Search results

  1. legomaniac32

    ranger and mustang

    the ranger is 2wd
  2. legomaniac32

    ranger and mustang

    also does anyone know of an online source for interchanging parts for a mustang? kinda like this but for the mustang.. http://www.coolcats.net/tech/reference/parts.html i live next to a junkyard, (its actually on our property lol) and they usually go through alot of cars, and before the...
  3. legomaniac32

    ranger and mustang

    i was wondering how much off a ranger would swap to my stang? i may be able to get a ranger 4cyl, with 5 spd. can i use the tranny and pedals? also will a 5 bolt rear end and front spindles fit my car off a ranger? or will the rims from a 4 bolt ranger work too. right now i got plain rims...
  4. legomaniac32

    Coolant Mixing

    i read the links and if you read my post i did say that i wouldnt use the longlife myself either. there are more that dexcool brands of longlife out there, one for mopar, volvo, and ford. but its only dexcool you hear problems from. so i would assume that its their product. i work in a garage...
  5. legomaniac32

    Synthetic or Castrol GTX High Mileage??

    stangman..straight 30w oil??? where do you live man? i hope its hot there all the time. slugga, i agree with hissin50, the detergents in the synthetic help clean any spots where there is sludge which can cause leaks, or make a small leak worse. the high milage oil has additives in it designed...
  6. legomaniac32

    Coolant Mixing

    the orange coolant you mention is a "long life" coolant. ford has it too, think its yellow? the " long life recommendation is about 100,000 mile i believe. where the normal green stuff is about every 2 years. its not good to mix them, although it wont really do any damage but will mess up the...
  7. legomaniac32

    fuel filter

    the fuel pump will either be mounted to the chassis under the car or inside the gas tank. and the fuel filter should be mounted on the chassis make sure before you change it to depressurize the fuel lines or could have a mess
  8. legomaniac32

    parts swaping???

    here is a link that may help..not sure http://www.coolcats.net/tech/reference/parts.html it has some references to the mustang for parts
  9. legomaniac32

    Anti-freeze/Coolant Problem!

    i would go with the cap..most garages have a tester to check if it is holding pressure, and i think its free to test. caps arent that expensive. they really should be changed after you flush your coolant.
  10. legomaniac32

    AOD Problem NOT TV cable.

    i agree with lx302...you need that little gasket in there. that could be the problem. the fluid should have been changed twice in that period you mentioned. that would also explain the old gasket being "burnt" on, when the fluid breaks down it doesnt dissapate heat as well and heats the tranny...
  11. legomaniac32

    How much oil in rear sump?

    you may as well do the whole change since i think there is less than a quart in the front sump. it would cost you for one bottle of oil :confused: hint, if there is a quick change oil place like jiffy lube or something nearby, just ask them for a washer for your drain plug, they usually will...
  12. legomaniac32

    Fuel pump relay location 91-93 ???????

    this may sound weird...but i believe it is under the drivers seat. if you just unbolt the seat you should see it there. weird place for it in my opinion i know its there on some years..not sure about your year hope that helps
  13. legomaniac32

    Tinting my back window question

    never heard of it melting..but i know because of the bumps you have to watch for air bubbles. you may get a bubble all along the defrost strips. about the only problems i have heard about
  14. legomaniac32

    parts cars??

    hi guys, anyone in the moncton area have any old parts cars kicking aroung they want to get rid of? in any condition?? im looking for cars mostly no longer suitable for road at a cheap price (even free would be good lol) will pick up. have access to a flat bed so no wheels isnt a problem. if...
  15. legomaniac32

    Black paint/blue interior??

    mine is twilight blue with blue interior, i think blac would look good with it myself. there should be a tag near the hood latch in the front with a paint code for the original color if you want to know it. or on the door (if it wasnt painted over) should be 2 digits. mine is MK here is a...
  16. legomaniac32

    How much oil?

    id recheck it again at operating temp. let it sit for a few mins after shutting down. too much oil is worse than too little. mine says 5 qts as well (all except turbo, which is 5.5 qts. also remember qts are different that liters. liters are a bit less than a quart ( but not enought to make...
  17. legomaniac32

    Why won't my signal lights work?

    have someone stand out side the car and turn the signals on and check to see if all the lights front and back come on, it could be as simple as a bulb burnt. most cars if one bulb is burnt on the signals, the light on the dash lights but doesnt flash. if the bulbs are fine, then check the...
  18. legomaniac32

    was I screwed on the flush and fill?

    i used to work at a garage that used those machines. it intercepts the coolant flow on the rad hose, (at operating temp so the thermostat is open) the machine pumps the coolant through same as the water pump does. in the back of the machine is 2 reservoirs, one with new coolant and one for the...
  19. legomaniac32

    Help! camshaft Identification

    you didnt mention what year the motor was from or what it was out of? i would say the best bet to find out what info on the cam is, to bring it to and engine rebuilding shop. they can measure the lift, duration etc. then you will know the specs on that cam. i dont think it costs much to have...
  20. legomaniac32

    bodywork question

    ok guess ill go with the made ones :) yes its being welded on by a welder friend of mine. as far as the priming the inside..do i prime the whole part before welding? that wont interfere with the welding? whats the difference with zinc primer and normal primer? thanks for the help lego
Top Bottom
Back
Forums
Menu