Search results

  1. Venom_Nitrous

    Oil Separator Installed..full..help!!!

    That doesn't make sense tho. If it would have burned that much oil after 5 miles, think what it would have been like after 1,000 miles. It would be like 200 of those. That is more oil than the engine holds probably. How much was it using before the separator was put on. If it didn't use at...
  2. Venom_Nitrous

    Oil Separator Installed..full..help!!!

    It may be mounted to low relevent to the PCV and actually siphon it out. That would be my only guess.
  3. Venom_Nitrous

    updated vid from blown vt engine

    sounds like a novi 2000.
  4. Venom_Nitrous

    updated vid from blown vt engine

    motor, mods and what brand of sc?
  5. Venom_Nitrous

    who has nitrous...

    Noszle kit, 125 hp jets, NX Gen X2 kit (purge, heater, blow down tube, pressure guage), 20 lb bottle. HP number are in the sig. that was the 850 psi tho so I would say another 10-15 hp with 1000psi. Edit: Without nitrous, I have 250 rwhp and 290 rwtq.
  6. Venom_Nitrous

    Clutch pedal vibrating

    mmr has a performance one.
  7. Venom_Nitrous

    How hard is it to put a tac and shift light in?

    Not hard at all. I have since hidden the wires. I have a dual pod with afr and d-pic guages on the a pillar too.
  8. Venom_Nitrous

    Back from the dyno after PI intake install....

    Could his numbers be way off because he told the dyno operator that he had 2.73's when he maybe has 3.08's? And drivetrain loss is about 20% auto, 15% man.
  9. Venom_Nitrous

    How to tell if my car was geared by PO

    T45 + 3.73's = 1st - 5 mph for every 1000 rpm's 2nd - 10 mph for every 1000 rpm's 3rd - 15 mph for every 1000 rpm's 4th - 20 mph for every 1000 rpm's 5th - about 29 mph for every 1000 rpm's
  10. Venom_Nitrous

    noszle kit install help

    Oh yeah, the 125 shot jets gave me exactly a 90 hp increase and about 100 ft lbs.
  11. Venom_Nitrous

    noszle kit install help

    Follow instructions. That being said, here are some thingas I have done to mine to make it functional 100%: 1) Use good quality liquid teflon on all NPT fittings. Especially the ones on the distribution block. 2) To tighten the fittings on the distribution block, get a line wrench. I had...
  12. Venom_Nitrous

    Damn bug splatters, anyone have a trick to gettinem off

    I do that behind the rear tires before a night on the track. Helps peel the Micky Thompsons off the rear bumper.
  13. Venom_Nitrous

    Damn bug splatters, anyone have a trick to gettinem off

    WD-40 and armor all. Works for me.
  14. Venom_Nitrous

    Teksid block #'s, is this one??

    Does a 97 cobra engine have a teksid block. The casting # is RF-F6LE 6015-AA.
  15. Venom_Nitrous

    spedometer went out!

    My speedcal did that once too when I had the batt disconnected over the winter. I disconnected the pos feed to the speedcal and plugged it back in and it worked. :shrug: Beats me, but try it.
  16. Venom_Nitrous

    Just Dyno'd my GT...

    see sig. 250 hp on a dynojet.
  17. Venom_Nitrous

    T&J performance

    yep
  18. Venom_Nitrous

    04 GT Manual Transmission Rattle

    Mine rattles, but I think a piece of the clutch is missing. I am going to make a thread about it tonite.
  19. Venom_Nitrous

    making a mustang ride like a caddy

    See my sig. Smoother than stock. 15 inch wheels help. Oh yeah, just don't take a turn over 20mph.
  20. Venom_Nitrous

    Need simple wire advice.

    you are correct
Top Bottom
Back
Forums
Menu