Search results

  1. apollo12

    Factory Five Replica cobra, 65

    he may have his emails turned off
  2. apollo12

    help with cam

    I vote get a custom cam
  3. apollo12

    how much BWHP

    I'd like to see pics! and thank you for your service!
  4. apollo12

    Top dead center mark?

    yes, make sure your on the compression stroke.(when the air is pushed out of the spark plug hole)
  5. apollo12

    GOING TO CARB...SAME FUEL PUMP?

    someone may have taken the efi pump out of the tank and used the return line for the low pressure fuel line,what carb are you running? on a holley you can change the jets and the cam on the throttle shaft.You need to find out what pump you have and check the fuel pressure
  6. apollo12

    Help with codes 63 and 31

    Is your mustang running? I would double check the engine timing and firing order to be safe also do you know if the guy changed the springs on the heads? if not an e303 cam is to much for stock springs code 63 -you need to set the tps sensor to .999 code 85 -cannister purge, is yours...
  7. apollo12

    Help with low idle....

    If the mustang is stock 750 rpms, not stock at least 950 rpms.Did you adjust the Idle screw?and check the tps?Is your alternator charging?
  8. apollo12

    Anyone have a carfax or autocheck?

    did you ever get the car fax?
  9. apollo12

    GOING TO CARB...SAME FUEL PUMP?

    you will need a return line and a switch to turn the stock pump on, you could tap into the fuel pump relay
  10. apollo12

    seat track assembly

    in the past I have done some welding to the stock brackets for added support, as stated above most fox body brackets will work.I would suggest you sanding and painting the brackets so they last
  11. apollo12

    aftermarket mass air conversion kits

    I have a 1989 5.0 harness if you need one pm sent
  12. apollo12

    swap ?

    you need a computer harness from a 1992/1993 mustang 5.0,a 140mph cluster from a 1990-1993 all other parts are interchangeable
  13. apollo12

    5.0 manual...stalls when coming to a stop or quick deceleration...also rough idle...

    auto zone/discount has code readers for $30.00, I'd say clean T/B and air meter sensor,check timing fuel pressure and is the tps set to around.999? another question is what is your idle set at? My mustangs idle at 950 rpms or as high as 1000 rpms
  14. apollo12

    What are the best jack points?

    I use a jack under the middle of the 8.8 and then jack stands on the outside tubes of the rear,you can use jack stands on the sub frames or on the stock steel arms
  15. apollo12

    Congratulations ALMOST STOCK December 2009 FOTM Winner!!

    Great job on the engine and engine bay!!!
  16. apollo12

    Made Jan Issue of 5.0 Mustang and Superfords

    The mustang looks great! The turbo looks bad a$$
  17. apollo12

    What are my T-5 swap options?

    87-93 mustang t-5's will work,you need to use the 87-93 belhousing and clutch fork,also 94/95 t-5's will work as long as you use the 94/95 bellhousing and clutch fork.I'd run a steel bearing retainer and synthetic atf fluid
  18. apollo12

    Hello

    Welcome to the site!
  19. apollo12

    ill be the first to start it. what are you getting from santa?

    just some tires
  20. apollo12

    GT40P Heads

    $300.00 seems like a good deal,I've seen people ask $300.00 for stock used set of gt40p heads
Top Bottom
Back
Forums
Menu