Search results

  1. J

    Mustang Drop Spindles

    awsome
  2. J

    Mustang Drop Spindles

    awsome
  3. J

    Questions about building a 1965 race fastback

    this is a little something you might want to look at. http://www.gmachineracing.com/SLAYERpackage.html If you want race quality call us, otherwise we will be overkill for you. Jason
  4. J

    Mustang Drop Spindles

    awsome
  5. J

    Stainless work

    here is a cover we made out of stainless, it is for a 68' Shelby. Jason
  6. J

    rollbar/subframes install question

    I rarely suggest that anyone build thier own cage, but with a kit and taking your time you will get it done. The best part is that when done you will be able to step back and say "I built that". Just be vary aware of your welding skill and make sure you are up to the level. Its all in practice...
  7. J

    Anyone here run at Irwindale, CA ???

    ran a SLM there a few times. Jason
  8. J

    G-Machine 66 Stang, "THE CAR"

    yeah, we have a new kit designed that is made with some serious geometry improvement over the M2. Will be out as soon as we can get it to market. JAson
  9. J

    rollbar/subframes install question

    just because it passes "tech" does not make it safe. I have seen some really scary stuff be considered "race" legal. Im not trying to bash on anyones cage work, it just that some break some serious basic design issues. Jason
  10. J

    Im having roll bar problems!!!

    this is a very good example as to why these cage kits are not worth the time or money. I think that the MM stuff is still made by Autopower. At least you got it to a race shop and they were able to fix the problem. cutting the body is not a good idea and will cause it to no be legal and be...
  11. J

    rollbar/subframes install question

    well first things first, the cage kit you are talking about is not safe, its made from 1020 HREW and possibly 1012 HREW in some cases. This is the material used for the tubing and the strength of this is the absolute weakest of the three(4130, DOM, HREW). I do not use any of this material in any...
  12. J

    Subframe connector questions

    this guy knows what hes talking about, i heard he is like the owner of G-Machine or something! :D Jason
  13. J

    Foxbody Cage Pics(Post Some Pics)

    here you go. Jason
  14. J

    Foxbody Cage Pics(Post Some Pics)

    the weight added is more than compensated for by the added rigity to the chassis over all. Jason
  15. J

    Foxbody Cage Pics(Post Some Pics)

    that sounds about right. 6pt, might be more like 70 lbs or 80lbs. Jason
  16. J

    Foxbody Cage Pics(Post Some Pics)

    best way is to build the whole cage then have it painted after. It is time consuming and may take longer overall but its the best and only way IMO. Jason
  17. J

    G-Machine 66 Stang, "THE CAR"

    We use CATIA V5, it was not cheap but well worth every penny! Jason
  18. J

    G-Machine 66 Stang, "THE CAR"

    here is the start of the rear cantilever system! 4130 fully TIG welded! ratio of 1:1 Jason
  19. J

    Foxbody Cage Pics(Post Some Pics)

    im pretty sure they are just the Autopower cages that they sell under thier own name. I do not suggest thier stuff because i feel as though its unsafe. At the least i would add additional plate under the cage and weld the entire structure into the cahssis. When you go to bolt it in i do suggest...
  20. J

    rollbar/chassis stiffening

    thank you, we do alot of cages and suspensions. We are not just a race shop, we are a metal fabrication race shop only. We do two things very good and those are cage work and suspension. I know what i do best and we stick to it. I spend years studying and perfecting the art before i started the...
Top Bottom
Back
Forums
Menu