cap

    Hey Guys I found a fuel cap that will fit under the pop open cap. You have to remove the old spring and seal from the pop open. The cap is Napa 703-2005 part #. Steve
  12. S

    Help with Electrical Gremlin

    I also just added a 130amp 3G alternator and didn't think of the amps. I have between 13 and 14 volts when engine is running. Not sure about the amps.
  13. S

    Help with Electrical Gremlin

    What is Koeo and Koer?
  14. S

    Help with Electrical Gremlin

    Yea your right. There was a fulltime power that connects to battery and the other wire which is ingnition power on. I did double check the wires and there wire correctly.
  15. S

    Help with Electrical Gremlin

    Hey Guys Ive took my mustang out a few times this year and noticed a electrical problem and Im looking for some areas I should be checking. Last year I installed a new Holley Avenger Carb 570 and a Mallory Hyfire box and a Msd Blaster. Im also running a Unilite distributor. I also...
  16. S

    Aftermarket Gauges in 70/69 Mustang Dash

    Check out this site. I did a Autometer 5" Tach and Left ther original speed ometer and then I used the White faced Summit 25\8 gauges on the outside.http://www.geocities.com/kvinkler/gauges/page_01.htm
  17. S

    New clutch – jerky during feathered take off - ?

    I also had bad clutch chatter. My whole care would shake when I took off. The Problem I had was the Pressure plate bolts were slightly to long. When I torqued to 25 pounds the pressure plate was still not a tight as it should be on the flywheel. I bought some new ARP bolts and installed a...
  18. S

    Please help!!! Starter/ flywheel question

    I would first backtrack what you did? What kind of problems did you start with? If it worked fine before you started you probably have a bad starter thats not engaging properly. There is 164 tooth flywheel and 157tooth flywheel. If you have a 164 tooth belhousing and 157 tooth...
  19. S

    67 289 clutch choices

    The 10" you can use the Diaphram Clutch. Long style you can use 10 1/2.
  20. S

    Anyone Seen this before?

    Price seems a little high also.
Top Bottom
Back
Forums
Menu