Search results

  1. 50FoxBodyGT

    Overheating... best fan

    Or you could just wire it into the keyed ignition switch so it always runs when the ignition is on. I'm currently undergoing a motor swap and think I'm going to put a Taurus fan in while the motor is out. I'll probably just wire it to run all the time like that. The thermostat in the intake...
  2. 50FoxBodyGT

    Overheating... best fan

    This isn't a bad writeup to read.. http://www.fordmuscle.com/archives/2003/02/electricfan/index.php
  3. 50FoxBodyGT

    What oil ?

    10w-30 would be one step up from 5w-30. The first number refers to the cold weight of the oil and the second number the running temp weight.
  4. 50FoxBodyGT

    occasional starting problem ??????

    Hmmm, strange that the car would start at wal-mart by cranking the engine through a push start but not with the starter....
  5. 50FoxBodyGT

    What oil ?

    It would probably be fine, especially being in the north. I live in Michigan and run 5w-30 in all my cars. The lighter weight oils lube a cold engine at startup best. If you lived in a real warm climate you might want to step up to a thicker oil but for us in the north, 5w-30 will do.
  6. 50FoxBodyGT

    new pics

    Nice gatorade! I had one just like it once.....
  7. 50FoxBodyGT

    pics of lowered cars plz......

    Eibach launch drags on rear only ---->
  8. 50FoxBodyGT

    Low Collant

    No, the coolant will not re-enter the system from the overflow tank. You will need to fill the system yourself. Why do people bypass the upper intake hoses like that? My black fox was bypassed when I got it, too.
  9. 50FoxBodyGT

    paxton s/c install

    Sorry, this is off subject from your question but as I have no idea how to answer for you.... Your setup sounds nearly identical to mine except for the injectors. I have 19# injectors. Did you run the car at all with smaller injectors. Would just upgrading my injectors to 24# help much...
  10. 50FoxBodyGT

    Bolt chain down to pull motor...

    I've always just bolted straight to the lower intake manifold and never had a problem. A load leveler is always nice when pulling the trans out with the engine especially if the radiator is still in the car. Nice pic, blkcobra50. Is that your stroker motor going in?
  11. 50FoxBodyGT

    who here sleeps regularly

    Ya, I start work between 7 & 8 so I'm not up real late. Back in the days of unemployment, though, woohoo!
  12. 50FoxBodyGT

    RWD in the snow

    Funny, I live in canton as well. Ford and Morton Taylor, near the new Ikea.
  13. 50FoxBodyGT

    first post from a newb

    Very nice fox! I'm fairly new to StangNet as well and have been trying to update my info that shows up to the left of my posts. How do you guys get pictures and location, etc, over there?
  14. 50FoxBodyGT

    My car's time of the month....

    I saw this on an ad once: TI-3VOM Read it as though looking at it in your rearview mirror...
  15. 50FoxBodyGT

    Called out RICEBOY!

    That has got to be the best analogy I've ever heard for a ricer! I'll remember that one....
  16. 50FoxBodyGT

    Boring a 5.0 +.060

    I think the 351 might have thicker walls, though. Not sure on that. What's the issue with over-boring? Is it that the engine will run hot or am I going to bust a rod or something through the cylinder wall?
  17. 50FoxBodyGT

    Boring a 5.0 +.060

    Hey guys, How do feel about boring a 5.0 to +.060? Has anyone had any good/bad experiences doing this? Is it just too much or will I be okay?
  18. 50FoxBodyGT

    3.73 Speedo Correction

    If found this site that sells gears and speedo driven gears. It appears the same speedo driven gear works for both the 3.73 and 4.10 We can buy it at the link. http://www.haneymotorsport.com/gears_and_accessories.htm
  19. 50FoxBodyGT

    3.73 Speedo Correction

    I have 3.73 gears in my Fox and the speedo says I'm going way faster than I actually am. How can I get it to display the correct speed?
  20. 50FoxBodyGT

    Fuel Injector Size Selection

    So, do you think my setup would benefit from upgrading to 24# injectors? How much hp would you estimate from 65mm throttle body, gt40 heads, and x-cam? I just bought the car and am in process of installing the heads. Maybe I should put some bigger injectors in while I'm at it? Hate to throw...
Top Bottom
Back
Forums
Menu