Search results

  1. dollarbill

    going for lower gears 3.23 down to 2.73

    I would start by giving the car an entire tune up. Plugs, wires, clean maf, iac, etc...Also change all your fluids over to synthetic, they will help with your rolling resistance. Also a drop in K&N and some underdrive pulleys will help. Tire pressure can also help, up it to 35 psi cold instead...
  2. dollarbill

    just picked up some seafoam, quick question.

    click this: http://forums.stangnet.com/showthread.php?t=561567
  3. dollarbill

    Getting Steeda Springs installed. Bumpstop?

    I agree with twogts4us, just take the stock bump stop off and cut about half of it off and reinstall it.
  4. dollarbill

    My times at the track suck.. I need help

    They mean take off at a higher rpm, but don't let the clutch all the way out. Ride the clutch about the first 15-20 feet before letting it all the way out. It is real tricky to get it right, I prefer to just drop it at 2k and feather it as traction allows. But with my method the best 60' I ever...
  5. dollarbill

    My times at the track suck.. I need help

    When do you shift? You should shift at 5300-5500, a mostly stock 4.6l falls on its face after that. BTW at the 1/8 mile track I go to at 740' a bone stock 99-04 5 speed runs 9.3s at about 79-80. I sure a dyno tune would help a lot, I didn't see one in your sig. Also are you still running the...
  6. dollarbill

    Do I have an aftermarket Plenum?

    Yea, its a c&l, it says it on the side. Not sure what brand the tb is...
  7. dollarbill

    Fuel Pump Upgrade and Questions

    I have the Walbro 255 lph high pressure pump (gss340) I also have -8an feed line all the way to the fuel rail. You don't want to know why i did this but I've been told since I installed a bigger feed line it should support 500+rwhp. I may never find out, but I know I won't be running out of...
  8. dollarbill

    next mod? help me spend the $$$

    Shifter, and underdrive pulleys....
  9. dollarbill

    Anyone running a return style fuel system?

    You can check the resistance of the coils, but thats about it. If you only had 34 psi with the vacuum off then its low. When you crack the throttle does the pressure drop off? It shouldn't, especially when no load is present. Replace the filter and check it again. It could also be the regulator...
  10. dollarbill

    Anyone running a return style fuel system?

    Yes your fuel pressure is low. I could be the pump or the regulator. While running, pull the vacuum line off the regulator and see what it goes up to. It should be close to 50 with the vacuum unhooked and 35-45 with it attached. I have mine set at 40 with vacuum. It may also be the filter, which...
  11. dollarbill

    rocker arms and valve springs

    They are probably just worn out and can use a good rebuild with a valve job and port.
  12. dollarbill

    Tire Size

    I've been really happy so far with these: http://www.tirerack.com/tires/tires.jsp?tireMake=Fuzion&tireModel=ZRi&vehicleSearch=false&partnum=74WR7ZRI&fromCompare1=yes&place=4 They are a cheaper Firestone/Bridgestone product.
  13. dollarbill

    96 Cobra Dynoed today.....terrible numbers!!!!!

    Not too much more than 178, look at my mods and times.
  14. dollarbill

    Should I get aligned NOW or LATER

    Just get the alignment, some people don't need the cc plates and some do. I don't have them but when I put the 275s on the front I started to feel the bump steer, which I corrected. The alignment will tell you how far off you are.
  15. dollarbill

    Tires

    I have these 275/40/17 all the way around, very good tire so far. http://www.tirerack.com/tires/tires.jsp?tireMake=Fuzion&tireModel=ZRi&vehicleSearch=false&partnum=74WR7ZRI&fromCompare1=yes&place=4
  16. dollarbill

    flywheel question

    If the 8th digit in your vin # is a X then you have a Windsor block which has an 8 bolt.
  17. dollarbill

    Catback Install help needed

    Hell yea, cut that rusted crap off and buy an off road X and some MIL eliminators and be done with it. Sorry but from the pics it looks as though your ride is a Rustang. LOL.... :flag:
  18. dollarbill

    3.73's installed today, and...

    I agree with this dude 100%. Change the fuild and add the Royal Purple. The side of the bottle says it already contains the friction modifier, and yes it could be causing the whine.
  19. dollarbill

    Need help quick; belt tensioner issue

    Take those nuts off and it should come off. Oh, I see there is no slot for a ratchet to take the belt off. Hmm... try using something else, or maybe a friend can help to spring the tentioner. The hole looks threaded, maybe thread a bolt into it and use a coresponding socket to spring it.
  20. dollarbill

    gear oil

    I recently read the side of a Royal Purple bottle of gear lube and it says it has friction modifier already. Would it screw it up to add more?
Top Bottom
Back
Forums
Menu