Search results

  1. Firme

    1995 cobra sig?

    I believe that started in 1996 with the introduction of the 32valve 4.6 powerplant
  2. Firme

    Steeda Strut Tower Brace

    I wount NOT recommend the Steeda 03-04 STB. It only mounts to the two strut towers and not to the firewall. Look around, there are better 3 or 4 point STB's out there. As far as install. It mainly drilling into the body. I did mine myself. But I don't thing it was as cleanly done as...
  3. Firme

    suspension is going on!

    Your car will feel like a totally different car :nice: and nowhere near as sloppy. On mine, the IRS bushings made it real abrupt on taking bumps, but then again I also did upper and lower IRS control control arm bushings at the same time. You will eliminate most of your wheel hop, but the...
  4. Firme

    New 99 Cobra Owner! Few questions...

    First off congratulations on your purchase. As far as oil, especially on that low of miles, I would recommend nothing but synthetic. There are plenty of threads on this forum about oils and the advantages of synthetic. I personally run Series 2000 0w30 Amsoil. But that might be an overkill...
  5. Firme

    what springs to lower cobra?

    dang, a bunch of Eibach folks here me personally, I like H&R springs... but then again, I'm looking at it from a handling performance aspet. I would recommend H&R's and Bilsteins..The 03's bilstein used to be a good deal, but for what they go for now, I would recommend the Bilstein HD...
  6. Firme

    Regular Unleaded Gas Question????

    I would NOT recommend doing that at all. Like some said already, it will detonate and ping. This is bad, especially on 01's that already have ping issues. Alot of times, people can't even notice detenation at low levels, so they say their car runs fine. Then again, maybe they never rev it...
  7. Firme

    Pro 5.0 or Steeda Tri-ax

    I own the steeda and have tried the pro-5.0 many times, and i highly recommend the Pro-5.0 with a MGW customizable shift handle.... this is comming from a Tri-ax owner... http://www.mgwltd.com/mustang_shift_handle.html
  8. Firme

    2004 Cobra + ?

    the car has inherent understeer, but the 03-04 have the best job in feeling neutral for a Cobra, the stock suspension is the best to date if you want to corver carve, stick with the 275's out back, or else you will be pushing the car in the corners and straining the front tires to stay...
  9. Firme

    What will 3.73s do for my '01?

    I say 4.10's that is neive for the record, people with 4.10's tend to get BETTER gas mileage in their cars than they did when they had the stock 3.27's
  10. Firme

    New in this place, 01 Cobra, couple ?'s

    Nice choice :nice: like psnous said, 400 to the wheels is gonna be real tough... you would definitely need to crack into the engine and do a head and cams swap, maybe a stroker. Its ALOT cheaper to through on nitrous or a blower.
  11. Firme

    Houston to Austin Cruise, March 27-28

    here is some more details: The Houston Crew will pull into Austin a little after noon to the meeting spot. We will grab a quick bite if needed and freshen up. By the time we are done, Hopefully the Austin, San Antonio, and Dallas crew will be there. It will be time to head out for the Cruise...
  12. Firme

    got sum ideas...

    I got the joke..as long as its a joke, no need to lecture ya. I would not get the Steeda U/D and T/A, especially not bang for the buck. gears would give you the best bang. or some exhaust. I would not recommend the T/A for our cars sine a chip would be able to take care of that and its...
  13. Firme

    Houston to Austin Cruise, March 27-28

    we are meeting in austin in the afternoon (around 1 or so) and doing a hill country cruise. After comming back to Austin, we will check into the hotel, then meet for dinner. Afterwards, those who want to, can go bar hopin down 6th street(its only a couple of block from the hotel) :nice:
  14. Firme

    cobra to sound euro tuned exhaust?

    IMO the closest you will get is an FR500 Catback with a catted X pipe... the cats will mellow the engine growl and the X from X pipe and the X from the FR500 (two X's in the exhaust total) will make it sound pretty exotic compared to other choices. The fr500 by itself make the car have a...
  15. Firme

    Houston to Austin Cruise, March 27-28

    We are staying just south of the capital off Congress by 6th street. We are meeting people from Austin/San Antonio/Dallas and of Course the Houston crew somewhere on the southwest side and going down by I think Bee Caves Rd. or hwy 2244 and 962, we are still working out the final meeting spot...
  16. Firme

    Houston to Austin Cruise, March 27-28

    hmm there is bound to be some Houston/San Anotonio/Austin/Dallas people in here.. we have a group from each of these cities coming :banana:
  17. Firme

    I was once blind...now I can see...(those w/yellow headlights)..

    well, I am seeing this a little late, but I can vouche for 97CasperCobra. He is in the SVT Cobra Mustang Club in the Houston area. This is not an ad, its a product experience, he had told me he was going to try that product out and see how it work 1st hand. The first pic is either at one...
  18. Firme

    01 Cobra problems

    Good info in this thread. If you do have a pinger, a good tuner can take car of it. mine does it under certain conditions (cold weather, hard acceleration) and talked to Jerry from SCT about it, he stated he had tuned many 01 pinger and its easy to fix, he even told me what values needed...
  19. Firme

    Anyone who tunes, wants to tune or is interested should read this

    I was fortuante enough to watch Jerry tune a few month back. The guy is simply amazing. He makes it look so easy. In 3 runs, he tuned a 03 Cobra with a KB, cams and ported heads. The car came to him with a diablo chip tuned by strictly performance with 16 hours of billed dyno tunning done...
  20. Firme

    Houston to Austin Cruise, March 27-28

    bump
Top Bottom
Back
Forums
Menu