Search results

  1. PNY PWR

    Help me run 13's on Friday!!!

    I ran a 14.1@99 on street tires with 3.73's. After throwing on the DR's it went down to 13.7@99, 60' dropped obviously. It's going to be all about your launch. You just have to work the clutch and throttle together to go as hard as you can w/o spinning too bad. Even with traction and the...
  2. PNY PWR

    Went to track last time this year,,new Best ET

    Nice AOD time, good work
  3. PNY PWR

    charcoal canister installation

    I removed my canister when I got rid of the smog pump. Just left the line from tank to vent in the fender well by the air filter with no problems or gas smells. What you're talking about is the purge control, the ecu will allow the trapped vapors to be burned at certain times. When the car...
  4. PNY PWR

    Heater core nightmare

    50resto's got what they call a HD replacement :shrug: http://secure.50resto.com/product1.cfm?SID=1&Product_ID=1055
  5. PNY PWR

    Motor Mounts/Tranny Mounts

    I'm running just the poly tranny mount right now with stock motor mounts (haven't gotten to them yet) Haven't had any problems and that's even with using drag radials at the strip and a 1.9 60' time. It will be said that you'll break the bell housing just to let you know. Don't need to jack...
  6. PNY PWR

    HOW DANGEROUS IS REMOVING THE BUMPER SUPPORTS?

    I think you're totally wrong. The guy wants some good advice on a safety issue. All you can do is be sarcastic and make the stupidest post EVER. You're an idiot.
  7. PNY PWR

    HOW DANGEROUS IS REMOVING THE BUMPER SUPPORTS?

    It's just my garage. Those lights are mounted above the work bench, they were there when I bought the house. That compressor is pretty decent, it's oilless and very loud though.
  8. PNY PWR

    HOW DANGEROUS IS REMOVING THE BUMPER SUPPORTS?

    Here's a pic of my home made rear bumper cover support. it's aluminum and might stop a bicycle rear impact :rolleyes:
  9. PNY PWR

    bypassed smog pump and now it seems to be a little bit slower

    I've heard several times about problems with just bypassing. I removed the whole enchilada and have no problems.
  10. PNY PWR

    changed ball joint....no more squeaks...

    cool, glad you're fixed up
  11. PNY PWR

    Lifespan of 5.0L engine?

    160,00 on mine. Who knows how long a 5.0 would last, a long time if well maintained that's for sure. Simply an awsome engine IMO.
  12. PNY PWR

    HOW DANGEROUS IS REMOVING THE BUMPER SUPPORTS?

    I took my rear bumper and mounts off. Not sure about the hazards, It's probably more dangerous. Main thing is if you get rear ended hard it's going to cause alot more damage to the car. The mounts are like shock absorbers, The car itself will take the impact and will probably total it. Not to...
  13. PNY PWR

    The best heads for my combo??

    Are you running 1.6 rockers? That will make a difference. You can also call/email AFR or trick flow and ask them to be sure. [email protected] Phone Number 330-630-1555 http://www.airflowresearch.com/support/sbf_5.htm
  14. PNY PWR

    crickets???

    Mine's doing it too, not very loud, just noticable to me. I'm gonna let it go for a while.
  15. PNY PWR

    Gear help

    I just went from 2.73's to 3.73's not too long ago. Very good investment, here's a pic of inside the rear end, you can see the ring gear to left and the pinion gear low center back behind everything. Those are the gears you change out, pictured are 2.73's.
  16. PNY PWR

    The best heads for my combo??

    The Demon and new heads is going to scream :nice: I think these heads would work http://www.airflowresearch.com/pages/185sbf_strp.htm
  17. PNY PWR

    FREE STUFF

    Pretty cool free stuff
  18. PNY PWR

    clutch questions

    A stock clutch would work but I'm not sure it would last too long. I have the FRPP clutch and it works pretty well, very hard pedal though.
  19. PNY PWR

    Motor Mounts/Tranny Mounts

    Also poly mounts will last alot longer and are impervious to oil and such which will break down a rubber mount and cause failure. You won't really notice much more vibration with the poly mounts, they are fine for a daily driver. When you get into solid mounts then you tend to get the vibration...
  20. PNY PWR

    Serpentine Belt Replacment Question

    I've never actually seen or heard of a 5.0 with dealer installed a/c :shrug:
Top Bottom
Back
Forums
Menu