Search results

  1. Adam95GT

    94 GT pinging, help please

    Do not use water............ You can get a vac gauge... Ive always used starting fluid or carb cleaner with no issues. You can also use an unlit propane torch.
  2. Adam95GT

    94 GT pinging, help please

    Have you checked your vac lines....?
  3. Adam95GT

    94 GT pinging, help please

    My first thought was a spun balancer... then I read he checked it. If you can get a video it would be great. I've had a shudder due to 02s going bad.... as well as pinging. As you stated going wot will force open loop and ignore the 02 sensors. You can also force open loop and check how fast...
  4. Adam95GT

    Should I buy a tweecer?

    Im considering writing and wiring up an arduino board so i can change the tune of my car through my cell phones bluetooth. But i didnt think anyone would be interested.
  5. Adam95GT

    What would you with 10k

    If it were me i wouldn't dump 10k in to a Daily driver mustang. Id go get a nice little honda fit or something. But if its what you want to do id just stick with a 5.0 mine had 220k on it and was still going strong.
  6. Adam95GT

    A post a day......

    Needs body work. Not worth the time I'd have to put in. Needs a fender, door and paint. I'm in at least 1k in materials. Then still have to figure out the starting issue.
  7. Adam95GT

    A post a day......

    That should say trans
  8. Adam95GT

    A post a day......

    I'm waiting for them to get back to me with mileage and transfer info. I was going to offer 1200. Does anyone know if there is a way to get a temp tag without transferring the title? Just so I can transport it to NJ?
  9. Adam95GT

    Which MidPipe?

    Yes long tubes are worth it. If your even considering them now, that means you will be wanting them down the road. Might as well get it done now. long tubes are finicky you should get the same brand long tubes and H or you might have fitment issues. BBK HIGH-FLOW H-PIPE FOR USE W/ LONG TUBE...
  10. Adam95GT

    A post a day......

    1995 mustang gt Should i just get this pos and put my spare ditsy in it lol.
  11. Adam95GT

    A post a day......

    Would probably buy a used motor and trans they only go for $300 each for this car... Hell a new engine is $800 on a pallet.
  12. Adam95GT

    A post a day......

    Thats not the way i do things. Im completely honest about what i sell, even to much at times. (i end up saying every little problem something has and the person decides to buy elsewhere, Then they end up getting an unknown POS part) I also like to help people out it makes me feel good about my...
  13. Adam95GT

    A post a day......

    Im pretty cheap to man... :rlaugh: Its a good thing.
  14. Adam95GT

    A post a day......

    Focus has 186k on the clock. I have no money but i think its time to start looking for a new car. The thing does not burn a drop of oil but the interior is beat and the body is showing its age (keyed a year ago and has a few small rust spots) it also has a salvage title and the old body work is...
  15. Adam95GT

    Tips for removing headers

    Jack up the car and support with stands. Get under it with a 1/2'' drive and some long extensions a few 6's and a 10 will do... You can use 3/8'' but make sure you soak them in pb blaster and let them sit first. You may need a breaker bar.
  16. Adam95GT

    A post a day......

    Sunday: I notice the focus is low on power steering fluid... I figured i had a slow leak seeing that it was low 2 months ago as well. So i filled it up and all is well. Monday: Im driving down to md from NJ when i hear my power steering pump starting to whine. I pulled over and opened the hood...
  17. Adam95GT

    94 GT pinging, help please

    Nevermind.
  18. Adam95GT

    A post a day......

    Im burnt up bad to man... focus left me stranded twice this week. after i cleaned up:
  19. Adam95GT

    A post a day......

    AI vs. AI. Two chatbots talking to each other - YouTube im scared.