Search results

  1. AUBURN1111

    Injector Size?

    42 or 60 lb injectors for a 306 stock heads running an Vortec S-trim? Leaning towards the 60s because of planned future mods, heads, cam, intake etc.
  2. AUBURN1111

    Digital Tuning Megasquirt 2 Pnp Basic Tune, 1st Time Install

    Thanks Steve, I have read that help thread lots of good info there.
  3. AUBURN1111

    Digital Tuning Megasquirt 2 Pnp Basic Tune, 1st Time Install

    60lb is what I'm looking at
  4. AUBURN1111

    Digital Tuning Megasquirt 2 Pnp Basic Tune, 1st Time Install

    5.0L 306 19lb injectors, stock heads, cam, S-Trim vortech (larger injectors coming soon). I started with the base tune and watched a bunch of basic setup videos to get going. Started the car notice its idling around 1500rpm and headers glow red so I shut it off. Ive uploaded the *.msq file if...
  5. AUBURN1111

    Megasquirt Pnp Install

    Im modifying the factory bracket to install the ECU in the factory location but it seems a little narrow to fit around the Megasquirt ECU. Does anyone have pictures showing what they did to make it work?
  6. AUBURN1111

    Vortech V1 S Trim No Start

    It starts! Runs great with MAF unplugged not what that's about because it was the one I was using prior to install. Time to order a mega squirt.
  7. AUBURN1111

    Vortech V1 S Trim No Start

    It smells really rich so I don't think that's it
  8. AUBURN1111

    Vortech V1 S Trim No Start

    I just completed the install, starts up runs for about 7 seconds then shuts off. I tried to rev the throttle and all it does is backfire and then die. I've checked basics: vacuum leaks, wiring harness, plugs wires and firing order, good fuel. This was a perfectly running stock 5.0L with a stock...
  9. AUBURN1111

    Vortech S-trim Accessory Belt Length

    Looks good! I think Ill have to hit up some salvage yards and see what I can find. Are you able to retain the factory coolant reservoir?
  10. AUBURN1111

    Vortech S-trim Accessory Belt Length

    Thanks for the help, with the advice I now have the correct belt length! Next problem I have is clearance between the crank pulley and electric fan.
  11. AUBURN1111

    Vortech S-trim Accessory Belt Length

    I'm having trouble figuring out the correct length accessory belt after installing my S trim, what length do I need?
  12. AUBURN1111

    Drivetrain Clutch Issues With Pictures

    Swapped out the clutch for another, same part # and installed it just like the other and this time no issues. I believe that I had a bad part.
  13. AUBURN1111

    Steve's Megasquirt/tunerstudio Help Thread

    Prior to purchase Ive been reading this and other threads, haven't seen this questions asked: Can you retain cruise control functionality after swapping factory ecm to ms?
  14. AUBURN1111

    Drivetrain Clutch Issues With Pictures

    Thanks for that link, I'm wondering if the disk is not compatible with the pressure plate. You can only install the disk one way when I flipped it around it would not sit flush against the flywheel. How much of a gap should i see when placing the pressure plate on the dowel pins with no bolts, I...
  15. AUBURN1111

    Drivetrain Clutch Issues With Pictures

    The throw out bearing was installed correctly and the clutch fork is in good shape.
  16. AUBURN1111

    Drivetrain Clutch Issues With Pictures

    the figures went slightly inward toward the fly wheel when torquing it down. I dont have my old clutch I swapped it out for new under warranty.
  17. AUBURN1111

    Drivetrain Clutch Issues With Pictures

    It's a stock replacement from AutoZone. I had one under warranty so swapped it for new while changing the rear main seal.
  18. AUBURN1111

    Drivetrain Clutch Issues With Pictures

    Installed a new clutch and pressure plate, while installing the transmission I noticed that even with the clutch cable tightened all the way the clutch fork is hitting the bell housing prior to releasing the clutch. Its not my first clutch install on this car and Ive never had an issue. 1992...
  19. AUBURN1111

    Battery Drain; Spare Fuse?

    The spare (7) caused my battery to drain in less than an hour, after removing I never had another battery issue.
  20. AUBURN1111

    Tmi Seat Foam

    I was hoping maybe TMI guys might chime in and offer solutions
Top Bottom
Back
Forums
Menu