Search results

  1. gearheadboy

    Fox Oh Those Little Details!

    Has my approval.
  2. gearheadboy

    Are These Gauge Pods Still Available?

    Ebay got everythang
  3. gearheadboy

    Build Thread 1978 Mercury Cyclone. The pig is in the pen.

    :crazy:
  4. gearheadboy

    Conflicting Stories On Using A9p For Mass Air Swap

    I have an A9p in my car. Works great. However not to confuse you but my 88 was a factory Cali mass air car and was an AOD car which is now a T5 car. I've read the o2 sensor harness info on other threads. Do some research. You can burn the box up if you have the wrong o2 harness.
  5. gearheadboy

    Engine Head Gasket Swap... Questions Within

    Kinda like this. NO orange.
  6. gearheadboy

    Engine Head Gasket Swap... Questions Within

    Me personally I always put a "smeared with my finger" amount of RTV around the intake and head sides of the intake gasket. Only exception would be NEW heads and NEW intake. And I'd still consider it. I run a circle around the head port, down and make the end seal out of goo, and up and around...
  7. gearheadboy

    Bent Pushrods, Floating Valves?

    Nicely broken block. You just purchased this car correct? Block broken, crank broken, cam and crank no longer in sync. He shoots, he scores.
  8. gearheadboy

    Bent Pushrods, Floating Valves?

    Hello? Pic of the back of this.
  9. gearheadboy

    86 Caster/camber Plates Install ?

    I'm not sure what you are saying. Your numbers make no sense.
  10. gearheadboy

    1987 Gt: Brake Line Fittings Spec (driver's Side Hard Line)

    They are metric. Next I think they are inverted flare however back one out and look to be sure. I very often reuse the fittings off of my brake lines on the new lines and add the flare. Pretty certain an ISO flare or bubble flare was too new of an idea to American cars in 87. The first I...
  11. gearheadboy

    Bent Pushrods, Floating Valves?

    Balancer snapped off? You don't need to disassemble the motor for that. You mean the crankshaft broke? That's why you bent push rods. The end of the crank that has the chain was out of sync with the cam.
  12. gearheadboy

    Engine Head Gasket Swap... Questions Within

    IMO and from 20+ years of experience, blue RTV has no purpose. EVER. Right stuff in the gray or black higher end ones are the bomb. I love me some "Big Daddy" Don, but their stuff is not together very long. I wanna seal it up and never mess with it again. In all honesty I never use ANY red...
  13. gearheadboy

    1989 Gt Half Throttle Stumbles And Chokes After New Exhaust

    Unhook exhaust at headers and see if it is fixed. If not or before that try a light tap on the top of the TPS sensor. I had one act similar once with a bad TPS.
  14. gearheadboy

    Head Gasket Repair + Performance Goodies

    Ratchet, socket, bolt in center of crank pulley, turn engine with ratchet. The piston tops do not need to be spotless. Wipe um, scrape um a little with a razor blade if you wish. Do not scratch the cylinders or spend 2 weeks scratching at the top of your pistons. Clean the engine deck surface...
  15. gearheadboy

    Post pics of how your foxbody currently sits

    I call them stomp lights.
  16. gearheadboy

    Post pics of how your foxbody currently sits

    LOVE IT! Just do me one small favor before I come over to visit..ditch the yellow plastic shield on the trouble light. You get blinded more than it helps.
  17. gearheadboy

    Build Thread 1978 Mercury Cyclone. The pig is in the pen.

    You know he has tapatalk on his bag phone. Probably blowing up with notifications.
  18. gearheadboy

    Build Thread 1978 Mercury Cyclone. The pig is in the pen.

    Oh this is getting UGLY now :hide:
  19. gearheadboy

    Emergency! Sos! Life Or Death!

    Jack it up and wiggle. If nothing pull the wheel. You gotta work a little to find the problem.
  20. gearheadboy

    Emergency! Sos! Life Or Death!

    Caliper is falling off or the wheel is.
Top Bottom
Back
Forums
Menu