Search results

  1. 95snoozer

    How much timing is good on a NA car and what A/F?

    how are you tuning? if running stock fuel tables i would run 14 initial with 93 for a baseline. what heads? aluminums will like a lil more timing
  2. 95snoozer

    HCI swap done NEED HELP!

    honestly, I have run 2 separate setups with stock computer for 4 years e cam stock heads gt40ps with comp xe270 unless you have something else not hooked up or something messed up, it will run just greta by setting your timing normal and opening the TB with the screw to say 900 while the...
  3. 95snoozer

    heads questions and which heads?

    what is your budget for heads and cam? You can use any head you want, just get the right cam and it will make the power ....290+ with any good aluminum head there is no reason you shouldnt make 300ish rwhp unless you are missing key mods and you choose a crap cam.
  4. 95snoozer

    Popping In Exhaust Around 5,500 RPM

    search on summit the listing lists them at .600 lift instead of .540 ish
  5. 95snoozer

    Cheapo Tires! Whats good?

    sumitumos HTRZ are 95 bucks from tire rack in a 275
  6. 95snoozer

    Popping In Exhaust Around 5,500 RPM

    high performance... lol get the stage 2 springs, not stage 1
  7. 95snoozer

    Popping In Exhaust Around 5,500 RPM

    get the stage 2 springs if you even THINK it might have a stage 2 cam that is most likely your problem and its dangerous
  8. 95snoozer

    Popping In Exhaust Around 5,500 RPM

    valve float what cam? what springs?
  9. 95snoozer

    All the new parts are IN!!! ED CURTIS is the MAN!!!!

    man, my setup didnt look near as pretty as that when i put it together, but i guess it performed though ;)
  10. 95snoozer

    306cid camshaft?

    If you want you can pick up a "STOCK" cam one that is made by crower or AFM to the maximum tolerances of a stock cam. This is what class racers use to maximize every bit of hp
  11. 95snoozer

    306cid camshaft?

    move your powerband a lil higher. It will pull higher, peak higher and make more power. you could see 300 rwhp I would definitely do it
  12. 95snoozer

    T5 from fox

    i need something to get to work every day right now My shifter vibrates like one of those fake elictricution chairs at the arcades and bars. Once i work i can get something else.... but a stock or lil better than stock rebuild should do me fine since i wont be drag racing on slicks for a...
  13. 95snoozer

    T5 from fox

    crap, i need a different t5 to make the trip. It sucks that i am going to haev to pull this one and replace the tail shaft bushing and the rear seal just to possibly replace it in a few months. The tail shaft might be bent they are guessing... heck if i know, but it vibrated like crazy 70 and up.
  14. 95snoozer

    T5 from fox

    What differences if any are there? As long as I am using my Bellhousing and cross member, I thought everything was the same, but the guy i want to buy a beefed up one from says he thinks they are different
  15. 95snoozer

    306cid camshaft?

    did you ever retard your cam?
  16. 95snoozer

    306cid camshaft?

    better put a cobra on it or you are gonna slow down with a cam and stock intake/stock heads I would just leave your stock cam in there and maybe retard it 4 degrees with the cobra intake of course i ran a stock piston 302 with stock e7s and an e cam 1.7s and cobra and rpm intake. it worked...
  17. 95snoozer

    5.0 Explorer heads don't work?!?!

    definitely run a systemax, rpm II or trick flow R
  18. 95snoozer

    Nitto NT555R 315 drag radials, what tire pressure?

    18 psi whenever i go below 15 hot in my nittos they cup and traction goes away. 15 is where i run my 16s and 15s but everyone seems to run 17-18 on the 17s
  19. 95snoozer

    drag tires on the highway

    ah, you will be fine Inflate them to 30 psi for a solid ride, if not it sways back and forwarth ever so slightly like a snake. I have daily driven on et streets/drags/m&h/ nitto555rs 55rs make a great daily tire for utilizing your power on the street. MTs are king at the track. If you hapen...