Search results

  1. Jerry Leaming

    Where to buy RPM gaskets?

    I got my gaskets from Summit I dont know the part number just ask they are usually really helpful. With the spacer you will need two gaskets.
  2. Jerry Leaming

    ?

    Another free post. It like taking candy from a baby. Just to easy.
  3. Jerry Leaming

    Off Topic...Could this be a scam artist?

    I agree sounds like a scam.....Get the cash in hand before you give up the keys or sign any paperwork.
  4. Jerry Leaming

    Skat or Eagle cranks??

    I run Scat steel in my 393. No problems yet knock on wood.
  5. Jerry Leaming

    ?

    I'll second that...??
  6. Jerry Leaming

    Swap headers for a 351W

    I used the hooker super comp swap headers on my car they fit great and allow you to use the stock/aftermarket h-pipes. The EGR tube boss is not there so if you want to run that you will need to weld on a boss and bend a new pipe. If I recall right I got them from Jegs.
  7. Jerry Leaming

    Just Changed Oil --> Slight Problem Now...

    If you keep the oil clean than there is no reason to put new oil in. Get a CLEAN oil drain pan.. drain the oil and put back in what you need.
  8. Jerry Leaming

    Just Changed Oil --> Slight Problem Now...

    Too much oil can cause the crank to slap the oil when its rotating causing a viberation. Not Good. I have heard that the filter holds about a quart of oil.? If you ran the car than that might be an idea or just drain out the extra oil.
  9. Jerry Leaming

    HELP! My car is running horrible!

    Yes the gap of the plug could and does affect performance. If it ran better before the plug/wire change than recheck everything including gap. Also are the wires in the correct firing order? ----13726548----You also might have a bad wire or one not on all the way.
  10. Jerry Leaming

    Head dowels needed ASAP....

    Check your local machine shop. They usually can find some out off an old engine they tear down.
  11. Jerry Leaming

    Quick question about oil for our cars..

    Also another problem with switching to synthetics on a higher milage car is the synthetics can get by your old seals/gaskets and start a leak. And I agree that 10-30 would be good just don't get anything higher than 10 for the first number usually the colder it gets the lower first number you...
  12. Jerry Leaming

    Car hesitates and pops after cam install

    .578 is your lift with those rockers. Can your valve springs handle that much lift? Did you check piston to valve clearance? Did you check your timing with the spout disconnected? Might be one of the before mentioned problems or maybe Plug wires out of order. Just a couple ideas.
  13. Jerry Leaming

    New Guages , but want to keep old also

    Like was said before for electric or mechanical just buy a tee for the same size you are adapting to and adapt it over with a tee inline. This works for water,fuel,oil, or any sensor you need to tap into.
  14. Jerry Leaming

    Wix 51515

    the Wix # sounds right Napa gold filter #1515 same filter
  15. Jerry Leaming

    Is it ok if the battery kill switch is "Pull off" instead of push off?

    From what I remember it has to be push off to be legal.
  16. Jerry Leaming

    FMS block differences

    Ok I did some more searching 9.2=cleveland - 9.5=windsor? And whats the hp rating on the sportsman A58 block compared to the W351 block? Theres about 600 dollars difference betwen the two. Any Ideas?
  17. Jerry Leaming

    FMS block differences

    Anybody??????
  18. Jerry Leaming

    FMS block differences

    What is the difference between the fms engine blocks #M-6010-V351 with a 9.2 deck height and a fms #M-6010-W351 with a 9.5 deck height? Are the heads/intake/exhaust going to be in the same spot with each block. The blocks are the same price but I'm confused on which block is like the one I'm...
  19. Jerry Leaming

    Distributor Differences

    Roller motors use a bronze or a steel dist gear the non-roloer motors use a cast iron gear. Other than that I think they are interchangable.
  20. Jerry Leaming

    NITROUS guys, quick Question

    The NOS kit is what i use and it is a pretty nice kit. It comes with all the parts needed to complete the install. The kit will work fine as long as there are no exsisting problems with your car. Timing can be a problem if your running to much I usually keep mine at around 12-13*. There are...
Top Bottom
Back
Forums
Menu