Search results

  1. H

    T5 Tranny Question

    Is there a differance in the 86-93 GT T5 and the 4cyl T5 tranny? I need one to go into an 87 GT and found a good 4cyl T5, but need to know if it is the same or can handle the HP of the V8. Thanks
  2. H

    5spd T5 tranny

    Is there a differance in the 86-93 GT T5 and the 4cyl T5 tranny? I need one to go into an 87 GT and found a good 4cyl T5, but need to know if it is the same or can handle the HP of the V8. Thanks
  3. H

    T5 Tranny input shaft replacement

    I am helping a friend swap a 94 T5 into his 89 GT We have a good Fox input shaft, but I want to get a new bearing and seal. does anyone know the bearing size and maybe have a blow up diagram for this Tranny. thanks
  4. H

    Best shock/strut combo for sporline springs?

    I love my Tokico Illuminada's. but if you want the real good stuff get some Koni 10ways
  5. H

    alignment

    sorry to say it but you are incorrect.... You can adjust camber, jsut not that much, you can not however adjust caster
  6. H

    alignment

    you would not still need it, and if your tires are not wearing funny, I would not even worry with the alignment until you did the springs
  7. H

    alignment

    what was your reading? What you need is not a camber kit, get a set of Caster/Camber Plates. BTW. What year is your car, has it been wrecked? if it has not been wrecked, and they say it can not be aligned than I throw :bs:
  8. H

    Cobra Brake Conversion

    you need 17" wheels to run the cobra brakes
  9. H

    Where to find Pony Calipers??

    http://www.speedconcepts.net/Cobra_Bullitt%20brake%20conversion%20kits.htm They are bullitt Calipers with the pony on um
  10. H

    Big problem! Help

    but if something is in the fan shroud, it can sound like a grind
  11. H

    braided Brake Lines

    Anyone know where I can get a set of braided Lines for the rear of my 99GT?
  12. H

    Just picked up some Cobra brakes for my GT

    what he said :D
  13. H

    Just picked up some Cobra brakes for my GT

    Pads, and I suggest going to ford and getting some of there 550 degree dot3 brake fluid, about 4 bottles
  14. H

    in laymen's terms, what do steeda's ball joints do?

    Anything below 1.5 inches needs them. The other thing they do is by offsetting some of the drop they raise the roll center of the car above the ground level, where you want it 1.5-3" above ground level.
  15. H

    Just picked up some Cobra brakes for my GT

    The big thing about the rears is, if you do Road Races, you will not boil your fluid anywhere near as quick. the solid rotors on the rear of our stangs SUCK!!!!
  16. H

    Just picked up some Cobra brakes for my GT

    The calipers are the same....... The differance is the Cobra rear rotors are I think 11.65" and they are vented rotors. Best thing to do is get this kit here: http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=6355 The downside, you have to yank your axles to swap...
  17. H

    Guys with aluminum driveshafts , what is the biggest gain you noticed from this ????

    The biggest dif I noticed was that my pocket was a bit thinner :)
  18. H

    Best place to buy tockico shocks

    right here is about the cheapest http://www.morepowerracing.com/default.asp?wipebasket=yes
  19. H

    Losing Oil Pressure above 4k RPM

    remember Ford, even with the bean counters beating them to death, spent the money on a Synthetic blend in your car from the Factory.
  20. H

    Cobra Brake Upgrade

    it is mainly so you do not get as much fade. Your stopping distance is not improved, well not that much, but you will not loose your brakes if you run road courses like I do
Top Bottom
Back
Forums
Menu