Search results

  1. C

    Wire confusion

    With the ground you are better off going straight to the block. With the PMGR starter you need two wires going to it as it has a solenoid on it like the GM starters do. You need the 1 heavy wire for the main power and 1 smaller wire to trigger the solenoid on the starter. The diagram shown is...
  2. C

    Body and interior work done before roll cage?

    Do the headliner before the cage. It's a pain in the a$$ as it is, the cage would only make things much worse. IMO Tim
  3. C

    One for the MII class...

    Very Nice Jon!!! Congrats!!
  4. C

    look at this bad boy

    :lol: Sometimes you just have to bite your tongue when people say things!!!!! :rlaugh: :rlaugh:
  5. C

    I love the Mustang II

    I'd just love to have one extra one removed from my garage!!! :rlaugh: Sorry Mike, you know I had to do it. Tim
  6. C

    Trans filter

    The standard II pan is deep than most stock C4 pans. I've even seen a couple with factory installed baffels. If your stock pan is deeper than your chrome replacement than you likely have troubles with the Stock II filter. You can switch to the other filter without any issue. But remember that...
  7. C

    302/351 timing cover seal

    Unfourtunatly no. I only know only one of the ones I have is a front install and it is for a late model van (84ish) and it's got strange things around where the timing marks are.
  8. C

    302/351 timing cover seal

    It all depends on the cover you have. The older cover the seal was installed from the backside. The newer covers install from the front. You'll be able to tell which one you have as soon as you get the balancer off. Have fun! :D Tim
  9. C

    who has bought parts from.....

    C.A.R is definatly a good guy. I have placed several orders with him with no complants. As for Rebel, I personally will never deal with him again. I did some swapping for parts, I sent him parts and $. I took me quite a long time and eventually the threat of legal acton to get everything...
  10. C

    why do you guys....

    You got you high boots on too Mark? :nice: Tim
  11. C

    Blackout

    Ok, I was wrong. What, you want a cookie? :D
  12. C

    Gorgeous King Cobra on Ebay!

    Good Eye Sal!!!! :rlaugh: :rlaugh: Tim
  13. C

    Gorgeous King Cobra on Ebay!

    Nice catch on the rear seat! I knew about it but didn't even see it. I knew the wheels were incorrect, and noticed a couple of other things but I wasn't going to pick it apart but yeah you are right. A lot of things are not even close. Like you said it was made form other cars I'd bet both my...
  14. C

    Gorgeous King Cobra on Ebay!

    Someone correct me if I am wrong, I thought all of the later cars had 85 MPH speedo's. Nice car not completely "correct" but not a bad try.... If I were looking to buy I would rally like to see a shot of the buck tag.
  15. C

    Starter probs

    The starter is bolted to the transmission bell housing. I recall you just had some transmission work done? They might not have gotten everything tightened up all the way. I'd look there first. Tim
  16. C

    Yesterday was a happy day!

    D, That's not the Power Steering cooler. Those are the A/C lines. Another II with out a PS cooler. BTW Andre Simply Beautiful! PS: I am still looking for your seals.... Tim
  17. C

    combustion problems - HELP

    I popped a dist. gear roll pin a few years back. I couldn't figure out what the problem was as I just drove 45 miles!! Turned a corner and pop..... BANG! I it sounded like a gun going off. I parked and pissed with it a while and found nothing. Every once and again it would go off like a gun...
  18. C

    Now THIS is Sweet! (finally got it home) white/gold

    Looks great man! Very nice job. Tim
  19. C

    Seal-4-Good?!?!?!?!?!?! I'll be the judge of that.....

    The "stage 8" bolts are a bolt with a ring machined around the bolt head you slip the "C" shapped washer over the bolt head once tight and then hold the washer on with an "E" clip they work awesome for headers. I have also used the Aluminum collector gaskets and with pulling the H pipe off to...
View older results
Top Bottom
Back
Forums
Menu